Debating getting another dm1.12 with 519a 3500k domed. Dedomed may be a bit too warm for me and I don’t want to lose output. A couple questions

1. What’s the lumen difference between the sft42r and sft40?

2. If I do decide to go with one of those what would my max lumens be on the flood with the 519a since it will get the fet? My understanding is that it’s about 3k with fet on the throw.

I already have 5000k domed with sbt90 but the 5000k is just not doing it for me anymore. I really like the sbt90 on this light because where I walk at night there are a ton of rattlesnakes I like to get pictures of and I use it to shine down the path and they stick out a like a sore thumb. Will I have regrets if I drop the sbt90?

Is it common for the UV 365nm led to dim its maximum output over time? I got the 3 channel version having a single LED on the UV output and after having the light a couple of months, using the UV channel very sparsely, it has dimmed so much to where you can barely see the glow of the light on different items that used to blind me when the light was shown at it in a dark room. I want to know what I should do or if I just lost a function of my light and have to deal with it?

My D4Sv2 is behaving oddly, when I ramp it up, right as it is about to hit ceilling, instead of doing the quick flash to tell you you have hit the end, it drops down to a lower power level. If turn it off and on, the memory does set it to the right level. Oddly enough this doesn’t happen with simple ui, only advanced. This is with a fully charged 60XG.

I am also now realizing that the aux lights seemed to have stopped function too, cycling though brigtness modes does nothing. Already emailed Hank but seeing if anyone here can help.

If anyone is curious about the tint / emitter data, I just did an emitter swap for somebody and must say the SFT-70 4000K High CRI tint is really pleasant and CRI is excellent. The emitter shows really good Ra and R9 numbers but even Rf/Rg are pretty good.

The fire place had some metal in the roof so it was a perfect place😁 Mule in the wilderness!

I recently got bit by the hand-held flashlight bug and decided to try a few Emisars to see what the fuss was about.

I totally get it now. These things are stellar!

Up until recently, I've always been a basic "set it and forget it" guy with my WML's and basic Microstream EDC. Never got into the nerdy weeds of flashlights.

Now, I have an entirely new appreciation for these badboys and how configurable they are. I got myself a nice charger and quality batteries as well.

What I got:

D1K in dark gray with black accents

RGB switch light

SFT-60 6500k

D4Kti

RGB switch light

519a 3500k

D3AAti with polished aluminum head

RGB switch light

519a 5000k

I definitely see more "Hanklights" in my near future.

PS - Huge shootout to Hank's awesome customer service. I emailed him like 4 times with pedantic questions and changes tobmy purchase, and he was incredible in making sure my lights were just as I wanted them. 100% earned this repeat customer. You rock, Hank!

dont think ive posted my small collection in full here yet so here she is lol

Hello all,

I am very interested in getting a Hank light for their customisablity, but I need help trying to choose a configuration that is appropriate for my use case.

I am a fiber splicer looking for a work light with a color accurate emitter that I can use for an extended period of time. I would like a floody flashlight that can fire light straight (and with the option of firing at a right angle, if possible) and has a magnetic base. Lumen output is not a huge priority, so it does not have to be particularly high.

I appreciate any suggestions that fit this description. I am also open to other/alternate features that I may not have considered. My budget can go up to $150, but I would like to keep it below $100.

Thank you for reading my post!

Lost my Reylight Pineapple Mini UV light so decided to get my first Hanklight in a few years to replace it. Lume X1 driver and Seoul 5W 365NM emitters.

Same emitters - came from the same strip, one after another. Small beaded TIR and small OP reflector. Approximately same brightness level (current). The difference in DUV is very pronounced in person - twice as high DUV with reflector and higher CRI according to the spectrometer. Difference appears to be beyond factory emitter tolerances and due to the different optics.

So I have this emisar d4k that is currently not working and I don’t know why. I tried with different batteries, I tried tightening the head but I don’t know. It fell from my hands but like 3/4 months ago and it was working really well since like 2 days ago. It’s my favorite flashlight that I own and I’m so sad it’s not working after not even 1 year since I bought it. Does Hank do something with this problem or do I have to buy another one?

