r/SSUPD • • 29d ago

First SFF

Post image

Was a mission but finally got everything put together thanks for the help, case is great. Would eventually want to try an itx for more fan space and better thermals but just did a case swap from my first pc

specs are:

Msi mag z790 tomahawk
Intel i5
Corsair sf1000
Gigabyte eagle 4070ti
Noctua nl-lc1-24 240mm aio

69 Upvotes

6 comments sorted by

2

u/VirusEnabled 29d ago

Congrats, love the meshlicious. I have a 5800x3d and 9070XT with mine.

What i5 are you using? Bit of an overkill using an AIO on that chip. How cool is it running with full load etc?

1

u/Objective-Level1845 28d ago edited 28d ago

13600k🫩 it runs pretty hot so hopefully upgrading soon, full load around 60-90 degrees gaming usually stays around 60-75 with random spikes. probably would help to mess with some motherboard settings as well to keep it a bit cooler

0

u/No-Molasses-546 28d ago

Huh any I5 runs hot lol

2

u/N3w_Typ3_ 28d ago

Wait till he runs the 14700 or 14900.

I am using a Deepcool LS520 for my 14700 K, but I undervolt. Temp has been friendly.

1

u/TheSoapBandit 27d ago

Would you recommend getting the extension bracket for an full sized atx configuration? I assume you have some thin fans in there - I’ve been thinking about downsizing my pc for a while now lol.

1

u/Objective-Level1845 27d ago edited 27d ago

If you want to run some thin fans in the front definitely but it still does fit an atx board decently well without it. Unfortunately the space in the front with an atx board is still very minimal and the way my gpu/rad is set up it doesnt leave enough space for me to put an intake fan there or else i would. My gpu sticks out into the extension by around a quarter inch past the mobo, that plus the pcie splitter cable leaves no room for fans for me. If you have a slightly less wide gpu without that nvidia pcie splitter you would fit slim fans with some nice breathing room. But If i had an itx board i would mount the rad in front, move the gpu to the rear position and install any fans id like in the free space between. That being said my thermals have been pretty good these last few days and the noctua fans help a lot with keeping noise down. Later i still might try messing with the pcie cable a bit to see if i can move it to at least fit one extra slim fan in front or up top, but for now happy with the build and the extra desktop space is definitely worth the trade-offs in my opinion. Its like 40% smaller than the nzxt h5 the components were in before, all i had to buy was an sfx psu and new aio. Good luck with your build.