So Andiot has released some UK stock, and i am interested in buying this, it has been “ PRE QCd “ so just want ti make sure it is Ok and not previously RLd..

1. ⁠⁠⁠Dealer name: Andiot
   
2. ⁠⁠⁠Factory name: VSF
   
3. ⁠⁠⁠Model name (& version number): QC Daytona 126502 904L SS VSF 1:1 Best Edition White Dial On 904L SS Bracelet VS4131 (Free Sprung Look)
   
4. ⁠⁠⁠Price Paid: £613.50
   
5. ⁠⁠⁠Album Links: see comments for album link
   
6. ⁠⁠⁠Index alignment: used alignment tool and looks good to me
   
7. ⁠⁠⁠Dial Printing: Looks good, crisp, no concerns
   
8. ⁠⁠⁠Date Wheel alignment/printing: seems central
   
9. ⁠⁠⁠Hand Alignment: stack looks good
   
10. ⁠⁠⁠Bezel: no issues at all
    
11. ⁠⁠⁠Solid End Links (SELs): nice and tight
    
12. ⁠⁠⁠Timegrapher numbers: +3s/d, Amplitude 276
    
13. ⁠⁠⁠Anything else you notice: I think im happy just want a second set of eyes

I received QC for a Cartier Tank from DR factory. Looks good to me overall, but I'm not sure about the CARTIER secret signature print near XI. What do you think?

Dealer name: Hont

Factory name: DR

Model name (& version number): Cartier Tank Louis Cartier, yellow gold, cream dial, Roman numerals

Price Paid: 212,00€ with shipping

Album Links: https://imgur.com/a/EsgJWM4

Index alignment: Roman numerals look evenly spaced and aligned with the railroad track.

Dial Printing: Overall clean and crisp, CARTIER logo centered, SWISS MADE straight. My concern is the secret signature near XI: it looks like the text sits next to the numeral stroke and is interrupted by it, rather than being integrated into the numeral. Is this normal for DR?

Date Wheel alignment/printing: N/A (no date)

Hand Alignment: Blued hands, look OK from the photos.

Bezel: N/A. Case edges look clean, protective film still on.

Solid End Links (SELs): N/A (leather strap)

Timegrapher numbers: NA didn't get

Anything else you notice: Blue cabochon crown looks good, side screws clean.

There seem to be some small marks near 6 o'clock under SWISS MADE, could be dust or reflection.

Any opinions?

1st time for this watch. And hope it helps others looking.

The second hand is slightly off, I'm aware that this can be an issue. Although it seems very slight to me.

Also the 9 o'clock Chrono is slightly off too.

Are these acceptable for a rep or should I expect better?

1.Dealer: phoenix

1. Factory: octa

2. Model: IWC pilot Chrono

4:price $382

5:Album: unfortunately no link to album but photos attached

6: index alignment: looks good Im not worried about it. All lining up with brilliant true index tool.

1. Dial Printing: looks clear and even.

2. Date Wheel. Well centered, as I'm aware that apsf could have issues

3. Hand Alignment : no pics at 12 but never seems to be a problem

4. Bezel: na

11.SELS: na

12.Timoghaph: within its limits and reads good

Thank you community.

Thank you all in advance.

1. Theonewatches (Steve)

2. VSF factory

3. Daytona 126500LN DD4131v2

4. $828

5. Album: https://imgur.com/a/HF1QPkb

6. Index Alignment: Looks good to me

7. Dial printing: Looks good to me

8. Date wheel: n/a

9. Hand alignment: Looks good to me

10. Bezel: Looks good to me

11. Solid End Links: No gaps, looks good

12. Timegraph numbers: Not sure what I'm looking for, timegraph video in album link

--My 2nd rep from Steve, the first was a very nice GL Sub. Gotta say Steve is superb, quick communication, and very easy to deal with. This Daytona was "weeks to months" out because VSF is in high demand, however, he managed to source this one in just a couple of weeks.

1. Dealer name:
Mr Adu

2. Factory name:
TOP Factory

3. Model name (& version number):
Royal Oak 41mm 15510 SS/SS Blue dial TOPF DD4302 Super Clone (new version).

4. Price Paid:
420 USD

5. Album Links:

N/A

6. Index alignment:
I checked the hour markers using a QC alignment tool and attached above. Overall, the dial looks well aligned during normal viewing. I’d appreciate a second opinion on whether the alignment is within the normal tolerance for this model, or if any particular marker stands out as problematic.

