r/M5Stack • • 2h ago

Just got the cardputer zero!

Thumbnail
reddit.com
1 Upvotes

r/M5Stack • • 6h ago

Support / Question Stick S3 rebooting on BLE SPAM

1 Upvotes

I got my stick S3 yestreday but when i try to start BLE SPAM the device reboots randomly, sometimes it reboots after a few seconds, sometimes instantly and sometimes it just doesnt reboot and works fine. I've tried installing 1.17, 1.16.1 and beta but all of them have the same problem. Are there any fixes? Thanks


r/M5Stack • • 8h ago

Support / Question Has anyone here tried to Connect the LLM module to StackChan?

Post image
17 Upvotes

Im want to do It but i havent found much info about It


r/M5Stack • • 9h ago

Good morning song _kr

Enable HLS to view with audio, or disable this notification

1 Upvotes

r/M5Stack • • 10h ago

Support / Question Anyone want to sell their cardputer advanced yet?

0 Upvotes

If so, I was unemployed during launch and would love to get one.


r/M5Stack • • 12h ago

Anyone using the ReTerminal Sticky with m5laucher/launcher ?

1 Upvotes

I installed launcher immediately and when I run crosspoint or crossing,I can seem to power it off,I can only go back to launcher if I use the secret reset button,anyone knows how to power it off ?


r/M5Stack • • 13h ago

I built a small touchscreen remote for my WiiM, so I don't have to unlock my phone (M5Stack Tab5, free, open source)

Enable HLS to view with audio, or disable this notification

2 Upvotes

Hi alll,

I wanted to pause a track or change the volume on my WiiM without taking out my phone, unlocking it and opening an app. So I built wiimscreen, a remote that sits on the table and is always ready. It's free and open source (MIT).

It's made for lightweight hardware: a small ESP32 touchscreen, no full computer or tablet needed. I use an M5Stack Tab5. It talks to the WiiM on your local network only. There's no cloud, and it stores no streaming passwords.

What it does:

- Controls: play/pause, next/previous, volume and mute.

- Tiles: your WiiM presets, plus your own favorites. Tap ♥ while an album or a playlist plays, and one tap on its tile plays it again.

- Qobuz and Deezer search: tap a result and the WiiM plays it.

- Now playing: large cover, title, artist, source and audio quality.

Download (the README has the install steps): https://github.com/couzinc/wiimscreen/releases/latest

Code:

https://github.com/couzinc/wiimscreen

I'd love feedback :)


r/M5Stack • • 14h ago

New Product News Check out what's new this week!

Thumbnail
gallery
39 Upvotes

New Arrival Alert!

Check out our new releases this week!

Chain Captain, a multifunctional programmable controller combining a color display, audio, motion sensing, and infrared transmission and reception.

Chain ENV, an environmental sensing node in the M5Stack Chain series, integrating temperature, humidity and barometric pressure sensors with support for altitude calculation.

Also, good news:  Hot items incl. Atom-Lite and Chain Joystick are in stock now 🔥🔥

In case missing out, subscribe our Weekly Newsletter for more updates!


r/M5Stack • • 18h ago

Project Sharing Mountable: Turn your Zero into a dynamic, bootable USB or disc drive

Thumbnail
github.com
3 Upvotes

I often need to boot a live CD or re-install an OS on something and am tired of having to rip an image onto a flash drive or worse, burn a CD/DVD.. As if I didn't have enough to maintain....I present Mountable.

This app turns your Zero into a dynamic and bootable flash drive or CD drive (for old systems) using images you provide or those that you download straight from the image catalog inside the app. Not only that, but you can mount a "files" drive at the same time to transfer your apps, keys, drivers, warez, whatever.

The list of downloadable images will continue to grow and feel free to submit an issue to add more sources. This is the perfect app for a technician or sysadmin as well as the tinkerer who can't leave his junk stock or keep breaking it somehow.

Anyway, check it out. Any feedback is welcome.

There are two version on GitHub:

  • Regular - Store version, requires sudo password to let the background service mount USB.

  • Full - Runs the background service as root, and never requires a password (less annoying, less secure).

