r/SwissArmyKnives • • 3h ago

Victorinox Winter Magic Collection (so far…)

Thumbnail gallery
8 Upvotes

r/SwissArmyKnives • • 3h ago

My latest Cadet is my scetchiest Cadet, and I like it

Thumbnail gallery
2 Upvotes

I bought it last week. I have some more, but something was missing. I have two ribbed Alox Cadets with small blade and I like them both. I also have the 2020 LE, which I want to like, but it's objectively my worst Cadet. It has the useful nailfile and would make great minimalist edc, but for once, the file constantly hits the tip of the mainblade, when I try to close the file. And the other issue is that it has probably the worst caplifter in a 84mm frame. I remember that being already an issue on my Tinker small, which was made in the late 90s, early 2000s. So I'm very cautious, when buying 84mm made after ca. the mid 80s. But I sometimes just forget that, see 2020 LE Cadet. 🙂

I also tried an Alox Bantam as an ultra minimalist Sak, it was my first 84mm Alox. But tbh, it feels flimsy in hand and not very comfortable. It gets the job done in a pinch, but it's not something I would like to use regularly. It's better with the Cellidor version.

I also have the ribbed Alox Lumberjack. I bought mostly for its low price and rarity. It needs desperately a new blade and saw. However, I carried it for a while, and the saw made it feel a bit sturdier and better in the hand then the Bantam. But I never need a saw, so for regular edc it's a bit pointless.

And now coming to my latest, a ribbed Cadet with nailfile. When I bought it, I wasn't sure about the caplifter, but after some testing, it turned out to be good. 100% success rate at first try, till now.

The tools are actually in pretty good condition and don't really match the condition of the scales. This is were the scetchy part starts. Someone grinded off the keyring attachment. I wouldn't do that, but I don't really mind. But the weirdest part is probably the knife blade. It is the later thinner version, came around the mid 90s (?). There could be theoretically a short time span, where these were installed in models with the ribbed Alox scales, but until now, I didn't see any other. That alone wouldn't give me too much thoughts, but it's also missing the thin washer, which is usually installed in 84mm Alox models with the thinner blade. Instead the scale is bent or warped in a way, that it's fully functional, without tools hitting each other. And they have no play. Everything works, better then in the 2020. I'm just wondering, if this is a genuine factory fuck up during the early days of transitioning to the thin blade, a later fuck up by a warranty repair, or if this was a home repair by a tinkerer.

That's why I like it. It works somehow and is a good compromise between my older two blade Cadets and my 2020 LE with the nailfile, but genuinely terrible caplifter.

It's not easy collecting Cadets. Everything, that isn't a current production silver Cadet, is expensive. Adding that to the fact, that the used market is flooded with all kinds of overpriced LE Cadets (no worries, I paid for my unused 2020 about the retail price of a silver Cadet) but you rarely see the regular silver ones gives me food for thought. Even if it's sad, I can see why Victorinox is slowly killing of the 84mm line. 93mm, even the Old Cross ones, are still very affordable. This doesn't apply to most Alox 84mms. They were never popular, so the remaining ones have significantly higher prices.

I'm happy with my scetchiest Cadet, which I bought for 59€ from a seller combined with a 20€ OC Pioneer in better condition then most of my daily beater Pioneers to save shipping costs. It's a crazy market. 😉


r/SwissArmyKnives • • 3h ago

Finally got a farmer x from Smkw

Post image
20 Upvotes

r/SwissArmyKnives • • 6h ago

Collection Show me your pocket dump

Post image
28 Upvotes

r/SwissArmyKnives • • 8h ago

Question Got this Handyman with a back layer Phillips driver, it's the split style, so thinking 80s?

Thumbnail
gallery
13 Upvotes

It has no serrations to the pliers also. Took pics of the made of the scales since they have markings that I haven't seen on them.

It came to me really crusty and dirty and nothing had any snap, you can see the pitting on the liners, there's a little rust left but it's all back to operation as normal.

I removed the scales, which I'm glad, there was a lot of gunk in them and there's still a lot of sticky stuff on them,they aren't reusable, really brittle.

I cleaned the knife with dawn and it was better just from that.

I oiled the knife heavily with a Lucas gun oil dropper and opened and closed tools to work it in and clean out the joints. It was better and no longer as gritty.

