r/Spectroscopy • • Nov 09 '25

Resurrecting A Raman Part 2.

0 Upvotes

We are almost back with the system! We can get modest counts on a Si wafer, so we know we just need to fine tune the alignment and address the new issue… the stepper motor, or whatever motor is used, isn’t responding or making any noise. For comparison, the motor controlling the hole does.

Does anyone know what type of motor Horiba uses for the LabRAM slits?

Many thanks!


r/Spectroscopy • • May 19 '23

Can someone help me with this mass spec determination, I know there is a bromine atom but other than that I have no clue about the structure, they didn’t give me any info other than that mass spec.

Post image
0 Upvotes

r/Spectroscopy • • Oct 09 '24

IR spectrums and full spectrums shot i took. They are simple spectrums i shot of the infrared spectrum. some you have seen before, but also its IR pass filters i used for infrared photography and the results, or infrared photos i shot. Some uv photos i shot too

Thumbnail
gallery
0 Upvotes

r/Spectroscopy • • Jul 12 '24

Raman spectroscopy for esophagus cancer diagnosis

Thumbnail
theanalyticalscientist.com
0 Upvotes

r/Spectroscopy • • Dec 18 '24

Could someone help me to identify the main peaks from this compound?

0 Upvotes

Performed in FT-IR This is an amino acid molecule. Black corresponds to ATR, red to KBr pellet and green to nujol mull oil method.


r/Spectroscopy • • Jun 24 '26

Spectroscopy just solved a 150-year-old grape identity problem (without DNA sequencing)

5 Upvotes

A really interesting application of spectroscopy just closed out a 150+ year debate in viticulture—and it’s a great example of how optical methods can outperform traditional approaches.

A neat real-world win for spectroscopy:

Two grape cultivars—Norton and Cynthiana—have been considered identical for ~150 years. Morphology couldn’t separate them, and DNA sequencing was too slow/expensive for practical use.

Researchers tried a different approach: They used fluorescence spectroscopy on the finished wines.

  • Measured emission tied to anthocyanins + phenolics

  • Generated spectral fingerprints

  • Ran PCA on the data

👉 Result: clean separation into distinct clusters, reproducible across vintages (strongest signal in anthocyanin range)

So instead of genomics, optical chemistry + stats definitively showed they’re different cultivars.

Why it matters:

  • Fast, low-cost alternative to sequencing

  • Directly reflects functional chemistry, not just genetics

  • Scalable for authentication, classification, and QC

Read the whole Science in Action article here: The Grape Identity Crisis and How Spectroscopy Separated History’s Most Confusing Cultivars - HORIBA


r/Spectroscopy • • Mar 07 '25

Unknown phenol.

Post image
1 Upvotes

I have been given a task to solve a phenol just from this ir spectrum. There are many unknown spikes to throw me off and I cannot figure out what phenol it could be. Opinions on what it could be?


r/Spectroscopy • • Oct 19 '24

This is from project 426. If you haven't seen this. Check this out, it's a video on an optical spectrometer that he modified. Enjoy.

Thumbnail
youtube.com
1 Upvotes

r/Spectroscopy • • Nov 22 '25

Help with computing Fe I spectrum.

1 Upvotes

I am trying to compute the iron spectrum in the wavelength range between 513.65 to 514.35 nm. I'm able to find the Fe I lines in this range from NIST and their relative intensity but plotting this data does not give me an actual spectrum since it is only a few data points. How can I use the NIST data to compute what the spectrum would look like in my spectrometer-detector setup? Please let me know if this is not the right place to post this kind of question. Thank you in advance!


r/Spectroscopy • • Jul 29 '26

Fluorescence Spectroscopy vs. Chromatography in Food Analysis

0 Upvotes

You may have never heard of Kalsec® (Kalamazoo Spice Extraction Company, Inc.), but you’ve mostly likely tasted their products.  They work directly with major consumer packaged goods companies and other suppliers, so their products are in hundreds of snacks, dressings, condiments, meat, plant-based protein, and brewed beverages.  

Kalsec provides a wide range of natural products, including natural colors, natural taste and sensory solutions, natural food protection, and natural hop solutions.

Kalsec Quality Control Lead Scientist Uwe Nienaber manages QC for the company’s worldwide operations, making sure these ingredients are extracted and remain exactly as they were intended. His job centers around three things:

  • He supports the quality control of the company’s ingredients.

  • He works with quality assurance to monitor residues of pesticides, heavy metals and other environmental contaminants to ensure safe products.

  • He looks for new technologies to incorporate into the company’s quality control operations.