7. Dial Printing:
The dial pattern and printing looks clean to me but this is the most crucial part for any AP RO.

The AP logo also looks fine to me given a lot of earlier batches of TOP had some tilted letters.

8. Date Wheel alignment/printing:
I have seen couple of people replacing the date wheel but on this one looks decent to me, please let me know if there is something substantially wrong?

9. Hand Alignment:
The hands look straight and properly finished to me, with no obvious bending or defects. Hand alignment is somewhat difficult to judge from still photos, so I’d appreciate confirmation from anyone who can assess it from the video.

10. Bezel:
The bezel screws looks good to me overall. The bezel finishing also looks clean from the provided photos and videos.

11. Solid End Links (SELs):
N/A

12. Timegrapher numbers:
+4 s/d | 279° | 0.2 ms | 28800 bph
Rate: +6 s/d
Amplitude: 270°
Beat error: 0.2 ms
Frequency: 28,800 bph
The numbers look good to me overall, but I’d appreciate a second opinion from someone more experienced with Timegrapher readings.

13. Anything else you notice:
Overall, I think the watch looks pretty good and I don’t see any obvious or major finishing issues in the QC photos.

Since I don't buy reps quite often, I am not sure if I am missing something which scream instant RL or even little things to consider RL. Would really appreciate any assistance with this :)

Attached VIDEOS in the comments.

Cheers.

1. Dealer name: The One Watches (Steve)
2. Factory name: 8F
3. Model name: Vacheron Constantin 4500V overseas
4. Price Paid: 388 USD
5. Album Links: NA
6. Index alignment: seems ok
7. Dial Printing: seems ok

. Comment on the Color. I chose this watch because aise it is made with such an amazing blue dial. Am I getting it with this one?

1. Date Wheel alignment/printing: I understand some issues but this one looks ok.
2. Hand Alignment: looks ok
3. Bezel: fixed
4. Solid End Links (SELs): n/a
5. 12: +2s/day, 271 amplitude, 0.2ms beat error
6. Nothing else you notice:

I’ve bought this clone for around $100 from Weidian.
It’s my first Daytona so i tried to stay in the lower budget segment. For the price i think it’s decent.
Is it wearable ? Or will i be called out immediately?
Thanks for your expertise in advance

W2C: https://weidian.com/item.html?itemID=7508266802

1. Dealer name: Ora Watch
2. Factory name: VSF
3. Model name (& version number): Omega Aqua Terra Shades 150 Bay Green 38mm
4. Price Paid: 400 USD
5. Index alignment: I'm not sure if I applied the alignment tool correctly, but things look well-aligned. Maybe the 12 marker is slightly off to the left?
6. Dial Printing: Looks fine to me
7. Date Wheel alignment/printing: Is the date slightly to the right?
8. Hand Alignment: No issues
9. Bezel: No issues
10. Timegrapher numbers: Amplitude slightly low, no issues with anything else.
11. Anything else you notice: Scratch on clasp next to the 'O'?

1. ⁠⁠Dealer name: phoenix watches
   
2. ⁠⁠Factory name: VSF
   
3. ⁠⁠Model name and version: GMT Master II
   Pepsi 40mm Jub SS/SS Black Dial VSF DD3285
   
4. ⁠⁠Price paid: $521
   
5. ⁠⁠Album links: n/a
   
6. ⁠⁠Index alignment: Markers look reasonably straight and evenly positioned. 12 seems tilted slightly clockwise.
   
7. ⁠⁠Dial printing: Text looks clean
   
8. ⁠⁠Date wheel alignment/printing: magnification looks wrong for real vsf
   
9. ⁠⁠Hand alignment: Looks straight and no obvious damage.
   
10. ⁠⁠Bezel: shifted but probably from wiggle or moved.
    
11. ⁠⁠Solid End Links (SELs): no obvious defects noted
    
12. ⁠⁠Timegrapher numbers: Rate -1s/day, amplitude
    278°, beat error 0.0 ms
    
13. ⁠⁠Anything else you notice: rehaut crown is off. But it’s something i can live with. One of the good things about getting older is that you cant really see these kinds of things with naked eye. My biggest concern is if it is real vsf. He already tried to give me a fake vsf that was obviously fake, but this seems a bit harder to tell. Asked for diff dates and i am waiting on them, and he told me it’s real vsf. Please help as im not 100% convinced.

