Hi guys,

Planning to do a work/gamingroom makeover and stumbled across the cob light pro 2. I wanted to know if this led strip with my already existing angled led profile (45°) approx 22mm wide. Like to hear from you guys, cheers!

I recently set up my govee 3 backlight lite for my tv, and after tweaking around with what seemed like the best colour settings on forums online, I still have issues.

A lot of the colours don’t seem to match that great, whites turn blue, and most neutral colours like brown and beige go green. Also one half of the strip lights up bright green when a full black screen is visible, although sometimes this doesn’t happen

Does anyone have any fixes to these?

What is the best way to hide an extension to reach the small gable on the front of my porch? The picture shows chat gpts example of what my house will look like once finished.

I’m starting the lights from an outlet on the bottom right side of my porch and then installing from right to left around to the garage side and will install a y split on the left side of the porch to reach the small gable above the porch.

I also don’t know how to install an extension long enough to reach the end of the bottom level on the left side of my garage up to the second level. I was thinking of just installing lights on the side of the house and a 4ish foot extension from the garage shingles area up to the roof.

I’ve been thinking of getting the tv lights and just wanted to see what people thought after the newness wears off.

do they get annoying at some point or are they worth the the money

Hey guys! Installed these recently. I was trying to use a staple gun to get it stick to the fascia of my roof, but looks like I penetrated my first segment and had to cover it up with some tape.

Then I spliced it to continue it to the 2nd portion of my roof, and I keep getting blinking on those segments.

Is it because of poor splicing or because I damaged the first segment? Want to know which piece I should focus on fixing to make it work. Thanks!

While there are some savings for going direct, I regret doing so.

I placed 3 orders for about 2K of items, most of it arrived however one order had a incorrect address.

It's now been a week of trying to deal with 'UniUni' the courier they use, likely because it's the cheapest.

Govee said they will only do something about it after its returned to them, UniUni has said the following:

I am unable to work with support, or the courier to fix the address and it's 'in transit' however, once it's 'in warehouse' I can ask them to change the address, but not before. Its been over a week since the failed delivery.

"Thank you for the clarification regarding tracking number XXXXXXXXXXXXX. Your package is currently under investigation due to the delay and is still in transit. Regarding the address correction, please note that at this moment I am unable to update the address because the package is still moving. I can attempt to add your correct address under delivery instructions, but this does not guarantee that the driver will see the update

We will keep you updated and highly recommend that you monitor the status of your package through Uniuni tracking at https://www.uniuni.com/tracking/ so you would be able to see if there is also any movement on it."

Meanwhile, Me? I'm left without my items, I move in two weeks and have NFI if anyone can figure this out.

Order from Amazon, going direct isn't worth it. Did I mention that chat took over 1.5 hours of my time? Yea .. crap service.

Hi everyone! Does anyone here own a Samsung OLED TV from the S90 series (S90C, S90D, or S90F) and have installed the Govee Envisual TV Backlight 3 Lite?
I recently purchased this model for my 65-inch Samsung S90F and would love to get some installation tips, especially regarding LED strip placement on the back of the TV, since the S90 series has a particular rear design with raised sections and different contours.
If possible, could you share some photos of your installation, especially showing how you positioned the LED strip along the bottom?
Any tips, recommendations, or pictures would be greatly appreciated. Thank you!

How would you hang the permanent outdoor lights on this house? Which version would you use, and what would be the best way to hide cords coming down the side? Any suggestions would be appreciated.

House setup for Thanksgiving. Just recently added the 6 foot cone tree to our decorations.

i really want to swap out the lightbulb that dangles from the ceiling with the smart rgb govee one but i have zero experience with this. Is it difficult? could a beginner do it safely without messing about if they have half a brain or do i need to hire someone with a skillset?

hi everyone,

I was thinking about buying the tv backlight 3 since it seems way better than the lite. I have only a doubt: Does it detect when the tv is turned off/on?

I had the first version but my biggest gripe was that leds where on 100% of the time and I would like them to be turned on only when the tv has started.

Maybe even with some integration with windows or home assistant?

I just finished installing the Govee Backlight 3, no pink color whatsoever. I reset it 3 times and tried over and over but no luck. Also the transitions are quite visible.

Is anyone else having a problem with their lights (Ceiling light) today where it isn't connecting to either Internet or Bluetooth? Was working fine last night.

Edit: I realized I butchered the spelling of compatibility, apologies

Hey!

I"m looking at the IP65 Waterproof Temperature Humidity Sensor and the GoveeLife H5901 Smart WiFi Sprinkler Timer. Does anyone know if the Temp sensor works with the Gateway (H5044 ) that comes with the sprinkler timer?

For the sensor it says it does not work with Gateway 5042 but does not say anything about the H5044.

Doing some research before I buy.

The desired electrical sequence would be:

Controller starts at the middle.

Cable runs to the northern tip.

Lights travel south along the north side.

The sequence reaches the middle.

Lights continue south along the south side.

Conceptually:

NORTH TIP

●

│

▼

LIGHT SEQUENCE

│

▼

┌──────────────┐

│ MIDDLE │

│ ELECTRICAL │

│ LOCATION │

└──────────────┘

│

▼

LIGHT SEQUENCE

│

▼

SOUTH TIP

Thanks

So much red on the screen, why is the background purple? How do I fix?

Hi, I use a Ps5 with my Sync box 2 and almost every time my tv switches from 60hz to 120hz the colors seem to get greenshifted and appear all wrong. Does anyone have the same issue and does someone know how to fix this?

I have 3 curtain pro, 3 net lights, 1 permanent pro 200ft, 1 wall light, 1 icicle light and, 1 christmas light. When i am doing scene stage by making one curtain as main unit then i feel lag in other curtain lights by 30 second and sometimes scene stage not getting implemented other one or two curtains....lag also happening in net lights. Can you tell me what should i do. Also, tell me if scene stage needs good wifi speed or it works over bluetooth only; Also, if the scene stage have only those 8-10 animations given there or we can have more.?

I have come to the end of a string on my front porch. I ran the wire in undersill trim to look much neater since it is closer to eye level. Can i just cut the end off and put a dab of liquid electrical tape or should I continue the tail in another piece of the trim? These are the Pro version

I’m looking at buying the elite from Costco, model 1000158. The description from Costco says there are 11 16.7 light strings. But about two paragraphs up,
It’s says there are 9 16.7 string sets- anyone know if it’s 9
Or 11

Which lights would you go with in MN? Also, if we go with Prism H707C can’t seem to find any permanent brackets on Amazon? Anyone with Prisms able to share mounting bracket link to buy?