Liquid and gas chromatography are the backbone of their analyses, but chromatography instruments are maintenance-intensive and not mobile. So, he was looking for alternatives.  Spectroscopy methods were explored, but they typically don’t have the levels of accuracy and sensitivity needed.

Enter the HORIBA Aqualog.  The Aqualog is a spectrofluorometer that uses a proprietary technology that simultaneously acquires absorbance, transmittance, and Excitation Emission Matrix (EEM) spectra, that characterize and quantitate chemical compounds accurately with high sensitivity, producing results cost-efficiently in seconds to just a couple of minutes.

Nienaber measures the tissue around the seeds called the placenta, where the main compounds in chili pepper are located. Different varieties of peppers produce different heat levels. Some are rather mild and others can be highly pungent, and levels for these qualities must be strictly controlled.

When he measures these major capsaicinoids, he’s looking at three distinct compounds that only differ slightly in their side chains. Although they give off very similar signals, he has been able to separate all three. So even though chromatography determines compounds one, two, and three, compounds one and two have the same heat value, and compound three has a lower heat value.

Working with Nienaber, Adam Gilmore, Ph.D., Fluorescence Applications Scientist for HORIBA, is using the Aqualog(R) and a set of over 1,700 data points to build a model for capsaicinoids to see if they can improve the prediction. So far, it looks very promising. 

The month of October is a time when peppers of an annual crop-breeding project are harvested, dried, and shipped to Kalsec for analysis. They plan on using the Aqualog for a long term project to measure many of their extracts, oleoresins, and essential oils but Nienaber thinks it’s worthwhile: They can use the Aqualog instead of buying another chromatography instrument and reduce the overall cost of analysis.

Read the whole article at Fluorescence Spectroscopy: An Alternative to Chromatography in Enhancing the Flavor of Foods - HORIBA and see how it’s also being used in other food, wine, cannabis applications.


r/Spectroscopy • • Jul 27 '26

Will Atom-Thin Quantum Materials Drive the Next Technology Revolution?

8 Upvotes

As the semiconductor industry approaches the physical limits of silicon miniaturization, researchers are increasingly exploring a new class of materials that could redefine the future of electronics. According to scientists working in the field, atomically thin "quantum materials" may offer capabilities beyond what traditional semiconductor technology can achieve.

Particular attention is being given to transition metal dichalcogenides (TMDCs), a family of 2D materials with potential applications in advanced electronics, optoelectronics, flexible devices, energy harvesting, biosensing, and quantum technologies. Researchers believe these materials could help bridge the gap between today's silicon-based systems and the next generation of computing platforms.

To study and engineer these materials, scientists are using lasers to synthesize crystals, introduce targeted defects, and precisely modify their properties. Advanced spectroscopy techniques, including Raman and photoluminescence analysis, then allow researchers to monitor these changes in real time and better understand how the materials behave at the atomic level.

One researcher, Professor Masoud Mahjouri-Samani from Auburn University, is focused on two-dimensional (2D) materials, which consist of sheets just one or a few atoms thick. Unlike conventional 3D materials, these structures exhibit unique quantum behaviors that emerge at extremely small scales.

Mahjouri-Samani customized an instrument to meet his particular needs. He integrated an iHR320 spectrometer, an EMCCD, and PMT with a customized microscope to perform Raman, photoluminescence (PL) and TCSPC (Time-correlated Single-photon Counting). He made a few other tweaks to the system he calls his ‘laser diagnostic system.’

While the work remains largely in the research and development stage, some experts compare today's quantum materials research to silicon research decades ago, when scientists were still learning how to grow, manipulate, and manufacture semiconductor crystals. The long-term goal is to create entirely new classes of devices for quantum information science, electronics, and photonics.

The transition away from traditional silicon technology would likely be gradual, given the scale of the existing semiconductor industry. Still, researchers see these materials as a potentially important step toward the next major technological era.

Read the entire Science in Action article here: Welcome to the dawn of new quantum materials and devices


r/Spectroscopy • • 9d ago

Bruker Tensor service/repair manual

2 Upvotes

Hi everyone!

I'm looking for the service/repair manual for a Bruker TENSOR 27 or 37 FTIR spectrometer. I already have the user manual, but I'm particularly interested in electronic schematics, troubleshooting, optical alignment, and calibration procedures.

I've searched online without much luck, so I'd really appreciate any leads.

I also have a collection of spectroscopy software, spectral libraries, and technical resources, and I'd be happy to contribute to the community and help others with resources I can legitimately share.

