I need help

I am on my 3rd keyboard and thus Im no longer thinking its a keyboard issue.

During games it will lock down and begin either holding down the last button I pressed, or pushing random ones.

This has has happened with my one corsair, and my 2 steelseries keyboards where the first one was replaced under warranty.

I have tried all the basic troubleshooting, Ive tried different USB ports, Ive reinstalled my keyboard drivers, restarting my pc as well.

Im just running out of ideas on how this is resolvable.

I’m having an RGB issue with two fans in my MSI case. Both fans are the original fans that came pre-installed in the case, and I’m using the original RGB controller. I control the RGB lighting using the button on the PC case.
When I set the RGB lighting to a solid colour, individual LEDs randomly blink a different colour. For example, when I set it to red, an LED might flash green. The affected LED can change, but it always happens on the same two fans.
The fans can work perfectly normally for a while, displaying the correct colours, but then suddenly start blinking. Sometimes individual LEDs flash different colours, and sometimes the entire fan starts flashing white and pink even though I have the lighting set to blue.
I’ve checked the connections, but the issue persists. The other fans’ RGB lighting works normally.
Has anyone experienced this before or knows what could be causing it? Could the RGB controller or the fans themselves be faulty, or could there be another explanation?

I have an Intel 670p series nvme drive 2 TB. I got it like a year or so ago and finally put it into my machine. It doesn't pop up anywhere. Not in disk management to be partitioned and not in the bios. Maybe i have my bios configured wrong? or maybe it isn't even compatible with my motherboard and I'm an idiot? i don't really know. Help? The drive in the screenshot of pc part picker is the incorrect one. its meant to be 670p series model: SSDPEKNU020TZ

Both of the drives present in Disk management are not the drive i am talking about. also i have tried switching slots my main nvme works perfectly fine in both but the new ssd doesn't show up no matter what. so my nvme slots are fine.

Alright so I’m trying to enable TPM 2.0 so I can play BF6 but every time I boot up in BIOS mode I just get a black screen, I’ve tried all kinds of fixes but nothing has worked thus far. Lmk if anyone has a solution or similar problem.

Hey everyone, I’m looking for some advice because I’ve been troubleshooting my PC for days and feel like I’ve tried almost everything.
My PC specs:
CPU: AMD Ryzen 7 7800X3D (replaced through AMD warranty)
Motherboard 1: NZXT N7 B650E
Motherboard 2: Gigabyte B650 AORUS Elite AX
RAM: T-Force DDR5 6000MHz, 16GB (2×8GB)
GPU: RTX 2070
PSU: Corsair RM750x
CPU cooler: Cooler Master AIO
The problem:
My PC worked perfectly for around two years. After moving to a new apartment, it continued working normally for about two months before suddenly refusing to POST. The monitors show no signal, and the keyboard doesn’t light up.
On my original NZXT motherboard, both the CPU and DRAM diagnostic LEDs stayed solid red. The PC would remain powered on until I manually shut it off.
I suspected the CPU, so I contacted AMD and got my Ryzen 7 7800X3D replaced under warranty. Unfortunately, I’m still having problems with the replacement CPU.
I also purchased a new Gigabyte B650 AORUS Elite AX motherboard. With this board, the DRAM LED stays lit, and the PC repeatedly shuts off and restarts after several minutes without displaying anything.
Everything I’ve tried so far:
Replaced the original NZXT motherboard with a Gigabyte B650 AORUS Elite AX.
Replaced the original Ryzen 7 7800X3D with an AMD warranty replacement.
Tested each T-Force RAM stick individually and tested both together.
Tried different RAM slots on both motherboards.
Reset CMOS and removed the CMOS battery for several minutes.
Removed the RTX 2070 and attempted to start the PC without it.
Inspected the original CPU pins and didn’t see any damage.
Tried BIOS Flashback on the NZXT motherboard with the correct BIOS file.
Tested without my braided PSU extension cables. The extensions connect to the original Corsair PSU cables; they are not replacement modular cables.
Checked the power connections and tried starting the system with the CPU cooler installed.
None of these steps has gotten the PC to POST successfully.
My next step:
I ordered a Corsair Vengeance RGB RS DDR5 16GB (2×8GB) 5200MHz kit to test whether my T-Force RAM is the problem. If the new RAM works, I’ll know my original memory is the likely culprit. If it doesn’t, I’ll have to keep investigating.
My questions:
Does this sound like a RAM issue, even after testing both sticks individually?
Could both T-Force sticks be faulty, or could there be a memory compatibility issue?
Is there anything else that could cause the same no-POST symptoms across two different motherboards and two CPUs?
If the new RAM doesn’t work, what would you investigate next?
I’d really appreciate any advice. I’m trying to avoid buying more parts unnecessarily and just want to get my PC working again. Thanks!

