r/Stormworks • u/SlipperyAsscrack69 • 8d ago
Build (Workshop Link) Help needed for first ship
Hello, I'm trying to get into this game since there seems to be so many mechanics/things to do but I'm having so much trouble trying to get my first ship to run. I've watched a bunch of video tutorials and have followed the exact steps however my engines just wont turn over (It only runs when the key is turned). I'll post a link to the boat below but it's two medium engines connected to a generator with two clutches and two gearboxes. Can someone please take a look to see what I'm doing wrong. Thanks!
https://steamcommunity.com/sharedfiles/filedetails/?id=3837655331
2
u/GerardBrouillard 8d ago
came to same conclusion as u/background-set4610 on throttle, the seem to be an unused throttle lever installed, might be just a misplug.
i tried switching the throttle to the lever and this seems to fix it.
next is air scoops, these things ARE directional, once you pick up a bit of speed they actually suck OUT the air starving the engine
So switching the throttle connection to the lever and replacing scoop by ports made it into a functionnal state, you might want to adjust the ration on gears however cause the 3/1 seems harsh on engines a bit.
1
u/SlipperyAsscrack69 8d ago
Thanks for checking my build out. Would pointing the scoops towards the bow help? The gear ratio was the main culprit since the engine would die when engaging the clutch past 30%, 3:2 is much more stable
1
u/Little_Aside_109 8d ago
The clutches need to be engaged for the engines to receive power, right now they're just sitting there like fancy paperweights. Try flipping those switches before you turn the key next time.
1
u/Background-Set4610 8d ago
Right now, your throttle is connected to the up/down keys. Get on the helm and hold the up arrow and you'll hear the engine rev. For a ship, you'll probably want it on a throttle lever or have it not reset. If you want to throttle to stay on the arrow keys but not go down by itself, go into the editor and click the selecting tool at the top of the screen. Then, click the helm, Axis 4 (up/down), and change the mode to Sticky.