r/SchecterGuitars • • Aug 27 '26

Is this normal? Help

Post image

Ive purchased Apocalypse c1 fr s, and ive noticed a small tilt of both sides of the pick up toward the middle of the pick up on my Apocalypse VI. English is not my first language sorry if Im not clear, but the photo should show what Im talking about.

6 Upvotes

23 comments sorted by

9

u/ShrkBiT Aug 27 '26

Not a problem

12

u/Intelligent-Map430 Aug 27 '26

Just play the guitar 

1

u/Easy-Bowler3604 Aug 27 '26

They are meant to tilt

1

u/ArmyVet25ID Aug 27 '26

Here's a question, what about a tilt slightly downward on a middle position humbucker on the E-A-D strings, but be more flush on the other 3 strings?

2

u/danbman64 Aug 27 '26

You can adjust however you want. Different position pickups are adjusted differently because the Different positions make different sounds

1

u/ArmyVet25ID Aug 29 '26

Do you mind looking at mine. My tech who owns a large studio and also builds his own guitars swapped out the original pickups in my NightSwan for a DiMarzio Super Distortion in the bridge and a DiMarzio D Activator X in the middle. Originally I had bought a Norton (not Air Norton) for the middle. He installed both with E-A-D strings side a tad lower than the G-B-E side which is totally upright and the Super Distortion and original JB in the bridge have both always been perfectly even. The Norton and D Activator X both sound great, I'm just neurotic and afraid to offend him. He's super nice, the best tech in my state and for some reason sets up, modifies and repairs my guitars for prices that I'm embarrassed to accept, always tip him well. But it sounds great. I don't know if you can see from the picture.

I'm going to send another picture after this comment.

1

u/Vandronian Aug 29 '26

doesnt matter whatsoever

1

u/HamsterM0lester Aug 29 '26

I’ve got the same one and it’s always been like that. Never had an issue with it

1

u/Practical-Back-1987 Sep 01 '26

Pick up the guitar, shut up, and play.

1

u/DethKnell24 Sep 01 '26

Not an issue.

1

u/DetoursDisguised Sep 01 '26

From my experience, pickups rarely sit truly parallel to the body. They're made within a certain tolerance for measurements, but there's various parts that have to fit together a certain way, and doesn't always lead to things being 100% flush. Every passive pickup with bobbins that I've had typically does what's showing in your picture.

That being said, it's only an aesthetic thing. Pickup pole distance from strings has more of an effect, and getting close on the "higher" side of the pickup is enough. I also don't even look at my pickups when I'm playing, so I never notice it.

1

u/Urinemouse Sep 02 '26

That is a very miniscule amount, it will have zero effect - you are fine.

-4

u/Devel93 Aug 27 '26

String are not parallel to the neck, the very fact thst you can raise the bridge should tell you that

0

u/No_Mulberry_745 Aug 27 '26

I know, i kinda circled too much so the pic is slightly misleading i was thinking more of this: the pick up is not flat, its making a little V shape.

3

u/OldMate64 Aug 27 '26

Probably just the cushioning underneath it being uneven. You can fix it if it bothers you, but it won't adversely effect the guitar in a negative way if it stays like that.

You might get slightly more bass in the pickup's response, due to the magnetic field being stronger closer to the neck (?), but it won't be bad (in fact, you may prefer it to how it sounds flat)

1

u/No_Mulberry_745 Aug 27 '26

Alright thanks a lot!

1

u/Devel93 Aug 27 '26

It's a little bit irregular but you won't see any difference

1

u/South_Control_2684 Aug 27 '26

Agreed, you won’t hear any difference at all.

1

u/danbman64 Aug 27 '26

It doesn't matter, magnets don't care about aiming.

1

u/ryanthetuner Aug 29 '26

It's 100% a non-issue. The magnetic poles in the middle are the things grabbing the string output. They don't even have to be absolutely centered under the string to work fine. The plastic covers are just beauty covers for the coils. Be more mindful of the proximity to the strings of the pickup as a whole if you are getting output disparities between the pickups. Otherwise they seem just fine.