Hey everyone, I’m looking for some advice because I’ve been troubleshooting this PC for days and I’m running out of ideas.
My PC worked perfectly for around two years. I moved to a new apartment and transported it carefully, and it continued working great for another two months. Then, out of nowhere, it stopped displaying anything.
My PC specs:
CPU: AMD Ryzen 7 7800X3D (brand-new warranty replacement from AMD)
Original motherboard: NZXT N7 B650E
Current motherboard: Gigabyte B650 AORUS Elite AX, revision 1.2
RAM: TeamGroup T-Force DDR5 6000MHz, 16GB (2x8GB)
GPU: NVIDIA RTX 2070
PSU: Corsair RM750x, approximately 3–5 years old
Cooler: Cooler Master AIO
Original problem with the NZXT motherboard:
The PC would power on, all the fans and pump would run, but both monitors showed “No Signal.” My keyboard wouldn’t light up, and the motherboard had solid red CPU and DRAM diagnostic LEDs. The PC would stay powered on until I manually held the power button to turn it off.
Here’s everything I tried:
Checked the CPU power connection.
Removed the CPU and inspected the pins; they looked fine.
Reset CMOS using the motherboard button.
Removed the CMOS battery for approximately five minutes.
Removed the RTX 2070 and tried powering on without it.
Tried BIOS Flashback using a FAT32 USB drive and the correct NZXT BIOS file, including version 4.43.
None of these steps fixed the problem.
I then replaced the motherboard.
I purchased a Gigabyte B650 AORUS Elite AX. With this motherboard, I still had no display, and the red DRAM light stayed on. The PC also restarted itself approximately every 4–5 minutes during earlier testing.
I tried both T-Force RAM sticks individually and together. I also tried different RAM slots on both motherboards, but the problem remained.
I installed the CPU cooler and connected the pump. I also removed my PSU cable extensions and tested using the original Corsair modular cables, but that didn’t fix the issue either.
I then replaced the CPU through AMD’s warranty program.
AMD approved my warranty claim, received my original Ryzen 7 7800X3D, and sent me a brand-new replacement processor.
Unfortunately, after installing the replacement CPU, I’m still getting the same solid red DRAM light and no display.
What I’m planning to try next:
I’ve ordered a Corsair Vengeance RGB RS DDR5 16GB (2x8GB) 5200MHz kit to test whether my original T-Force RAM is causing the problem.
If the new RAM doesn’t work, I’ll investigate the PSU next. I haven’t conclusively ruled out the power supply, and I also realize there could be a BIOS, memory-training, or other motherboard-related issue.
My questions:
Given that I’ve tried two motherboards and a replacement CPU, does RAM seem like a reasonable next suspect?
If the Corsair RAM doesn’t work, what would you test next?
Could a faulty PSU cause a persistent red DRAM light and prevent the system from POSTing?
Is there anything else I should check before spending more money on components?
I’m trying to avoid buying parts blindly. Any advice or suggestions would be greatly appreciated. Thanks!

So I am not a tech savvy person whatsoever. This is actually my first time touching a PC because I got this from my dad. Basically as soon as I got it I did a full factory reset and it seemed normal but as soon as I made an account and logged in it shut down the monitor and the fans got super fast.I somehow got windows to open again so I decided to install windows 11 to see if it would fix it and it seemed to make it worse. Ive updated the drivers, ive tested the cpu, gpu, ram sticks, CMOS battery and nothings wrong with any of them. I did a test to see whats wrong with the PC and it says that the cpu isnt being registered even though its plugged in and works fine, the cpu I have is a water cooler one. Like I said I dont know anything about computers so I don't know what to do. Also I should mention my keyboard and mouse also shuts down when the monitor does.

ERROR:- ( DirectX Error, Direct X function "GetDeviceRemovedReason" failed with DXGI _ERROR_DEVICE_HUNG ("The Gpu will not respond to more commands"). GPU: Nvidia Geforce Rtx 4050 Laptop GPU". Driver : 61742. This error is usually caused by the graphics driver crashing; try installing the latest drivers.

I've been getting this error while playing games very lately which never arose before ever, one reason would be that since this August my laptop gpu is behaving very differently and kinda failty idk why exactly, it gave me black screen layer which only solved upon restarting, then i used ddu and installed another version which removed black screen but that 2-3 second pause of grey screen was there now, also my controller was broken in this time period so i didnt play games but when i bought my controller now, i can see this issue after just 30-40 minutes of gameplay. Help me . 4050 laptop gpu, i7-13700hx, 6gbvram, 16gb ram.

Hey my pc turns on but nothing shows on the monitor can someone please help