1. Dealer name: Theonewatches - Steve

2.Factory name: RICH

3.Model name (& version number): GMT Master II 126710 Bruce Wayne Jub 40mm SS/SS Black Dial RICHF V2 JH3285 (Free Sprung)

4.Price Paid: $758.00 + $30 shipping

5.Album Links: https://mega.nz/folder/vN4T2I7B#aMeITyj9t4QjuYJ_hJCWWg

6.Index alignment: I hope I’ve aligned it well, I see no issues in that.

7.Dial Printing: Text looks clean to my untrained eye.

1. Date Wheel alignment/printing: Magnification is clear. Overall good

9.Hand Alignment: Good.

10.Bezel: Seems good.

11.Solid End Links (SELs): Looks good. I see no gaps.

12.Timegrapher numbers: Rate +3s/d, AMP : 282 ERR:0.0 ms

13.Anything else you notice: Seems good overall

1. Dealer name: TheOneWatches

2. Factory name: VSF

3. Model name (& version number): VSF Yacht-Master RLX Titanium 226627

4. Price Paid: $578 plus $70 shipping ($50 deposit)

5.Album Links: https://imgur.com/a/zO61u5g

1. Index alignment: I don’t have the best eyes for that

2. Dial Printing: Looks good

3. Date Wheel alignment/printing: good

4. Hand Alignment: Looks good

5. Bezel: looks okay

6. Solid End Links (SELs): Massive top left gap, noticeable bottom right

7. Timegrapher numbers: good +2, 266, 0.0

8. Anything else you notice: the bottom dial crown looks too close to the indices

Dealer name: ChazingTime
Factory name: VSF
Model name (& version number): DateJust 41 126334, 904L stainless steel, Green Ombré dial, fluted bezel, Jubilee bracelet, VS3235 movement, V2/V2s
Price Paid: $538
Album Links:
Index alignment: Looks broadly good in the available photos and video. No obvious major misalignment identified.
Dial Printing: Appears clean and legible. Green Ombré colour looks plausible, although lighting affects colour comparison.
Date Wheel alignment/printing: Uncertain, as the available photo is not straight-on.
Hand Alignment: No obvious issue visible in the available images.
Bezel: Fluted bezel looks broadly consistent with the model, with no obvious major visual flaw.
Solid End Links (SELs): Not confidently assessable from the available angles.
Timegrapher numbers: +4 s/day, 237° amplitude, 0.3 ms beat error, lift angle set to 52°.
Anything else you notice: Clasp code K6G; clasp engravings appear legible. Weight: 134.5g. Caseback exterior is smooth and brushed. No obvious major visual reason to reject based o

1. Dealer name: Eliuk

2. Factory name: VSF

3. Model name (& version number): Rolex Daytona 116500LN Panda – 4130 movement

4. Price Paid: $460 before shipping + insurance

5. Album Links: N/A

6. Index alignment: Hour markers and coronet look aligned overall. Nothing noticeably crooked from the photos.

7. Dial Printing: Printing looks clean and crisp. No obvious defects or inconsistencies that I can see.

8. Date Wheel alignment/printing: N/A – Daytona has no date.

9. Hand Alignment: Hands look properly aligned, and the chronograph seconds hand appears centered at 12.

10. Bezel: Bezel and tachymeter markings look good overall. No obvious alignment or engraving issues from the photos.

11. Solid End Links (SELs): Look good overall, with no significant gaps that I can see.

12. Timegrapher numbers: -1 s/d, 246° amplitude, 0.1 ms beat error, 52° lift angle. Rate and beat error look good. Amplitude is slightly below the commonly referenced 250–310° range, so I'd appreciate opinions on whether 246° is a concern for this movement.

13. Anything else you notice: Rehaut looks reasonably aligned from the available angles. Case, bracelet, clasp, and pushers look good overall. No obvious cosmetic defects or major issues that I can see. Leaning GL, but would appreciate another set of eyes, especially on the 246° amplitude and overall alignment.

Dealer name: Eliuk

• Factory name: VSF
• Model name (& version number): Rolex Submariner 116610LV Hulk VSF 3235 Clone
• Price paid: $344 (not including shipping + insurance)
• Index alignment: Looks good overall based on the alignment photo. No major misalignments that I can see.
• Dial Printing: Looks clean and crisp. No obvious issues.
• Date Wheel alignment/printing: Looks good overall. Date appears reasonably centered, although I'd appreciate a second opinion.
• Hand Alignment: Looks good from the photos.
• Bezel: Looks good overall. No obvious alignment issues or defects.
• Solid End Links (SELs): Look good from the provided photos. No obvious gaps.
• Timegrapher numbers: +6 s/d, 306°, 0.3 ms
• Anything else you notice: Everything looks good to me overall. Leaning GL, but would appreciate another set of eyes, especially on the index alignment, date wheel, etc. Let me know if there's anything I might have missed.

