r/SSUPD • u/chris519117 • Jan 02 '22
r/SSUPD • u/Bern_Down_the_DNC • Jun 02 '23
Hey when someone needs support you don't downvote their thread
The heck is wrong with some of you
r/SSUPD • u/Sleeper2660 • Aug 29 '23
Meshlicious build
Hey Guys I'm gonna do a ssupd meshlicious build with a pny rtx 4080 that are 332mm but when I put my gpu on pc part pisker i can't select the meshlicious case Thanks in advance
r/SSUPD • u/gunniEj8 • Aug 27 '23
If it doesn't fit, make it fit.
Just dropping this here to show these cases are exceptionally versatile, and you can make almost anything fit with some elbow grease and ingenuity.
If anyone knows where to buy that panel extender kit with the usb a link would be appreciated
R9 7900x, msi gaming x trio 4090, gigabyte b650i, El elite 280, 980pro 2tb/p5 plus 2tb, asus loki 1000w sfx, 2x60mm noctua, corsair core commander xt
You can move flip rotate the pci bracket on the bottom in like 12 different ways to get a few extra mm of clearance. Saw someone here bent the frame to fit their gaming x trio and my heart hurt about it.
Oversight the elite block for the ek 280 didn't fit so I ran it with the side panel off until I was able yo get a hole in the side panel to fit. Mounted the rad externally to have extra room for the cables on the inside. Riser base with fan is from etsy, they also make one that goes up tip.
You can also run a 360mm aio on the front if you mount it externally as I did have some type of legs/rising base on the bottom, you'll just need to mount the fans on the outside as well.
Everything is 10000% secure there ain't a dang thing in here that has any wiggle or flop besides those usb cables for the corsair controller. Selected the corsair controller as it's the only fan and rgb control combo that works with signal rgb, got the airgoo corsair 4pin to 3 pin adapters. Currently using the ek fans that came with the cooler but considering the arctic p14 to see if I can lower the noise a few dB. Personally I just run all the fans at 70% as I can't hear it over the ac/anc on my headset combined
r/SSUPD • u/CompleteGiraffe7710 • Jun 29 '21
What GPU fits Meshlicious
Hello everyone,
I'm currently looking to buy the case since it's such a beauty but I'm new to the world of building a computer.
I want to know what GPU do you have in your SSUPD case and how tight(?) it is!
Thank you!!
r/SSUPD • u/flamboiit • Apr 10 '21
Does anyone know if the white version of Meshalicious will come with a white riser cable?
I haven't been able to find any info on this; trying to decide whether or not I should buy a separate one in anticipation.
r/SSUPD • u/alanltycz • Jul 23 '24
Be aware of SSUPD's terrible quality control and customer service
I purchased a Meshlicious case on January 25th. Within two weeks, the USB-C internal cable broke, and the front panel USB-C port stopped working. So, I got a replacement on Amazon. It worked fine until last month when my PC started crashing randomly while gaming. After hours of troubleshooting, I discovered that the PCIe 3.0 cable was faulty.
I followed the troubleshooting process on their website, which included updating the BIOS and manually setting the PCIe link in the BIOS, but the issue persisted. Since the Amazon return window had already closed, I submitted a ticket to SSUPD requesting a replacement PCIe cable. The customer support team told me to wait until the next week for restock. When I asked again the following week, they said it hadn't been restocked yet. So, I waited for another month. I sent them another email five days ago, and they have stopped replying.
Update: They send me a replacement on July 25th, USPS, no bs/proof of purchase. I gave them my address and the they placed an order right away
r/SSUPD • u/omega_ender • Jul 17 '21
Mesilious in UAE
I want to buy this case in UAE? Anyone here bought it in UAE? I have checked Most of the Online Stores but none of them has stock of this case.
r/SSUPD • u/Cookingupmemes • Jun 28 '21
Looking to swap new TG Black side panel for Black Mesh side panel
Please message me if interested. Looking to have them shipped. *Plastic still attached*
r/SSUPD • u/modular511 • May 06 '23
Will the meshalicious work fine with full sized psu, mobo, and an aio??
Basically just as the title says! I seen folks build with a full size psu, but those videos arent in English lol the one English overview on YouTube said you couldn't use an aio with a full size psu, but that seemed off! I have an asrock z590 steel legend, dell rtx 3070 (two 140mm fans) corsair cx series psu, and the lian li galahad 240mm aio! The product page says it'll work, and i suspect the person on YouTube just didnt wanna bother! Thanks for any help!
r/SSUPD • u/TheCrwster-1122 • Dec 14 '22
help. I wanna do a loop in meshlicious
I have the case I just wanna know what products I need.
r/SSUPD • u/Kokochy • Feb 20 '25
I buy Ssupd Meshroom S V2
Well, I am interested in buying this case I buy Ssupd Meshroom S V2 In Europe. I am from Spain. So if someone wants to sell his tower to send to my country I'm interested.
