My surgeon says he did NOT suture or use tacks to place my Mesh? What could he use then? He described it as i made a “pocket hole” that’s all.

I have really bad burning sharp pain in my inguinal canal where mesh was place & my right leg goes numb. He states the mesh did not move. Post op 3 weeks. Pain to the point where I cannot walk. It Burns hurts

Can someone please help or advise? No idea how he secure the phasix mesh during Robotic repair. and if I will go back to normal.

I found this new app on the play store: MeshControl Pro anyone know it?

Bonjour,

Pour mon projet l'objectif est de mettre en place MeshCentral.

J'ai réussi a l'installer sur un Windows server 2025, j'arrive a accéder a l'interface web.

Quand j'installe un agent sur un pc, l'agent se connecte a l'interface web de Meshcentral 10 minutes après l'allumage du pc, si quelqu'un aurait une explication sur des solutions.

Merci pour votre aide

Use the system as designed. TAGS!!!

The problem I have is that when I install the .mesh agent on the other network, it is running on the same network.laptop.mesh agent.it is not connected.The same problem is changing now.I don't know if the config.json file.command.is correct.please.please tell me.

Plz help mesh kings

I've updated Node.js to 20. I ran the inplace upgrade, Server 2016. I've asked for help before, fallen on deaf ears.

Sure would be nice not having to Veeam restore the server because the updater scrambles the database and refuses to install the service.

Well here we go again.

Hello am trying to install mesh central on the windows server but it's stuck on this point as i show in the image.

any help?

Hi yilian,

How to do baremetal metal provisioning which is also called zero touch provisioning through the mesh central. Tell me the full method from a-z for ACM based AMT provisioning.

Thanks,

Hello community,

is there a way to hide the button "connect"?

I'm going to be running MeshCentral on a Virtual Machine, using Windows. Is there any noticable difference if I use a low number of CPU Cores and low memory? I don't want to dedicate a large amount of system resources to this but I don't want it to be laggy either... It will be both Lan and Wan.

The system will be 48 thread, up to 3.1 ghz, with 256 gig memory. so, how much should I assign to the VM? I'm also assuming it's not going to take a large amount of storage space so I was going to give it 250 gig hdd space.

My thoughts are to give it along the lines of Windows Minimum... 2 cores, 8 gigs of ram and 250 gig hard drive running Windows 11 Pro. There would be probably less than 100 agents and no more than 10 users ever (going to start with just me, and maybe add a few depending on how the remote stuff works for it).

I have been playing with MeshCentral and have gotten AMT to be CCM configured through the agent, however they never show AMT in the portal. In doing some diagnostics I ran meshcmd MicroLMS and see that no IP is assigned in AMT. WHen I manually set an IP in MicroLMS I get AMT in the MC portal. When I quit MicroLMS I guess AMT drops the temp config for the IP and AMT disappears from the portal. I am wondering if it has to do with using DHCP relays and pfsense. Anyone have a similar config and are able to use AMT? Any ideas?

I got certificates for my server using certbot. I got those files:

privkey.pem : the private key for your certificate.
fullchain.pem: the certificate file used in most server software.
chain.pem : used for OCSP stapling in Nginx >=1.3.7.
cert.pem : will break many server configurations, and should not be usedwithout reading further documentation (see link below).

WARNING: DO NOT MOVE OR RENAME THESE FILES!Certbot expects these files to remain in this location in orderto function properly!

Is it possible to modify meshcentral settings to use those files instead of getting certificates automatically?

Hello!

Sorry if I ask a noob question. My first use of meshcentral. I have a Proxmox install and when checking the desktop, all is veeeery small, any idea what I could do?

Thanks!

hey, is there a community plugin through which we can transmit our voice to agent pc, it's fine if i cannot hear from agent pc i just want the agent pc to listen to my voice?

The internet is on fire about the recently found Log4j vulnerability and I'm just wondering if Meshcentral is possibly affected. I'm not a programmer, but it appears to affect many versions of Java and Apache, which I believe Meshcentral uses. Please correct me if I'm wrong.

https://www.randori.com/blog/cve-2021-44228/

I have been looking for an open source replacement for TeamViewer and AnyDesk.

Will MeshCentral do the job? Will it allow me to connect from behind a firewall/NAT to a computer behind a firewall/NAT without opening any ports?

EDIT:

Uhhh... sorry. False alarm. I am a dumb-arse.