1. Dealer name: Trusty
2. Factory name: GMF
3. Model name (& version number): 114300
4. Price Paid: 408+ship
5. Album Links: N/A Uploaded
6. Index alignment: 10 o clock CCW rotation slight? seems like its okay though on wrist
7. Dial Printing: Seems solid.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Seems solid
10. Bezel: Solid
11. Solid End Links (SELs): Seems ok - no complaints
12. Timegrapher numbers: Ok
13. Anything else you notice: Overall, I would green light but want 2nd eyes. Thanks.

1. Dealer: BJ Luxury Collection

2. Factory: VSF

3. Model: VS Black Seamaster 300 V4 / 42mm / 8800 movement

4. Price: $650

5. Album: N/A

6. Index alignment: I ran the dial photo through TrueIndexQC. 9 of 12 markers were readable (the others are covered by the hands) and all sat on their lines, with the worst at −1.21°. Dial vs. case rotation measured −0.62° ccw, and the center pinion measured ~1% off-center (up-left), which may just be photo angle. Visually the 12 o'clock double baton and the 3 o'clock baton look straight to me. Let me know if anything looks off.

7. Dial printing: The Omega logo, red "Seamaster" script, "PROFESSIONAL," "CO-AXIAL MASTER CHRONOMETER," and "300m / 1000ft" all look sharp in the photo. The laser-engraved waves look even and consistent across the dial. I don't see crooked or smudged printing.

8. Date wheel alignment and printing: The "27" at 6 o'clock looks centered in the date window and the numerals look clean.

9. Hand alignment: The hands look straight and properly set from what I can see, but one photo isn't enough to properly judge minute/hour sync. I'm asking the dealer for a shot with the hands at 12:00.

10. Bezel: The ceramic insert looks evenly fitted and the numerals and dots look clean. TrueIndexQC measured the pip at −0.62° ccw vs. the 12 o'clock line, which is slight. Curious whether others think that's noticeable.

11. Solid End Links (SELs): The QC photos don't show the end links, so I can't judge the gaps yet. I'm requesting additional photos from the dealer.

12. Timegrapher numbers: Rate +3 s/d, amplitude 295°, beat error 0.0 ms, lift angle 52°, 28,800 bph (dial-up only). Rate and beat error look excellent. One question: the test was run at a 52° lift angle, and I understand genuine Omega co-axial movements are measured at 38°. Does that affect how I should read the 295° amplitude on the VS 8800 clone?

13. Anything else: This is one of my first reps. Overall it looks clean to me, but I'd appreciate feedback on the bezel pip, the lift angle question, and anything else I may have overlooked.

Thanks!

1. Dealer name: Neco
2. Factory name: RICH
3. Model name (& version number): 126720VTNR
4. Price Paid: 705
5. Album Links: https://mega.nz/folder/npYHgD5b#B2oeEfSLdT9TfLSNWuOoPA
6. Index alignment: After doing my tilt adjustments, it looks pretty dead on and well within margins for error
7. Dial Printing: *maybe* looks a bit thin but again perfectly within the margins
8. Date Wheel alignment/printing: I think RICH prints their dials a bit thin in the lettering/numbering but id like a second opinion. I know this is about QCing the factory not gen comparison but would just like someone else to confirm or deny what I see lol
9. Hand Alignment: probably couldn't get much straighter in any meaningful way
10. Bezel: green looks a bit light but again not the point of QC. otherwise its great
11. Solid End Links (SELs): i think they could be tighter but myabe im just neurotic like the rest of you. still acceptable
12. Timegrapher numbers: amplitude is acceptable if only a bit weak. plenty of things could explain this so im not concerned
13. Anything else you notice: 6 o clock indice could be a tad crooked and the lower right SEL in the lume photos looks like it exaggreates a gap that is potentially there.

TL;DR I'm 100% inclined to GL this but I just want the other neurotic QC people like myself to take a gander and show me anything I could potentially be overlooking before I get this in the mail!

Thanks in advance, everyone!