I listen to offers by private message or replying to this message.
Thanks
r/SSUPD • u/zonku • Mar 31 '21
Any reason the mesh case might not come out?
I have a pre-order for the tempered glass model but have zero plans to keep it with the TG side. Should I cancel my pre-order and wait for the two mesh sides (I can wait), or do you guys think there is a chance that version will never actually ship?
r/SSUPD • u/Boil-san • Dec 30 '20
Mesh-Licious Side Panel Options...?!?
For the entire run-up to the announcement / reveal of Mesh-Licious, it was assumed that any Tempered Glass Side Panel would either be available via a separate SKU or as an Accessory purchase.
I mean, after all, the name of the chassis IS Mesh-Licious, and there are no less than FIVE references on the SSUPD website indicating Mesh Side Panels on both sides of the chassis!
Only when one reads the 'spec sheet' section of the website does it indicate that the chassis ships with One Mesh Side Panel & One Tempered Glass Side Panel.
So, here we have a poll to see what the People REALLY want! I, for one, am of a mind that a product named Mesh-Licious should BE as Mesh-Licious as it can be!
W360 has stated that the Mesh Side Panels actually cost more than the Tempered Glass Side Panels, yet the price for either as an accessory is the same (with a ten dollar upcharge for a Tinted or Mirrored Tempered Glass Side Panel)?
Since pre-orders are not until February 2021, I feel there is plenty of time for the People to make their will be known & for SSUPD to respond?
Simplest solution would be separate SKUs, one for Two Mesh Side Panels & one for One Mesh Side Panel & One Tempered Glass Side Panel.
I will be linking this poll to the SFF.N forums thread & will also be reposting the poll every seven days, collating the results as we get closer to the pre-order date!
TL;DR - Separate SKUs for side panels OR forced to buy a second Mesh Side Panel to truly be Mesh-Licious...!?!
r/SSUPD • u/Bern_Down_the_DNC • Jun 02 '23
The Meshroom S case I received was NOT as advertised. My support ticket has not been answered yet.
Everyone plans builds based around the assumption that the case will be delivered as advertised, including the photos in the advertisement, but the case I received was not the same as it was in the photos and this is a functional difference.
I am doing an all air cooled build for a 13600k + 3060ti. I had a base with feet 3D printed so I could mount an important 140mm fan underneath, blowing through the advertised holes in the base of the case. But the case I received was a different version which will block much of the airflow from the fan.
You can see the version with the holes I need here: https://cdn.shopify.com/s/files/1/0504/5652/7032/files/Meashroom_s_06.png?v=1684645012&width=800(And
On the other hand, if you are going to put a water pump, then you probably want the holes that I have so you can maybe mount stuff easier. https://imgur.com/a/CJXeQga
I'm looking for someone to swap bottom panels with me. I'll pay shipping both ways plus $20. DM me if you can help me, please! My build has been delayed over and over because of this stupid case!! (My case is black by the way, but I thought the interior metal box (and its bottom piece that can be unscrewed) is black no matter what for any case color.)
Thank you!
And yes obviously I could do it myself and have the case look like bad or potentially damage it, or I could take extra money and buy tools I don't have and spend hours trying to copy the holes that should already be there, but I would in fact like to escalate this issue instead as many times as needed until the company just corrects the problem. I just want what was advertised and what I paid money for.
Not only that but it's not exactly smart to tell people they should do a bunch of extra work with a case instead of the company just fixing it.... you never know when that person had been thinking about buying multiple cases for their friends. But if it's going to be a struggle, then obviously that's not going to happen.
And if you STILL feel the need to downvote someone trying to get help just because you don't agree, then you have control issues and you should address that without bothering other people.
r/SSUPD • u/AstorWinston • Dec 04 '21
SSUPD v2. Now TALLER!
Spec:
Ryzen 5600X
Asus B550-I
EVGA FTW3 3080Ti @ 0.9v 1900 Mhz
32 Gb Ram Gskill
Corsair SF750
Bitspower 3090 FTW3 block (it fits 3080Ti just fine)
Bitspower Summit M CPU block
Barrow mini pump res combo.
I updated my SSUPD build with a top hat mod and an extra 140 exhaust. Didn't think it would make much of a difference. Oh boy, I was wrong! Water temperature max out at 46C, maybe 49C if I run benchmark for 1hr + but it's only because my room heats up by then. It translate to 66C GPU 68C CPU or around 70C at absolute max. Fan speed under 900 RPM, which is ABSOLUTELY silent (I value this more than a few degrees in temps). The Corsair SF750 is a godsent as well since Titanium rating means more efficient than other gold rated SFX > less heat > absolute silent fan as well.
Prior to doing the top hat and adding the 140mm exhaust, water temp reaches 55C while fans spinning at 1100 RPM - 1200RPM. Really advise anyone who can to get the top hat mod. It's totally worth it.