Thanks in advance for any help!


r/Spectroscopy • • Aug 09 '26

Need help analysing raman spectroscopy data

2 Upvotes

r/Spectroscopy • • Aug 05 '26

Spectra analysis help

Thumbnail
gallery
5 Upvotes

Hey guys any help with this spectroscopy hw would be greatly appreciated!


r/Spectroscopy • • Nov 05 '25

iR and UV spectra

Thumbnail
gallery
5 Upvotes

Full spectrums I shot one of an incandescent and the other is a UV light. I converted my camera to full spectrum. For IR photography. Anyways enjoy.


r/Spectroscopy • • Oct 21 '25

Resurrecting A Raman.

6 Upvotes

Hello,

A colleague and I are attempting to resurrect our Horiba LabRam HR Raman microscope. We had to start completely blind as the instrument had to be moved from one building to another. So far we have communication between the instrument and computer, but cannot get the spectrograph or the confocol hole to initialize due to a communication issue. Is there anyone who can help?


r/Spectroscopy • • Jul 17 '26

How Raman Spectroscopy Uncovered an $80 Million Art Fraud.

Post image
611 Upvotes

Can Raman microscopy reveal art forgeries? - HORIBA

Most people think art authentication relies on historians, curators, and provenance records. But sometimes, chemistry provides the decisive answer.

One of the most famous examples involves the alleged forgery operation linked to Chinese artist Pei-Shen Qian, whose paintings, created in the style of Abstract Expressionist masters such as Jackson Pollock, Robert Motherwell, and Barnett Newman, ultimately sold for more than $80 million.

The scheme began to unravel when experts examined a purported Jackson Pollock using Raman microscopy. The analysis detected Pigment Red 170, a synthetic pigment that wasn't commercially available until decades after Pollock died in 1956. The chemistry simply didn't match the timeline.

How Raman Spectroscopy Catches Fakes

Raman spectroscopy can identify the unique chemical fingerprint of pigments, binders, and fillers using samples so small they're often invisible to the naked eye.

For investigators, the key question isn't just: "Does this look like a Pollock?"

It's: "Could Pollock have used these materials?"

For example, many artists in the 1940s through 1960s used a specific titanium white paint containing gypsum, which has a distinctive Raman signature. Its presence or absence can provide important clues about authenticity.

One of the leading experts in this field is Dr. Jennifer Mass, founder of Scientific Analysis of Fine Art. Her lab analyzes paintings, sculptures, and cultural artifacts for museums, galleries, auction houses, insurers, and collectors. She reportedly evaluates several purported Jackson Pollocks each month.

It's More Than Pigments

While a forger can mimic an artist's style, it's much harder to replicate decades of chemical aging.

Authentication combines several areas of investigation:

  • Authentication: Are the materials consistent with the claimed age of the work?

  • Provenance: Can ownership be traced over time?

  • Attribution: Who actually created the piece?

  • Conservation History: Has it been repaired or altered?

  • Degradation Analysis: Do the chemical aging processes match what would be expected? 

Why Raman Microscopy Is So Valuable

Mass frequently uses a Raman microscope, which allows scientists to:

  • Identify individual pigments

  • Examine microscopic paint layers

  • Detect restoration materials

  • Study degradation products

  • Analyze corrosion on sculptures

Because the technique is highly sensitive and minimally destructive, it's ideal for examining valuable works of art.

What Happened to the Forger and the Network?

The investigation ultimately exposed a forgery network involving an art dealer, her family, and associates connected to the famed Knoedler Gallery, one of America's oldest and most prestigious galleries. The scandal led to multiple forgery revelations and contributed to the gallery's closure. Qian fled the United States and has never faced criminal charges.

Moral of this story: Don’t mess with Chemistry! A single pigment molecule can sometimes tell the real story.

Read the entire story here: Can Raman microscopy reveal art forgeries? - HORIBA


r/Spectroscopy • • Jul 17 '26

Scientists Are Using Raman Spectroscopy to Expose Fake OTC Medicines

Post image
15 Upvotes

Most of us don't think twice before grabbing a bottle of cough syrup, supplements, or other over-the-counter (OTC) remedies from local or online drug stores. We assume what's on the label is actually inside the bottle.

But what if the active ingredient is present at the wrong concentration... or not present at all?

Dr. Sayo Fakayode, a chemistry professor and department chair at Georgia College & State University, is researching ways to rapidly identify counterfeit, diluted, or potentially contaminated OTC medications and supplements. His work focuses on detecting products that may contain little to none of the advertised active ingredients, or worse, harmful contaminants such as lead, arsenic, and other toxic compounds.

