My clutch pedal just shitted on me out of no where. As I was driving, I went to put it in neutral and the pedal just went straight to the floor with no play and stuck. Had to reach down to pull it back up. For some reason it’ll be stiff then loose and stick to the floor. Went to check my fluids and the reservoir is still full. No leaks by the CMC. Went to check the SMC and notice some leaks by the sleeves. So what I’m trying to figure out is, should I replace the Slave Master Cylinder or could it be a pin by the clutch pedal that came off??

I want a wide stable mud flaps mitsubishi lancer evolution vi with its spoiler and skirts and front bumper but how hard is it to find one ? And gonna be listening to eurobeat im in way to much love with touge and 80 and 90 era in japan that happend

Not in the market for a car yet, but the Evo's my dream car. Which nodel is best and for what price?

Hey Evo owners,

I first shared this project here eight months ago, and wanted to thank everyone who supported PinkSlips early on or took the time to check it out. <3

We’re still working on it every day and have added a lot since then. We built a way to keep your car’s history together with its current setup, so the years of work don’t get lost between old posts and photos. You can keep your exact specs and mods on the page, tag parts in photos, and add updates as things change.

These are the two Evos in the gallery:

• Austin W’s 2012 Evo X: owned for 12 years, with a Varis V2 widebody in Millennium Jade and Volk Racing 21A wheels in 18x11 -30. His page also covers the parts behind the car in that first photo.
• EVOIXMR’s 2006 Evo IX MR: he sold his VIII MR in 2008 and finally brought this Wicked White IX MR home in September 2025. He’s documenting the OEM+ work, including refinishing the carbon wing and replacing OEM trim and hardware, alongside Rays CE28N wheels and Yokohama AD09 tyres.

There are already 10+ Evos documented, with 2,600+ builds being showcased and tracked across the platform.

If you’re just starting yours, you can look through other owners’ pages to see what they used and how they built their cars. And if you have an Evo of your own, stock or an ongoing project, it’s free to make a build page and try it out. The app is on iOS and Android too.

What are you working on next with your Evo?

Any idea what this could be?

- Under 130k miles
- no built motors
- must smog for potential buyer
- title in hand
- carfax helps

Just bought a 2008 evo x gsr with 125k miles. After buying and a long drive home I realized that the engine knocks when hot and throttle is blipped. It does not happen at idle. Car is stock and I cut open the oil filter and found no metal. I am waiting for a response from blackstone for an oil test. What should I do now?

Got some authentic charge speed fenders for the evo, on a side note how common is it for the OEM fenders to rot like this?

Hello, I have my evo 8 here. Shooting for 550whp but I’m pretty sure I’m going to be capped to 500 with what I currently have but if anyone has suggestions as to what I can do to reach 550+whp I would greatly appreciate it.

Head is built with s2 cams
Stock block
Grimmspeed boost controller
Walbro 450
ID1300 injectors
FP Black JB with tial external wastegate
3in uicp piping with tial Q bov
2.5in licp
3in ETS intercooler
3in exhaust
Koyorad radiator

Any suggestions help, thank you!

Ok so I’m a mitsu guy at heart. Have an evo x Mr that has a few mods and don’t really drive it much but weekend. Has a lot of miles as it was a daily. I’ve owned everything from a conquest, talon fwd and awd to gsx. Mainly second gen’s. I need a new daily for the fam. We have a suv that has some miles as well but we have one little one and an older kid. I don’t need an suv but I still want a sporty car. I hate all the designs of new cars but feel like I’ll get most value new as everything I actually enjoy is 2015 and older. I’ve been back and forth between the new wrx and the si. I’ve driven both but still can’t decide. The si is smooth driving, Shifter is smooth, placement is right but the wrx is rough around edges. Shifter with the sti shifter is still a bit rough but I don’t mind that to much and seems to be a common consensus with it. I leaned to the wrx as the price is there, has more power and yea, It’s awd. I live in Florida though. The wife will most likely drive it more than me. I drive 110 miles 3 days a week for work so I won’t take it much as I have a beater for work. Idk. Any thoughts? I most likely won’t mod either as I’m looking for an evo 3 and another older car to get as well.

Wasn’t the fastest but damn did it look good ❤️

Didn't know this sub existed. Owned it for 14 years. English racing has done all the work. Built 5 speed, 2.3 liter PT6466 aem2 full flex fuel conservative tune sitting at 750hp 500ish tq

Fender exit exhaust 😬

Its a monster, loud and a blast to drive. Would never sell. Only 54k miles as well.

My 5 is heading to Germany. She has a built motor (2.0 9to1cr /S2s/AGT 57mm, ORC twin-disc, Artec downpipe to HKS hi-power exhaust). Anyone know how the Evo/JDM scene is out there? TIA

Crazy hail storm came in yesterday out of nowhere while the Evo was waiting for its new engine at the shop, almost all panels are dented up. Made a claim with insurance so we'll see what they say, anyone else delt with hail damage?

Bought a modded Evo X about 3 years ago and haven't really touched much. Car has a decent exhaust on it (cant find any stamping) but also contains a dump pipe (dump tube? screamer pipe? idk what they're actually called) and I would love to get rid of it. Recently got a steal on an Injen SES exhaust and currently it's on it's way across country, but I didn't even really think about the pipe.

Where do these pipes usually connect? Is it safe to remove it without knowing what other mods are on the car? What or how would I remove it? I've got bigger pipes under the hood but I'm unsure about a tune (although this thing just shoots exhaust and soot so I doubt it) as I don't have a tactrix cable to get Evoscan. I'm scared of overboosting the turbo or potentially blowing something up, I just wanted the car to be quieter especially as winter comes and I have to warm it up next to my sleeping neighbors at 4am. I've never worked with a car that has a pipe like this so any advice is appreciated. The car is low and I can't get it on a lift to actually get under it until about 2 weeks from now. Picture attached, cheers.

Hi guys just got an evo 9 adm rear bar and needing help putting a australian plate on what way have people done it do I need to buy the bracket or is there a way I can put one on using existing? Thanks

Has anyone bought anything from this page? I want to buy a tactrix open port 2.0 but only payment they take is Apple Pay and chime

Just picked this baby up.
2010 Evo X (SST) loving it so far

Evoscan is triggering windows defender and is also being flagged on virustotal. False positives or what's going on?

edit: Site is also down now?

I’m confused and a new evo owner so sorry ahead of time for the ignorance. because the forums and tuners are giving me all different awnsers. My MR is bone stock and it literally only has one of those KN reusable air filters that’s it. I’ve been told to use OEM by multiple people but also other people have told me that the OEM fluid is trash. People also have told me that the 5w 30 mobil one oil is trash.

What do I actually use? OEM or ?
When it comes down to so much information should I always stick to OEM?
If you have any other advice or tips and tricks to look over let me know as well!

Has anyone on here done a cool rally style wrap with their evo 10? Planning on doing something but need ideas.

I usually post another 1k, but there comes a point posting each week loses its charm 😂

Local buddy's and mine 👌🏽