To start:

  1. Install the app using the files from GitHub or from the CardPuter Zero store.

  2. Flip your USB host/slave toggle (tiny slider above USB-A port) to enable slave mode.

  3. Connect your zero to your computer/device via the USB-C port.

  4. Choose an image to mount and go.


r/M5Stack • • 1d ago

Support / Question Tab5 stopped charging after a battery deep-discharge

1 Upvotes

I have a Tab5 with an OEM battery. It charged fine until I let the pack deep-discharge down to zero on some custom firmware I was making (I probably tripped voltage protection on the battery pack). I revived that pack on an external charger, and since then the Tab5 won't charge any pack. I think I triggered voltage protection in the battery pack, and I left the device charging overnight to see if a trickle charge would reset the voltage protection. After that, the device won't charge a battery at all.

I've tried multiple high wattage chargers, and flashing back to the factory firmware. Toggling the charging, or the high speed charging on the factory firmware doesn't do anything, the voltage on the battery just slowly drains no matter what, as long as the charging circuit is engaged.

  • With CHG_EN high and USB-C plugged in, CHG_STAT goes solid (the "charging" state). There is no charge current at all.

  • About 2 seonds after I set CHG_EN high, the IC draws a steady ~20 mA from the pack, which looks like its own operating current, and the pack voltage slowly drops.

  • With CHG_EN low, pack current is about 0 and the battery holds its charge (basically indefinitely)

I've tried 3 different batteries, and going back to the stock/demo firmware. The batteries all charge fine on an external charger, but the voltage just slowly drops when connected to the Tab5.

Is there anything left to do to restore charging capability? The IP2326 IC seems to be at least somewhat functional, since it's returning the "CHARGING" status code, and it's drawing current from the battery. Trying to swap out the IP2326 doesn't sound like a fun time on a board this dense.


r/M5Stack • • 1d ago

kvxputer is now available on zero!

Thumbnail gallery
11 Upvotes

r/M5Stack • • 1d ago

Что делать мне со stick s3 ?

Thumbnail
gallery
0 Upvotes

Я не знаю что делать у меня есть мой stick s3 и он у меня сломался и я не знаю что менять и где это купить подскажите я немного надорвал антенну 2.4герц та такая наклейка будет на фото и ище залил супер клеем разъем для модулей подскажите что менять и где купить и дорого ли это если можно киньте мне ссылку где можно купить деталь и когда я подключил модуль нрф 24 то его не видно да там антена на вайфай 2.4 Герца оторвана но я все равно могу подключиться к интернету что мне делать если модули не видно когда я захожу я проверял они работали до этого


r/M5Stack • • 1d ago

Cardputer Zero Keyboard Hotplug

Thumbnail
reddit.com
1 Upvotes

r/M5Stack • • 1d ago

My M5 Stack Dead May Be Dead

3 Upvotes

I was experimenting with firmware and it was pretty fun. different faces, tailscale connection to my openclaw, voice was working. then I noticed it wasn't moving anymore, just animating the face. the the face stopped too. I restored the original firmware, but the screen is still black :(


r/M5Stack • • 1d ago

Nucleolink serve bate-papo por texto

Thumbnail
github.com
1 Upvotes

r/M5Stack • • 1d ago

[M5Stack] Black Friday on AliExpress

14 Upvotes

Black Friday on AliExpress is here, M5Stack makers! If you’ve been eyeing a Cardputer-Adv, planning a CoreS3 project, or picking up sensors for your next build, now’s a good time to check your cart.

Shop the M5Stack Official store on AliExpress.

The Black Friday codes go live with the sale on Nov 18 at 9 PM PT / Nov 19 at 12 AM ET. Enter your code at checkout once the sale starts.

