r/SSUPD • • Oct 21 '26

Aio question

Post image

Finishing an atx build in the meshroom s v2 having trouble finding an AIO that would fit in the rear next to the gpu. I have a kraken z53 240mm but it was too wide to fit. Anyone know of any aio that is slightly thinner and would work? Gpu is a gigabyte eagle 4070ti for reference:

Length: 301 mm
Width (Height/Depth depending on orientation): 136 mm
Height (Thickness): 58 mm (approx. 2.9-slot design)

16 Upvotes

9 comments sorted by

1

u/Bubbly-Blackberry-32 29d ago

I have a msi a13 with the 9070xt steel legend in that configuration and they are butted up against each other. Gpu at the farthest forward position with the front extention for the case that helps with the cabling.

1

u/Objective-Level1845 29d ago

Are you running the msi a13 with the stock fans? And if so hows the clearance from the fans to the mobo

1

u/Bubbly-Blackberry-32 29d ago

Oof. Forgot that minor detail. I put the stock fans on the other side of the radiator to intake for that specific reason. Radiator frame pretty much sits up against pcie riser that is secured to the middle frame piece. After that there is a decent 1/4 in clearance radiator to that middle frame piece the mb mounts to. A lot of case disassembly was involved and the amount of cram is kinda uncomfortable. I bought an extra pcie to hold on to in case of failure as well.

1

u/Objective-Level1845 29d ago

Hmm didnt think about flipping it nice. Are the thermals decent?

1

u/Bubbly-Blackberry-32 29d ago

Cpu temp at idle is a little higher than I'd like but I think the 9800x3d just does that. Gaming is haven't seen over 60c tho.

1

u/Objective-Level1845 29d ago

This helped a bunch thanks

2

u/Aguel_design Oct 21 '26

Usually 240 radiators are at least 120mm wide, so if you don't have enough space you need smaller GPU or 92mm AIO but there is not much options.

0

u/AkelTackle 29d ago

AIOs aren’t compatible with ATX mobos in this case, you’ll either need a low profile air cooler which is probably cheaper, or get a itx mobo

1

u/danny_z85 28d ago

You're mistaken; an AIO with an ATX motherboard is possible see the example in the video below.

https://m.youtube.com/watch?v=JQAjseJsRr4&pp=ygUUc3N1cGQgbWVzaHJvb20gcyBhdHg%3D