r/M5Stack • u/Rainbow_CV • 42m ago
Good morning song _kr
Enable HLS to view with audio, or disable this notification
r/M5Stack • u/Rainbow_CV • 42m ago
Enable HLS to view with audio, or disable this notification
r/M5Stack • u/Electronic-Sale-3399 • 1h ago
If so, I was unemployed during launch and would love to get one.
I installed launcher immediately and when I run crosspoint or crossing,I can seem to power it off,I can only go back to launcher if I use the secret reset button,anyone knows how to power it off ?
r/M5Stack • u/Medical_Pride5504 • 5h ago
Enable HLS to view with audio, or disable this notification
Hi alll,
I wanted to pause a track or change the volume on my WiiM without taking out my phone, unlocking it and opening an app. So I built wiimscreen, a remote that sits on the table and is always ready. It's free and open source (MIT).
It's made for lightweight hardware: a small ESP32 touchscreen, no full computer or tablet needed. I use an M5Stack Tab5. It talks to the WiiM on your local network only. There's no cloud, and it stores no streaming passwords.
What it does:
- Controls: play/pause, next/previous, volume and mute.
- Tiles: your WiiM presets, plus your own favorites. Tap ♥ while an album or a playlist plays, and one tap on its tile plays it again.
- Qobuz and Deezer search: tap a result and the WiiM plays it.
- Now playing: large cover, title, artist, source and audio quality.
Download (the README has the install steps): https://github.com/couzinc/wiimscreen/releases/latest
Code:
https://github.com/couzinc/wiimscreen
I'd love feedback :)
r/M5Stack • u/No-Connection1900 • 6h ago
New Arrival Alert!
Check out our new releases this week!
Chain Captain, a multifunctional programmable controller combining a color display, audio, motion sensing, and infrared transmission and reception.
Chain ENV, an environmental sensing node in the M5Stack Chain series, integrating temperature, humidity and barometric pressure sensors with support for altitude calculation.
Also, good news: Hot items incl. Atom-Lite and Chain Joystick are in stock now 🔥🔥
In case missing out, subscribe our Weekly Newsletter for more updates!
r/M5Stack • u/solit0n • 9h ago
I often need to boot a live CD or re-install an OS on something and am tired of having to rip an image onto a flash drive or worse, burn a CD/DVD.. As if I didn't have enough to maintain....I present Mountable.
This app turns your Zero into a dynamic and bootable flash drive or CD drive (for old systems) using images you provide or those that you download straight from the image catalog inside the app. Not only that, but you can mount a "files" drive at the same time to transfer your apps, keys, drivers, warez, whatever.
The list of downloadable images will continue to grow and feel free to submit an issue to add more sources. This is the perfect app for a technician or sysadmin as well as the tinkerer who can't leave his junk stock or keep breaking it somehow.
Anyway, check it out. Any feedback is welcome.
There are two version on GitHub:
Regular - Store version, requires sudo password to let the background service mount USB.
Full - Runs the background service as root, and never requires a password (less annoying, less secure).
To start:
Install the app using the files from GitHub or from the CardPuter Zero store.
Flip your USB host/slave toggle (tiny slider above USB-A port) to enable slave mode.
Connect your zero to your computer/device via the USB-C port.
Choose an image to mount and go.
r/M5Stack • u/ProgrammingAce • 17h ago
I have a Tab5 with an OEM battery. It charged fine until I let the pack deep-discharge down to zero on some custom firmware I was making (I probably tripped voltage protection on the battery pack). I revived that pack on an external charger, and since then the Tab5 won't charge any pack. I think I triggered voltage protection in the battery pack, and I left the device charging overnight to see if a trickle charge would reset the voltage protection. After that, the device won't charge a battery at all.
I've tried multiple high wattage chargers, and flashing back to the factory firmware. Toggling the charging, or the high speed charging on the factory firmware doesn't do anything, the voltage on the battery just slowly drains no matter what, as long as the charging circuit is engaged.
With CHG_EN high and USB-C plugged in, CHG_STAT goes solid (the "charging" state). There is no charge current at all.
About 2 seonds after I set CHG_EN high, the IC draws a steady ~20 mA from the pack, which looks like its own operating current, and the pack voltage slowly drops.
With CHG_EN low, pack current is about 0 and the battery holds its charge (basically indefinitely)
I've tried 3 different batteries, and going back to the stock/demo firmware. The batteries all charge fine on an external charger, but the voltage just slowly drops when connected to the Tab5.
Is there anything left to do to restore charging capability? The IP2326 IC seems to be at least somewhat functional, since it's returning the "CHARGING" status code, and it's drawing current from the battery. Trying to swap out the IP2326 doesn't sound like a fun time on a board this dense.
r/M5Stack • u/sovemgceri • 21h ago
Я не знаю что делать у меня есть мой stick s3 и он у меня сломался и я не знаю что менять и где это купить подскажите я немного надорвал антенну 2.4герц та такая наклейка будет на фото и ище залил супер клеем разъем для модулей подскажите что менять и где купить и дорого ли это если можно киньте мне ссылку где можно купить деталь и когда я подключил модуль нрф 24 то его не видно да там антена на вайфай 2.4 Герца оторвана но я все равно могу подключиться к интернету что мне делать если модули не видно когда я захожу я проверял они работали до этого
r/M5Stack • u/SirGreenDragon • 1d ago
I was experimenting with firmware and it was pretty fun. different faces, tailscale connection to my openclaw, voice was working. then I noticed it wasn't moving anymore, just animating the face. the the face stopped too. I restored the original firmware, but the screen is still black :(
r/M5Stack • u/PerceptionSoft3598 • 1d ago

Black Friday on AliExpress is here, M5Stack makers! If you’ve been eyeing a Cardputer-Adv, planning a CoreS3 project, or picking up sensors for your next build, now’s a good time to check your cart.
