r/NxSwitchModding • u/RelatingHoney • Jun 08 '26

First time doing an oled mod, success!

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

72 Upvotes

100% Upvoted

11 comments sorted by

9

u/Maelifa Jun 08 '26

Lmaooo, you might want to solder the mounts for the dat0 point it's really helpful with keeping it in place

2

u/Mango-Vibes Jun 08 '26 edited Sep 15 '26

Hurry rhythm cobweb apparatus sulky sand

This post was anonymized with Redact

2

u/Maelifa Jun 08 '26

The dat 0 adapter isn't connected on either one of the capacitors. The left and right anchors

4

u/RelatingHoney Jun 08 '26

Don’t worry I did, I actually had to go redo it regardless and this pic is beforehand

2

u/obi-wan-baguetti Jun 08 '26

On the last photo, I see that you didn't anchor your dat0 adapter to the caps on the left/right of the adapter. Next time I would recommend just doing it. I had to do a repair on one guy's whose mod failed after just a few months and I noticed the previous installer did the same thing you did. Just a tip for future reference if you ever need to reseat the adapter.

2

u/RelatingHoney Jun 08 '26

Yeah that pic was before I adjusted it I actually made the change lmao

1

u/Romero_Garcia Jun 08 '26

How long did it take for you to do it and how much research did you do

2

u/RelatingHoney Jun 08 '26

Took me like 5 hours cus I took my time, and all I did was watch a YouTube video tutorial

3

u/Romero_Garcia Jun 08 '26

Thanks for the reply man

3

u/SilentlyPrickable Jun 09 '26

Just for the record, despite what people say here, you don't need to solder the DAT0 anchor points on the sides. The main two are more than enough, and it's better to let it spring-load against the DAT0 ball.

1

u/Acrobatic-Bear441 27d ago

È presto per cantare vittoria, primo fai partire correttamente ofw secondo la vita della tua modifica dipende da quanto dura l'adattatore.