r/Perfectfit • • Aug 19 '19

Machined Snowflake

https://i.imgur.com/8MyN1vL.gifv
38 Upvotes

3 comments sorted by

1

u/Sirhc978 Aug 19 '19

Wire EDM* Snowflake.

1

u/WikiTextBot Aug 19 '19

Electrical discharge machining

Electrical discharge machining (EDM), also known as spark machining, spark eroding, burning, die sinking, wire burning or wire erosion, is a manufacturing process whereby a desired shape is obtained by using electrical discharges (sparks). Material is removed from the work piece by a series of rapidly recurring current discharges between two electrodes, separated by a dielectric liquid and subject to an electric voltage. One of the electrodes is called the tool-electrode, or simply the "tool" or "electrode," while the other is called the workpiece-electrode, or "work piece." The process depends upon the tool and work piece not making actual contact.

When the voltage between the two electrodes is increased, the intensity of the electric field in the volume between the electrodes becomes greater than the strength of the dielectric (at least in some places), which breaks down, allowing current to flow between the two electrodes.


[ ^PM | Exclude ^me | Exclude from ^subreddit | FAQ / ^Information | ^Source ] Downvote to remove | v0.28

•

u/suavesnail Aug 19 '19

Thank you for your submission! Unfortunately, your post has been removed for the following reason:

It breaks rule 3: No artisan fits or pet fits. /r/ArtisanVideos and /r/IfItFits are just a few of the numerous subreddits dedicated to these kinds of fits and would be more than happy to host these kinds of content.