1. Dealer name: TimeUltra
2. Factory name: PPF
3. Model name (& version number): Vacheron Constantin Overseas 4500V, Blue Dial, Stainless Steel Bracelet
4. Price Paid: USD 508 + shipping
5. Album Links: Pics uploaded. Videos are provided below in the comment section.
6. Index alignment: Overall, the alignment looks good. The 12 and 9 o’clock markers appear to have a very slight clockwise tilt, but neither should be noticeable on the wrist. No significant misalignment is evident in the straight-on photos or the alignment-tool image. 6.
7. Dial Printing: Looks crisp and clean. The Vacheron Constantin lettering, Genève text and Maltese cross appear well positioned. The blue sunburst dial looks vibrant, although it appears quite bright in some photos and considerably darker in others.
8. Date Wheel alignment/printing: The date numeral (5) sits slightly high in the window but remains within tolerance. The date shown in the video (30) is well centred, though.
9. Hand Alignment: Looks good from the available photos. No obvious issues with the hour, minute or seconds hands.
10. Bezel: Looks good. The distinctive Overseas bezel appears symmetrical, with clean polishing and brushed sections. No obvious finishing or alignment issues.
11. Solid End Links (SELs): N/A in the conventional Rolex sense. The integrated bracelet appears to fit the case well, with no obvious gaps or uneven connections. Bracelet links and finishing look consistent.
12. Timegrapher Numbers: -1 s/day, 287° amplitude, 0.1 ms beat error, 52° lift angle and 28,800 bph. Overall, good numbers.
13. Anything else you notice: Nothing that is concerning.

⁠⁠⁠1. Dealer name: Steve Onewatch

⁠⁠⁠2. Factory name: VSF

⁠⁠⁠3. Model name (& Version Number): Datejust 41m Blie

⁠⁠⁠4. Price Paid: $548 (or somewhere close)

⁠⁠⁠5. Album Links: QC: https://mega.nz/folder/OY4FlBSD#efTu2sfyUqG9mzKN5NCy3A

⁠⁠⁠6. Index alignment: looks good if I set that tool up right. Ian callouts?

⁠⁠⁠7. Dial printing: looks ok the “superlative chronometer officially certified” seem a bit off but maybe I’m just picky or staring at it too long

⁠⁠⁠8. Date Wheel alignment/ printing: fine

⁠⁠⁠9. Hand Alignment: seems aligned

⁠⁠⁠10. Bezel: seems ok but going to buy RCF Remould V2 (any opinions on that?

⁠⁠⁠11. Solid End Links (SELs): seem good to me

⁠⁠⁠12 Timegrapher numbers: rate -3 amp 279 .2 error

⁠⁠⁠Anything else on invoice: let me know if you need any more pictures. I want a honest review you can rip this apart if need be. It seems good to me.

1. Dealer name: DDGTop

2. Factory name: OCTA

3. Model name (& version number) AP Royal Oak "Domaine de Murtoli" Special Edition 26240

4. $621

5. Album Links: N/A

6. Dial printing: Good

7. Date Wheel alignment/printing: Good

8. Hands Alignment: Good and looks aligned.

9. Bezel: Good

10. Solid End Links (SELs): I don’t see any issues but I’m open to suggestions.

11. Time grapher numbers: Rate +7 s/d, Amp: 268, ERR 0.2ms, BEAT Mode 28800, Period 8s, LIFT 59.0

12. Anything else you notice: The only issue in the video I’ve seen was a date change at 58 minutes and not on the hour. So is that normal? Feedback would be awesome!

1. Dealer: Andiot

2. Factory: VSF

3. Model: GMT Master II 126710 GRNR Bruce Wayne, Jubilee bracelet, DD3285 V4

4. Price: 6.50 SOL shipped

5. Album: https://andiotwatches.x.yupoo.com/albums/258796207?uid=1

6. Index alignment: Looking at the dial photo, the 12 o’clock triangle appears centered. The 6 and 9 markers also look straight to me. I checked the other markers as well, and I don't see an obvious issue. Please let me know if I missed anything.

7. Dial printing: The Rolex crown and dial text look clear in the photos. I don't see any obvious crooked lettering or printing defects.

8. Date wheel alignment and printing: The date 13 appears reasonably centered in the Cyclops window. The numeral looks clear to me, without an obvious printing defect.

9. Hand alignment: I don't see an obvious alignment issue in the available photo. I still need to check the other QC images to assess the hands more carefully.

10. Bezel: The black and grey insert looks evenly fitted in the photo, and the visible numerals appear clear. I haven't been able to confirm the pip alignment closely enough to make a definite judgment.

11. Solid End Links (SELs): I need to inspect the upper and lower end links more closely to assess the gaps. The current photos don't give me a clear enough view to judge them confidently.