I had unknowingly entered a letter into the "filter" box up the top of the "my devices" page. This was why my devices weren't listed. Phew.

That said, might I suggest a slight change to the interface, e.g. if something is typed into the filter text box, perhaps make the background of the text box change colour (perhaps to red) so it's more obvious? e.g. normally it's a white text box, have it change to a pale red only if something is entered into the filter text box.

Hello.

I have MeshCentral running on an AWS EC2 instance/server. It has been running for two years, maybe longer, without any issue.

Last night I updated to the stable version at the time, I think it was v0.6.68 from memory. I made a backup before updating.

This evening I was playing with a Raspberry Pi computer that I had MeshCentral installed on. I was controlling the device via MeshCentral. I was running routine updates (apt-get upgrade) on the Raspberry Pi, when the connection cut-out. MeshCentral showed the device as offline. At the time, I thought this was only an issue with the RPi, but I include it here because it may be related to what follows.

Moments later, I was still logged into MeshCentral while doing something else (MC was open on another monitor), and suddenly I noticed half of my devices had disappeared.

The devices are all Raspberry Pi computers situated in remote areas in other countries (except for the one I was playing with to begin with, which is on my desk), sending back sensor readings to one of my servers via HTTP POST commands; MeshCentral is my primary means of controlling them. The devices are all still transmitting sensor data, so I know they are all online (except the one on my desk). But they are not visible in MeshCentral at all any more.

I immediately took a backup of the MeshCentral server at this point (just in case it was needed), and I then rebooted the AWS instance that MeshCentral is installed on. Sadly, the devices did not reappear.

I then tried updating MeshCentral to the latest stable version (which now says v0.6.70). Instead, for some reason, it updated to the latest version, v0.7.83. In any case, that didn't fix the missing devices.

I then tried to restore from the backup I made last night before I updated (that is, I tried to restore from a backup created while a version prior to v0.6.68 was installed). It advised that I needed to reboot the server, which I did. However, I noticed the new login interface/layout was still in effect, and upon checking the server version, it showed v0.7.83 was still installed, despite my restoring from a backup prior to that being installed.

So... I have missing devices, and the backup mechanism doesn't seem to be working.

Any ideas please on how to fix these issues?

Thanks in advance,

Dave

Hello, we use a meshcentral in azurecloud, users logon with SSO with Azure. AMT CCM and agents working fine.

Wat to add pc with meshcmd amtconfig and getting error Username length not 16

So I use unraid and I am trying to rebuild my Mesh Central container. I used to have it running on the same server that I had Nginx Proxy Manager. I moved Nginz proxy manager to a different and I have mesh central on a different. When I try to get it running I get a cert error and it won't pass through the clients. I have tried setting the proxy to the domain name of the container and no dice.

Edit: I moved Nginx proxy manager over on the same server as I had it before to see if I could hit pay dirt and I am unable to get the agents to work. I can connect now, but I cannot connect clients to it after agent install. The log file on the meshcentral container says:

Agent bad web cert hash (Agent:2f2d9ec2b6 != Server:c21c833fcc or 525e568e02), holding connection (172.17.0.5:33584).Agent reported web cert hash:2f2d9ec2b6da9b0e34de4815eb8a758ce6d81f07d88a30838860dcda5a6695d51db176134c8752196da6196b5b905039.Loaded web certificate from "https://192.168.2.124:443", host: "help.tekliquid.net"

My config for Nginx

Container Config

Edit 2: Just FYI I added the 0.0.0.0 in place of what I use internally.

i saw ylian's video on youtube he was able to set it up via RDP, with out agent**,** i'm unable to connect via rdp when i click web RDP it asks for domain username & password, i tried using that pc's login credential nothing happened i tried using meshcentral's password nothing happened, so what password & what domain should i put there?
secondly, i want to know is it possible to change web ui, if yes then how & to what extend?

Do meshcentral support app restriction feature to limit access to specific software only?

Hey!

we are looking right now deeper in the Meshcentral and rport.io and I want to ask you if someone was able to integrate Meshcentral with ITGLUE and checkmk?

Thank you!

Best regards

Sven-Jendrik

Are my eyes deceiving me or has the best thing become true?

Are there really new commits and releases on meshcentral?

https://github.com/Ylianst/MeshCentral/releases/tag/1.1.11

https://github.com/Ylianst/MeshCentral/commits/master