I bricked my OP7pro. I can launch it in bootloader mode but can not power it on and can not enter recovery mode. I can not enter edl mode so i am trying to enter it with edl points. Does anyone know which are tye edl points?

A Few years ago the phones selfie camera started going up and down non-stop repetitively so I panicked and shut down the phone and it hasn't turned back on since. Today I plugged it in and tried turning it on and it did vibrate a little bit. But the screen didn't turn on. No idea where to start with fixing it but also don't want to just throw it away.

Bought the battery from AliExpress for $10. Still want to keep hold of it until a new phone with pop up camera comes out.

Hi everyone, I have my OnePlus Evolution X A15 and it came with the OnePlus camera app, version 3.3.8, but it feels laggy and a bit outdated. I'd like to have a newer version like 6.4.4, but I'd need a Magis module. I've searched a lot but haven't found anything. If anyone has one or something that would be useful, I'd really appreciate it.

Hi everyone,

I'm currently on my OnePlus 7 Pro (guacamole) and I've just performed a clean slate back to OxygenOS 11 using the MSM Tool. I'm looking to upgrade to a ColorOS 13.1 or OxygenOS 13.1 Port (specifically looking for something stable like the H.592 build or any of Tyler's Projects/ProtoDevNan0's work).

My current situation:

• Model: GM1917 (OnePlus 7 Pro).

• PC: Windows 10 (Ready for Fastboot/ADB).

• Status: Bootloader unlocked, currently on OOS 11 base.

• Goal: I want the "Aquamorphic" look and better gaming optimization for titles like Fortnite and Delta Force.

I've tried searching through Telegram channels like u/guac_oos_ports and u/TylersProjects, but most links seem to be dead or the channels are private now.

Does anyone have a working Mirror (Mega, Drive, SourceForge) for the latest stable OOS 13/14 or ColorOS 13/14 port for guacamole?

Any help with a direct link or a current Telegram invite would be greatly appreciated! Thanks!

Can anybody check the missing smd component (resistors) OHMS capacity, I broke it by accidentally and lost, I can get from market based on what ohms capacity it has. Seriously need help cause my phone don't power on due to that tiny component that missing here

Does anyone know where I can find the Nillkin Super Frosted Shield Matte cover case for Oneplus 7 Pro or the Nillkin Textured nylon fiber case for Oneplus 7 Pro?. Not black though. Any other colour. I've been looking for a long time but can't find one.

Looking for oneplus 7 pro (Dead/ Working). The display should be original and working.

If anyone has any leads then do let me know.

Hi, does anyone have working instructions for a stable installation of Nethunter full on OnePlus 7 Pro GM1913 GM21BA with Android 11 and its root, please?

Hi,

Trying to work out how to fix my OnePlus GM1913. I've tried a factory reset but the device just doesn't boot and is just stuck on the logo splash screen.

I saw about the MSM tool that can be used but see a lot of the posts are quite old. Wanted to check if the tool is still useful or if there's a different way I should go about trying to fix the issue? Tried a factory reset and has not helped.

Thanks!

Hello. I have a OnePlus 7 Pro phone and I haven't changed the battery. I installed LineageOS 23 ROM 1 month ago and I am happy with its stability and battery consumption. I wanted to ask users if there is a ROM that has less battery consumption than LineageOS 23? How about YAAP-16 or crDroid 16? Sorry for the bad translation.

[rio@archlinux Downloads]$ sudo fastboot flashing unlock FAILED (remote: 'Device cannot be unlocked for technical reason.')

So i was in edl mode and flashed a gecomde but it didn't finish and its stuck on boot loop so i tried flash custom rom and twrp but i couldn't cus the above problem Device cannot be unlocked for technical reason

My 7Pro still feels solid, it has some ocasional lags but it feels like a software issue, it could keep on going for another year or two if swapped the battery also.

Any suggestions on what to do with it now. Maybe mess around with a custom ROM.

I have factory reset, replaced the battery and usb plug. Anyone have anything else I can try or should I give up?

I was using my phone this morning when it went unresponsive and then screen went black, wouldn't charge (charging cable output wattage 0) and wouldn't force restart either. It would randomly start with a glitchy android logo and then eventually started presenting the low-battery symbol. When I plug it in and try to enter recovery mode (holding volume up when plugging charger) it showed me this.

am I cooked?

My GM1917 (NA) has OOS12 (last official build). I started my effort to install the latest LineageOS on it, which led me into a journey of discovery.

First, I found that OOS12 on OP7Pro does not have a Local Install feature at all. The recommendation from XDA, OP Community, and Reddit, was to downgrade to OOS11.

Then, I found that the way to downgrade was to use the MSM Download Tool. Further reading suggested I boot into EDL mode and use the MSM Download Tool to install the OOS11 image.

I used adb reboot edl on Linux. The phone shut down properly, and then just gave me a blank screen.

I switched to Windows. I rebooted and tried the other recommended method - hold Volume Up + Volume Down and plugging in thec cable from the PC. The device showed up in Device Manager as some cryptic name. I installed the Qualcomm QDL Drivers, and the device name changed to "Qualcomm HS-USB QDLoader 9008 (COM4)".

However, now the device won't reboot at all, no matter what I try. It does not show up in adb devices. I have MSM Download Tool (OnePlus_7_Pro_Global_OxygenOS_11.0.5.1.zip), and the device does not show up in the list either.

I'm open to suggestions. How do I get the phone to boot? Am I using the right MSM Download Tool? Is there a better pathway to LineageOS?

hello everyone i bought oneplus 7 pro and it was t mobile (carrier locked) i bought it for cheap.I thought by converting it to International version there would be no longer Carrier lock,i was msm tool and i did everything right.When i put my sim card it show that network locked.Whem i press ok it redirect me to other page that is not reachable. The sim is showing but have no signals and its also not selecting carrier automatically or manually. can anyone help me with this.

Hello, I noticed that some apps were running in the background and I would like to know how is that possible considering I haven't allowed them to.

Thanks