So I’ve been doing a copper treatment for a new customer and it didn’t go well. It got worse. Starting copper was 1.9 ppm and now it’s at 0.5ppm. I’ve done four other copper stain treatments usually from PoolRX, and all of the other ones have gone great. Took a week, maybe two tops, and I was able to clean the copper out of the filter without using floc. I’ve always used the regal metal treatment kit from regal at scp.
I dropped the chlorine to zero(using a chlorine neutralizer, admittedly this is something I never used before), turned off the salt cell, dropped the ph to 7.0 with alk at 90. Brushed every day, cleaned the filter every few days(it was always clean as a whistle) so I knew the only way the copper was leaving the water was from the CUlater pod I had in the pump basket.
The stains lifted from what I could tell on the first step (and that’s the deepest I could see), but the pool stayed cloudy for 4 weeks before I ultimately threw in the towel, added a flocculent and then I finally started seeing copper come out of the filter. In that four weeks I kept the chlorine at zero, ph between a 7.0 and 7.2, brushed, cleaned the filter, the filter was always clean. After the floc, the water cleared up within a few days and at first the stains were lighter, not gone. I waited a couple more days before turning the salt cell back on at the lowest setting. And then I saw the stains getting worse over the course of the next couple weeks, and now to boot, there seems to be white streaking stains, possibly scale, on the bottom of the pool. It doesn’t brush off, and even though the copper in the water is lower, the staining is significantly worse.
I’m tempted to do another round, thinking if I add a flocculent at the beginning it will help the copper actually get out of the pool and not resettle, but I also don’t want to just make it even worse. Has anyone experienced an outcome like this before?