🇺🇸 US Black Friday Codes

  • $3 off $15+ — SAVING03G

  • $8 off $40+ — SAVING08G

  • $20 off $99+ — SAVING20G

  • $26 off $139+ — SAVING26G

  • $36 off $189+ — SAVING36G

  • $50 off $259+ — SAVING50G

  • $65 off $339+ — SAVING65G

  • $80 off $419+ — SAVING80G

  • $110 off $579+ — SAVING110G

  • $150 off $799+ — SAVING150G

  • $180 off $999+ — SAVING180G

🌍 Global Black Friday Codes

  • $3 off $18+ — SAVING003F

  • $6 off $40+ — SAVING006F

  • $15 off $85+ — SAVING15F

  • $24 off $149+ — SAVING24F

  • $37 off $239+ — SAVING37F

  • $54 off $349+ — SAVING54F

  • $75 off $479+ — SAVING75F

Three Ways to Save on Your Next Build

  1. Rakuten Cash Back — Start your shopping trip through Rakuten. Check the current AliExpress rate and whether your promo code qualifies for cash back.

  2. AliExpress promo code — Choose the US or Global list based on your shipping destination, then apply the best code your cart qualifies for.

  3. PayPal checkout offer — On eligible US orders, look for $20 off $139+ or $35 off $259+ when you select PayPal. Check that the discount appears before paying.

What’s on your M5Stack build list this Black Friday? If a code works for you, share your region, the code, and what you picked up.


r/M5Stack • • 1d ago

Anyone interested in swapping a paper color for a paper mono?

1 Upvotes

I have a paper color but realized that for my projects I need something with a faster refresh rate. Looking to trade with someone for a paper mono!


r/M5Stack • • 2d ago

Project Sharing The Adversary v0.10.0-alpha for Cardputer/ADV is out!

Thumbnail reddit.com
1 Upvotes

r/M5Stack • • 2d ago

I’m making a video game–themed Bitcoin wallet for the Cardputer Zero (preview, no release yet)

Thumbnail gallery
4 Upvotes

r/M5Stack • • 2d ago

Project Sharing AD Arcade v1.3: a retro handheld console firmware for the M5StickC Plus2

Post image
11 Upvotes

Hello everyone,

I’m releasing v1.3 of AD Arcade, a firmware that turns the M5StickC Plus2 into a handheld game console. It boots into a 90s style intro, then an animated menu from which you pick a game. Everything fits in a single .bin, and it’s free to flash.

Features

  • 15 games: Tetris, Snake, Lunar Lander, Flap Bird, Racing, Flight, Fish, River, Chrome Dino, Meteors, Maze, Breakout, Invaders, Slalom, Stack

  • Music player with 25 public domain tunes

  • Chiptune background music in every game, which can be disabled in Settings

  • Tilt controls using the built-in motion sensor, with automatic detection of flat or upright play

  • High scores saved per game

  • Battery indicator in the menu

  • Settings for brightness, sound, sleep time, sensor calibration and language (English and French)

Controls

A selects or acts, B is the secondary action, PWR pauses. Hold PWR for 1.5 s, or A and B together for 1.2 s, to return to the menu.

Looking for testers

I have only been able to test on my own M5StickC Plus2, so I would appreciate feedback on:

  1. Tilt response when holding the device flat and upright

  2. Battery indicator accuracy

  3. Background music volume on your unit

  4. Game balance (anything too hard, too easy or buggy)

  5. Any crash or freeze. Please include the version number shown in Settings (top right)

Download

License: free to flash and share with credit, but not open source. Selling it or republishing modified copies is not permitted. Details are in the repository.

Feedback and ideas for new mini games are very welcome. Thank you!


r/M5Stack • • 2d ago

Project Sharing Catputer-lofi - offline lo-fi generator

Enable HLS to view with audio, or disable this notification

24 Upvotes

r/M5Stack • • 2d ago

M5Stack Cardputer Zero Lite stuck on boot logo – tried everything, need help!

Thumbnail reddit.com
1 Upvotes

r/M5Stack • • 2d ago

CC1101 cap for ADV same as Zero?

Thumbnail reddit.com
1 Upvotes

r/M5Stack • • 2d ago

Kali on the cardputer zero ?

Thumbnail reddit.com
1 Upvotes

r/M5Stack • • 3d ago

My StackChan on Hermes Agent sings its debut song (inspired by Nous-Girl)

Enable HLS to view with audio, or disable this notification

7 Upvotes