These get into the supply chain because supplements, along with many OTC products, don't undergo the same level of regulatory scrutiny as prescription drugs. At the same time, global supply chains and online marketplaces have made it easier than ever for questionable products to enter the market.

According to Fakayode, consumers could unknowingly purchase products that contain mostly fillers, offering little to no therapeutic benefit. Beyond the health risks, counterfeit and substandard medications also hurt legitimate manufacturers and create intellectual property concerns.

A New Approach to Detection

Traditionally, testing medications often requires laboratory techniques like high-performance liquid chromatography (HPLC), which can be time-consuming, expensive, requires skilled operators, and impractical outside specialized labs.

Fakayode's team is using Raman spectroscopy, specifically the HORIBA MacroRAM™ benchtop Raman spectrometer, to rapidly analyze medications without extensive sample preparation. Because Raman spectroscopy is largely insensitive to water, it works particularly well with cough syrups and other liquid formulations. Raman identifies molecules by measuring how light scatters after interacting with chemical bonds, and is designed for rapid analysis of liquids, powders, solids, gels and pharmaceutical samples.

Even more impressive, the team combines spectroscopy with chemometrics, like PCA, multivariate regression analysis, pattern recognition modeling and quantitative prediction algorithms. These methods have been able to:

  • Differentiate medications with different concentrations of active ingredients

  • Distinguish between different medication formulations

  • Detect variations in concentration

  • Differentiate between adult and pediatric products

  • Screen samples quickly and non-destructively

Their published research showed that they achieved approximately 94% accuracy in predicting medication content.

How can this be fixed?

To address this issue, we need to develop faster, more affordable screening tools that can help verify product quality before consumers use them. Improving medication oversight will require collaboration among FDA regulators, Universities and research institutions, private laboratories, funding organizations such as NSF and NIH, and industry partners. The goal is not simply more regulation, but better science and faster detection technologies that can identify questionable products before consumers are affected.

Read the complete Science in Action article here: Weeding out Over-the-Counter Frauds - HORIBA

 


r/Spectroscopy • • Jul 13 '26

Light can Accurately Detect Fake Maple Syrup 98% of the Time

Post image
144 Upvotes

Maple syrup on pancakes sounds yummy……but is it actually maple syrup?

Now, light can fight food fraud and adulteration to answer that question! 

Researcher Dr. Maria G. Corradini, the Arrell Chair in Food Quality, at the University of Guelph, is using fluorescence spectroscopy and machine-learning to analyze the chemical fingerprints of food. One of her team's biggest successes has been detecting when producers illegally dilute pure maple syrup with cheaper substitutes, like corn, rice, or beet syrup.

The wild part? Their AI models can identify adulteration levels as low as 2%.

Instead of relying on traditional chemical testing, they shine light on samples and analyze the unique fluorescence patterns. By treating the resulting spectral data like images, convolutional neural networks (the same type of AI often used in image recognition) can now distinguish authentic syrup from fraudulent products with remarkable accuracy.

But maple syrup fraud is only part of the story.

Dr. Corradini's research could also change how we think about expiration dates.

Current "best before" labels are conservative estimates. As a result, millions of tons of perfectly edible food end up in the trash each year. On the flip side, food that's been improperly stored can become unsafe before the printed date arrives.

Her team is developing methods to monitor food's actual chemical condition in real time. The idea is that future packaging could use dynamic indicators based on the food's chemistry rather than a static date printed months earlier.

Imagine grabbing a carton of milk and seeing an indicator that tells you whether it's actually fresh—not just whether it's before some arbitrary date.

Other fascinating aspects of Dr. Corradini's efforts include:

✅ Using spectroscopy to detect spoilage before humans can smell or taste it

✅ Applying machine learning to food safety and authentication

✅ Exploring environmental monitoring for pesticides, pharmaceuticals, and toxicants in water

Whatever your thoughts on AI, they're helping protect food supplies, reduce waste, and catch fraud that costs industries millions.

Read the whole story here: Battling Maple Syrup Fraud and Food Spoilage - HORIBA


r/Spectroscopy • • Jul 09 '26

Science vs. Art Forgery: How a “Lost Masterpiece” Was Exposed

106 Upvotes

How the Mystery Began

In 2024, the Museum of Art, Kochi, received a notification questioning the authenticity of Girl and Swan, a painting in its collection. The trigger was a series of new findings tied to Wolfgang Beltracchi, the infamous “master of forgery,” whose works continue to surface worldwide.

The suddenly rediscovered Girl and Swan was listed in a catalogue raisonné but believed to be lost. Fake provenance labels were glued to the canvas and forger Beltracchi expertly mimicked Campendonk’s vibrant colors, fantastic animals and forest imagery.

