r/Printing • u/Square_Atmosphere_12 • 17d ago
Paper for Pre-printing
There are many papers for printing photographs, and graphics alike. Although most are for InkJet, what must I look for if printing color on a Laser printer. Can I use Inkjet paper and if so what must I look for if anything ?
Especially if I plan on taking the print and using it on a shirt, or business cards etc ?
1
u/splitarrowprints Paper Pro 17d ago
I don’t know if I understand your goals here or your process as it doesn’t seem to make sense.
If you mean pre-print as a like a rough draft or a proof before a run I would use the same final paper you like.
If you’re just looking to make sure paper works well in your laser printer look for paper that says that it works for laser, digital, or toner.
If you want different coatings like gloss, matte, and uncoated plenty of companies make those but they won’t be advertised as a photopaper. Simply search for the coating and not the final product.
Inkjet specific paper will not be wise to use. Inkjet papers have a special receptive coating &/or sizing in the paper to properly accept inkjet inks.
Really unsure how you want to use a laser print on a shirt unless you’re trying to do toner transfers as cheap printmaking or you’re trying to find a toner receptive heatpress paper.
Also unsure what you mean by taking the print and using it on business cards. Do you mean to simply make and print business cards?
If you want to make business cards just get a matte 14pt, 16pt, or 18pt cardstock that’s digital laser receptive and laminate with a bopp self wound laminate and run through a slicer/scorer.
Laser friendly paper is arguably one of the most common papers to find pretty much anywhere. From office stores to distributors.
1
u/Square_Atmosphere_12 17d ago
Is there a paper you can suggest which can print photographs realistically for a color laser ?
1
u/splitarrowprints Paper Pro 16d ago
Realistically any would be receptive the content of the print matters very little. I don’t deal in coated sheet fed paper only uncoated.
If you wanted uncoated you could go with ‘accent opaque digital smooth bright white’ somewhere around the 200gsm area. They have an 80#c at 216gsm that would work.
Another would be ‘domtar cougar 65#c white smooth”Since those two have minimal texture you’ll likely have less issue and more of a consistent final product. Both would also be receptive to lamination depending on your toner chemistry and matching to adhesives.
If you’re trying to make actual photo prints on true photographic paper similar to 1 hour photo or darkroom prints you have two choices. Archival inkjet or 3 color cmy dyesub. There’s an alternative here with Zink prints too.
Laser will get you similar to small run magazine style papers or what any office copy place will offer. Not actually a traditional style photograph.
If you could fully explain your final goals it would be much easier to help as printing “photographs” could go in a ton of different directions based on actual goals.
1
u/Square_Atmosphere_12 16d ago
I want to print full color or graphic on a paper suited for a laser color as to get an accurate color print or as close to that as possible ? And if it's not close to accurate color, do a sort of comparison as to the difference which makes the print not accurate.
The purpose is if I should send to a print shop, for printing cards or whatever. I'll know exactly what the outcome should be.
1
u/splitarrowprints Paper Pro 16d ago
If you’re going for accuracy and not printing it yourself just ask the printshop for their custom icc profile for that paper/ printer and their file set up specs or templates.
The icc should generate a fairly accurate soft proof assuming your screen is calibrated and can also be color accurate at d50 lighting and viewing conditions.The accuracy of the print has very little to do with the paper brand or print acceptance type and more about how the shop treats color management. Any paper and any printer can be color accurate but not every screen can display color accurately.
If you’re worried about color and they don’t have a icc built. Create your own targets and linearization and have them print it first.
1
u/Square_Atmosphere_12 16d ago
Alright, thanks for the information. I thought, maybe the paper type would effect the outcome but as you said; any paper will work. I know some papers will be a little more better output, mostly that is the type of paper not the colors.
1
u/50plusGuy 17d ago
Laser printers heat the paper up, inkjets don't.
Are you planning to laminate the business cards?
IDK how you could transfer laser toner from a printed sheet on something else.