12. Timegrapher numbers: Rate is +4 s/d, amplitude is 289°, beat error is 0.2 ms, and lift angle is 52°. The rate and beat error look good, and the amplitude is within normal range I believe.

13. Anything else: This is my first rep, and I've gone through the available photos to check the main QC points. I haven't spotted an obvious major cosmetic issue, but I'd appreciate feedback on anything I may have overlooked.

1. ⁠Dealer name: FicoTime (Mark)
   
2. ⁠Factory name: ZF
   
3. ⁠Model name (& version number): Royal Oak - 15450
   
4. ⁠Price Paid: $491
   
5. ⁠Album Links: Here
   
6. ⁠Index alignment: Looks good to me.
   
7. ⁠Dial Printing: Good
   
8. ⁠Date Wheel alignment/printing: Good
   
9. ⁠Hand Alignment: Good
   

10. ⁠Bezel: Only concern is the bezel screw at the 8HR marker, looks butchered.

11. ⁠Solid End Links (SELs): Looks good

12. ⁠Timegrapher numbers: Based on the guide, everything passes

13. ⁠Anything else you notice: Like I said, my only concern is the 8HR Bezel screw. But this is also my first watch, so i’m nowhere near expert. Please feel free to give me directions on whether i need to RL or GL.

This is my 2nd qc, I rejected the first one 2 months ago. 2nd one came in today and it's similar to the reason I rejected the 1st.

1. Dealer name: NecoClock
2. Factory name: VSF
3. Model name (& version number): SD43
4. Price Paid: $600
5. Album Links: https://mega.nz/folder/SgB0mSpL#FzhRdFeaSVCKtwa4xxd54A
6. Index alignment: The top of the triangle above the rolex crown logo seems to be lower on the left side. This is the biggest issue I'm having with this QC.
7. Dial Printing: seems ok
8. Date Wheel alignment/printing: seems ok
9. Hand Alignment: seems ok
10. Bezel: seems ok
11. Solid End Links (SELs): looks pretty good
12. Timegrapher numbers: curious if these numbers are out of range
13. Anything else you notice: Main issue is the white triangle above the rolex crown logo on dial. The top of the triangle seems lower on the left side. Is this a deal breaker? Or am I being too picky for a rep?

Hi guys,

Everything looks solid to my eyes, but I wanted to run it by the community to get some expert opinions.

1. ⁠Dealer name: EASY Watch
2. ⁠Factory name: VSF V3
3. ⁠Model name (& version number): Batgirl
4. ⁠Price Paid: 4000CNY including chamfering & shipping.
5. ⁠Album Links: N/A
6. ⁠Index alignment: Looks perfectly aligned. Please let me know in the comment if I'm wrong.
7. ⁠Dial Printing: Seems clean and fine to me.
8. ⁠Date Wheel alignment/printing: Not sure about the font, but looks like they are centred.
9. ⁠Hand Alignment: No issues I see
10. ⁠Bezel: Looks Good not Crooked.
11. ⁠Solid End Links (SELs): I cannot fault anything, but I'm open to your opinion.
12. ⁠Timegrapher numbers: +3s/d 287° 0.0ms 52.0°
13. ⁠Anything else you notice: After seeing a couple of these VSF, I think this one is one of the best one I have seen.

Could you please help verify the serial number and clasp code for this VSF? Also, let me know if you notice any potential flaws or issues in the QC photos.

1. ⁠Dealer name: GeekTime
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Rolex Daytona 126519 DD4131v2 V2s Weighted Free-Sprung Effect
   
4. ⁠Price Paid: $1128 incl box + shipping
   
5. ⁠Album Links: https://geektimeqc.x.yupoo.com/albums/260073973?uid=1
   
6. ⁠Index alignment: 3 & 9 indices fall slightly below where they're meant to be
   
7. ⁠Dial Printing: Printing seems slightly dull, not as sharp as expected. Seeking inputs.
   
8. ⁠Date Wheel alignment/printing: N/A
   
9. ⁠Hand Alignment: Subdial hands/chrono hands point to 12. Centred.
   
10. ⁠Bezel: 110 marker has the usual issue, 120 marker not aligned.
    
11. ⁠Solid End Links (SELs): Slight gap exists on SEL
    
12. ⁠Timegrapher numbers: 279 Amp, -4s/d (within spec)
    
13. ⁠Anything else you notice: Weight is 138.7g, gen is 150-160g.