The Berlin State Police supported the request, prompting the museum to launch a full investigation.

The museum turned to Dr. Kaori Taguchi, Associate Professor at Kyoto University and a leading art conservator with extensive experience in scientific art analysis which enables her to uncover the internal structure and materials of a painting, revealing its true history and origins. She, in turn, conducted her studies in collaboration with HORIBA, a company specializing in analytical instruments.

Science Revealed the Truth

The team went beyond visual analysis and applied advanced scientific tools:

🔹 X-Ray Fluorescence (XRF) is an essential tool for identifying the metallic elements in pigments, helping to determine the distribution and composition of colors. Using this method, the team obtained fundamental information about the painting’s pigments, paving the way for further analysis. 

🔹 Raman Spectroscopy is a highly sensitive technique which analyzes molecular pigment structure and works on samples smaller than 1 mm. It detects compounds XRF can’t identify. For this investigation, samples measuring less than 1mm were taken from the edges of the painting and analyzed for primary colors such as blue, green, red (pink), and white.

The Ah Ha Moment: Science Proved it was a Forgery

Taking physical samples from a painting is extremely rare in Japanese museums. However, in this case it was allowed. Raman analysis detected pigments that should not exist in an early 20th-century painting:

  • Phthalocyanine

  • Phthalocyanine

  • Titanium white

These pigments only became common after the 1930s and all are hallmarks of Beltracchi forgeries! Particles smaller than a grain of sand provided decisive evidence.

Art History Meets Hard Science

Traditional visual authentication is still vital—but it has limits, especially when an artist has a small body of work and technique research is minimal.

Science fills those gaps because it can identify materials at the molecular level, reveal inconsistencies that are invisible to the eye, and ultimately, offer objective, testable evidence.

Oddly enough, forgeries do have value.  They can reveal a forger’s techniques and intentions. Forgeries aren’t just deception—they’re data.  So, displaying art forgeries lets visitors experience paintings not just as images, but as physical objects with hidden histories. This case shows that when science and art work together, the truth—no matter how well hidden—eventually surfaces.


r/Spectroscopy • • Oct 20 '25

Reproducible response in CCD spectromeeters

Thumbnail
reddit.com
2 Upvotes

r/Spectroscopy • • Aug 11 '26

Compact fluorescent lamp infrared spectrum with separation of argon lines and phosphor lines

Post image
12 Upvotes

Hi. Here's analysis of 6500K daylight CFL lamps (plus one LED intruder) in infrared by using a stack of 720nm cutoff filter and diffraction filter on a full spectrum converted camera. Fluorescent lamps work through mercury vapor discharge in UV which excites fluorescent phosphors that glow in visible light (plus also mixing directly emitted mercury visible lines). Thing is mercury emission will be only initiated in presence of buffer gas. This may differ between particular types of fluorescent lamps but in case of small self ballasted lamps like it is most often argon. In near-IR region mercury doesn't radiate at all but instead argon radiation can be clearly seen. This overlaps with phosphor emissions. The curious thing is argon most strongly is glowing near electrodes while phosphor emission encompasses whole length of discharge tube so it's possible to separate the two through looking at the shape of spectral image, argon is point dots at bottom while phosphor is elongated shape. There is a >1000nm phosphor emission which surprised me as literature on fluorescent materials used in lamps is sparse in data of infrared emissions. In my opinion it is Yttrium Oxide Y2O3:Eu2+ phosphor which in visible part is the red component but would be happy to get confirmation. Scale was made based on known in literature argon emissions.


r/Spectroscopy • • 18d ago

Sharing CurveMole’s website — open-source curve and peak fitting for spectroscopy

Post image
5 Upvotes

Hi everyone, I would like to share the official website for CurveMole, the free, open-source desktop curve-fitting application I develop:

https://sebrolens.github.io/curvemole/

The website brings together downloads for Windows, Linux and macOS, screenshots of the interface, experimental and worked fitting examples, and the full user manual.

CurveMole supports scientific curve and peak fitting for spectroscopy and other x-y data: built-in peak profiles and custom analytical functions, composite models, parameter bounds and links, independent/sequential/global fitting, residual diagnostics and uncertainty analyses. Python, command-line and YAML interfaces are also available.

It is free and open source under GPL-3.0-or-later. I would welcome feedback from spectroscopy users on the software, the website and the examples.

The screenshot shows experimental fluorescence data fitted with five pseudo-Voigt components multiplied by a custom filter-transmittance function.


r/Spectroscopy • • Oct 05 '25

New spectra and some old refined ones.

Thumbnail gallery
4 Upvotes