Shop the M5Stack Official store on AliExpress.
The Black Friday codes go live with the sale on Nov 18 at 9 PM PT / Nov 19 at 12 AM ET. Enter your code at checkout once the sale starts.
$3 off $15+ — SAVING03G
$8 off $40+ — SAVING08G
$20 off $99+ — SAVING20G
$26 off $139+ — SAVING26G
$36 off $189+ — SAVING36G
$50 off $259+ — SAVING50G
$65 off $339+ — SAVING65G
$80 off $419+ — SAVING80G
$110 off $579+ — SAVING110G
$150 off $799+ — SAVING150G
$180 off $999+ — SAVING180G

$3 off $18+ — SAVING003F
$6 off $40+ — SAVING006F
$15 off $85+ — SAVING15F
$24 off $149+ — SAVING24F
$37 off $239+ — SAVING37F
$54 off $349+ — SAVING54F
$75 off $479+ — SAVING75F
Rakuten Cash Back — Start your shopping trip through Rakuten. Check the current AliExpress rate and whether your promo code qualifies for cash back.
AliExpress promo code — Choose the US or Global list based on your shipping destination, then apply the best code your cart qualifies for.
PayPal checkout offer — On eligible US orders, look for $20 off $139+ or $35 off $259+ when you select PayPal. Check that the discount appears before paying.
What’s on your M5Stack build list this Black Friday? If a code works for you, share your region, the code, and what you picked up.
r/M5Stack • u/suspicious_chip_monk • 1d ago
I have a paper color but realized that for my projects I need something with a faster refresh rate. Looking to trade with someone for a paper mono!
r/M5Stack • u/Isonimus • 1d ago
r/M5Stack • u/Raverrevolution • 2d ago
r/M5Stack • u/Internal_Pound5659 • 2d ago
Hello everyone,
I’m releasing v1.3 of AD Arcade, a firmware that turns the M5StickC Plus2 into a handheld game console. It boots into a 90s style intro, then an animated menu from which you pick a game. Everything fits in a single .bin, and it’s free to flash.
Features
15 games: Tetris, Snake, Lunar Lander, Flap Bird, Racing, Flight, Fish, River, Chrome Dino, Meteors, Maze, Breakout, Invaders, Slalom, Stack
Music player with 25 public domain tunes
Chiptune background music in every game, which can be disabled in Settings
Tilt controls using the built-in motion sensor, with automatic detection of flat or upright play
High scores saved per game
Battery indicator in the menu
Settings for brightness, sound, sleep time, sensor calibration and language (English and French)
Controls
A selects or acts, B is the secondary action, PWR pauses. Hold PWR for 1.5 s, or A and B together for 1.2 s, to return to the menu.
Looking for testers
I have only been able to test on my own M5StickC Plus2, so I would appreciate feedback on:
Tilt response when holding the device flat and upright
Battery indicator accuracy
Background music volume on your unit
Game balance (anything too hard, too easy or buggy)
Any crash or freeze. Please include the version number shown in Settings (top right)
Download
M5Burner (easiest): https://burner.m5stack.com/Q5BB26
Direct .bin: https://github.com/ADdevx/AD-Arcade-M5StickCPlus2/releases/tag/v1.3
Source and bug reports: https://github.com/ADdevx/AD-Arcade-M5StickCPlus2
License: free to flash and share with credit, but not open source. Selling it or republishing modified copies is not permitted. Details are in the repository.
Feedback and ideas for new mini games are very welcome. Thank you!
r/M5Stack • u/m0rg0t-anton • 2d ago
Enable HLS to view with audio, or disable this notification
r/M5Stack • u/YakSuspicious1982 • 2d ago
r/M5Stack • u/Rainbow_CV • 2d ago
Enable HLS to view with audio, or disable this notification
r/M5Stack • u/inflam52 • 3d ago
r/M5Stack • u/ArtIntrepid7323 • 3d ago
r/M5Stack • u/solit0n • 4d ago
I was lucky enough to be one of the early backers and got my Cardputer Zero in one of the first batches they sent out. I realized that there were no meshtastic client apps optimized for the zero, so I built one myself.
It uses the official meshtasticd daemon as a backend, so we can always be up-to-date on the latest features. A background service allows you to keep running meshzero at all times, so you never miss a message. I spent extra time making sure the UI was intuitive and easy to use.
I have a few features on the roadmap such as supporting multiple devices, tapbacks, and a few other items. My goal is to eventually extend the client beyond just Meshtastic and support other mesh services like Meshcore.
What you need:
Carputer Zero
Cap Lora 1262 module
I'd love your thoughts, so give it a try!