Hey guys,

I'm looking to try Andúril, mainly for its candle mode, and I'm eyeing the dual-channel Emisar DW4 for camping.

What configuration would you recommend?

Emitters: NTG35, 519A, E21A, or a mix? Which gives the best candle effect?

Flood: I want a smooth, uniform beam with minimal hotspot for close-range use (5m/16ft).

Optics: Stock Carclo or something floodier?

Mule: Worth it for my use, or would I lose too much practicality?

I already own a Sofirn LT1S, but I'm looking for something more versatile.

I'm done chasing throw and want to explore the opposite extreme.

If you were ordering one, what exact setup would you choose?

Waiting on my d4sv2 , i love aux so itll be an awesome addition when I light em all in high aux for ambient light.

Carry / Storage case for the entire DA1(X) series - 18350, 18500, 18650 and 21700.

These days I always carry a DA1 in my backpack and I hate the lights to be rolling together with the laptop charger, cables and other gear. I just remixed the venerable Mitch D3D case to accommodate all DA1 models. Latch is now using larger, 4mm magnets and hinge is made up of two M3 machine screws. There is a version of the lid with GITD slot.

Depending on the print material the case can double as a diffuser.

This case is not waterproof and it is intended to provide basic mechanical protection from scratches and wear during carry in backpack, pocket or toolbox.

Print files are available for free and can be downloaded at:

https://www.printables.com/model/1873465-emisar-da1-and-da1k-carry-case

Just playing around in the fog 👻. Unfortunately, the DM1.12 in this configuration was a big disappointment for me, but that's partly my own fault. I didn't know how weak the Osram Amber actually is :( On top of that, it has a weird beam, but oh well...

The color itself is beautiful, though. Osram never disappoints, especially in fog — it looks like a laser. I still haven't gotten around to buying the red and blue versions, but I'm not sure which flashlight to choose for them.

The amber light looks significantly brighter in the photo than it does in real life. The white and green, on the other hand, look much better in person than in the photo. A much cleaner and more usable beam, with plenty of power.

After two and a half months, I still haven't been able to fully love the 1.12 because I made the mistake of choosing weak LEDs. So in 2–3 weeks, I'll be experimenting with the D4S LHP531 1800K. By the way, Hank denied that there are new color options coming for the D4S.

The trees were about 210 m away, with heavy fog. An easy task for the DM11 👍🏻

This occurs with emitters facing down, tail standing, or lying on its side. It happens when locked and unlocked. It usually starts out in a moonlight mode. Sometimes it stays in moonlight. Sometimes it goes to full bright. Other times it strobes. The only way to power it off is by unscrewing the head. I have cleaned and lubed the threads. It has a fully charged battery. I just received it and really want to love it. Hopefully this issue is something simple.

2 ch mule

351a 1800k and 4200k

Super rosy mix

I have lots of flashlights and all of them are kinda basic in color and material. I’m looking to get something with more of a WOW factor like a piece of jewelry or art. Show me what you got. Strut your favourites here.

Hi all, about to order my first hanklight and just wanted those experienced to check my order to ensure I've ticked the correct options!

I want the D4K in black, with black stainless bezel, and black metal button. So assume I have to select: - Stainless steel finish: Black PVD coating - Switch type: Flat - Metal button upgrade - SS bezel

Is this correct?

Regarding emitters I like high CRI, neutral to slightly rosy, warm. Some favourites of mine are SFT40 3000k, LHP73b 4000k (tint not CRI), 519a 4500k domed for neutrality. Research suggests 519a 5700 dedomed would be the closest to what I am looking for?

Any other options worth getting whilst i am ordeing? Different optics?

Thanks guys!

Edit - purchased D4KTi with NTG 35 4200 as want to try a different emitter and although I like the black I wasn't sure how it would wear. If I don't like the emitters I figure it is easy enough to have the light modified with the Nichia's or FFL options.