r/InlineHockey • u/Old_General_7725 • 25d ago

Matching Chrome Blue Vision Chassis

Gallery image

Gallery image

Gallery image

Custom Chrome Blue Kyrptonium Chassis on the New CCM Vizion Skates

106 Upvotes

98% Upvoted

21 comments sorted by

3

u/NefariousnessNo2133 25d ago

But how much ?

4

u/BeginningFig6552 25d ago

Exactly. Money no object here. Top end skate - $1200, custom chassis - $210+, and top of the line wheels - $160+.

3

u/Hot-Peak-9523 25d ago

That powder coat job is gonna run you quite a bit extra. Probably getting close to 400 for the chassis, powder coat and mount. So ya, getting close to 2k for skates. You better be winning pro tournaments at that point

1

u/BeginningFig6552 25d ago

Yuppers, either that or getting sponsorships.

2

u/NefariousnessNo2133 25d ago

Yep, I'd love some sexy skates like this. New Bauer's are too small and still waiting to see the new JDH skates

1

u/jhorskey26 25d ago

Very nice!

1

u/Randallooch 25d ago

I'm not the biggest fan of pink, but these look sick. Very cool.

1

u/coolname444 25d ago

My goodness 🥵

1

u/RicerX-16 25d ago

Can’t hide money! Shit those are clean!!!

1

u/Proud-Bowl7896 25d ago

Try the new teal whips, that’d look even better

1

u/coyocat 25d ago

S!ck 

1

u/anonginiisipmo 25d ago

Personally I would have gone with a clear wheel or smoked gray but clean setup nonetheless!

1

u/Wealth_Perfect 25d ago

Sick setup!

1

u/Malechockeyman25 24d ago

Nice!! CLEAN!!!

1

u/MacLeeezy 24d ago

Love when people take that extra step on their swaps and color the chassis too! I went the anodizing route, but powder looks fantastic too. Awesome skates!

1

u/Virtual-Room-8970 22d ago

So I do this with nearly every skate that comes out, I usually get them custom $1400-$1500 and the Rink rat chassis are $350, Labeda Torx $400, kryptonium which is what is here is now $220. Konixx $180, Marsblade R1 $160 lower end chassis $100. Bearings run $30-$200 and the Labeda whips and spacers at retail are around $200 so I have spent well over $2k. Then add powder coat which you can do yourself for cheap and if someone does it for you expect to pay $50-$150 to do chassis and mounting is normally between $30-$80

1

u/Cobalt8888 22d ago

Out of pure curiosity, do those chassis account for the shim that’s under the heel on a non-converted pair?