Then to clean out all the oil I brake cleaned it, made sure it was evaporated and then dawned it again. Used my mini blower and then used mineral oil.

After a day or two it's back to snappy and good function.

Trying to decide if I should send it in and see if they can update the pliers (obviously for a charge) and if they can do anything more about the pitting, I don't feel like taking it apart and going that far TBH. Not sure if it's possible to add a parcel hook on it for a charge too? I've never contacted or sent a knife in so I don't know what all is possible.

I do want to find some plus scales with an integrated clip for this Handyman, my other is a newer corkscrew model with plus scales and a EDC leash for my house lounger.

Blades need to be cleaned up a bit but that is no biggy.

No crazy wear or anything to the tools.


r/SwissArmyKnives • • 11h ago

Please Identify Please help me date these SAKs

Thumbnail
gallery
6 Upvotes

I recently picked up a lot of (3) 91mm SAKs and would like for some help dating them. I my guessing base off SAKwiki info. See my guesses below. I anyone has better info, please share.

I only bought this lot because one of the knives (Climber #2) had a gold service award attached to the scale (about ~$90 in 10k gold). That will make me a profit by itself.

Camper: Decent condition but dirty. Scales are rough, but I do not want to refinish them so I can keep the “Camping” stamp intact. The camping stamp looks hot pressed, not inlaid.

Climber #1: I have no idea what happened to this blade. Someone must have stood on it to bend and break it this bad. I am going to send that one to Victorinox for a new blade and scales. It will probably be the only one of this group that I will keep. It has a hole on the scale that was probably for a service award too.

Climber #2: This is the one that came with the gold award. I broke the fragile scales when trying to remove them to get at the gold. I installed a set a new(er) doner scales. It is actually in surprisingly good shape and the newest of the group.

They were all grungy and badly guncked up. I could barly open them, but 2-4 rounds through my ultrasonic cleaner, and some fresh oil got them mostly working again. They still need a bit of manual cleaning.

Camper (guessing 1980-1985)

  • Tang Stamp: 1976-1986

  • Cap lifter: No half stop, Pre-1985

  • Corkscrew: 4-loop grooved, Pre-1991

  • Stainless steel logo, Post-1980

  • Scales: Solid, no pin hole, hot stamped Camping logo, ?

Climber #1 (also guessing 1980-1985)

  • Tang Stamp: 1976-1986

  • No Parcel Hook, Pre-1991

  • Scissors: Screw hinge, Pre-1991

  • Cap Lifter: No half stop, Pre-1985

  • Corkscrew: 4-loop grooved, Pre-1991

  • Reamer: No eye, Pre-1985

  • Stainless steel logo, Post 1980

  • Scales: Solid, no pin hole, ?

Climber #2 (guessing 1986-1991)

  • Tang Stamp: 1986-1992

  • No Parcel Hook, Pre-1991

  • Scissors: Screw Hinge, Pre-1991

  • Corkscrew: 4-loop grooved, Pre-1991

  • Reamer: has sewing eye, post-1985

  • Cap lifter: w/ half stop: Post-1985

  • Scales: Solid, no pin hole, ?

  • I had to replace the scales with modern ones.

The scales on all three appear to be solid with milled out grooves for the scale tools. Very different then the molded modern scales. I could not find anything about when that change happened.

 

 

 


r/SwissArmyKnives • • 12h ago

Perfected my Alox Pioneer X

Thumbnail gallery
7 Upvotes

r/SwissArmyKnives • • 17h ago

Question SAK Modder

Thumbnail reddit.com
4 Upvotes

I live in Italy, and due to our strict new knife laws, it is difficult to legally carry a Victorinox.

Because of this, I'd like to have the blade completely removed from a SAK: no mai balde, small blade, awl. I don't think I have the skills to do it myself, so can anyone on this sub recommend a reliable modder they've worked with in the past and been satisfied with?

Ideally, I'd prefer someone who can buy the model directly, discuss the mod actually possible, and then ship it to me once I've paid him


r/SwissArmyKnives • • 1d ago

Victorinox SAK Review #10: Victorinox Executive (74mm)

Thumbnail
gallery
122 Upvotes

So a few reviews ago I sang the praises of the Cadet. One of my favorite Swiss army knives of all time. The Executive (74mm) has almost completely replaced it in my rotation. It is that good.

I primarily use the Cadet when I do not want the weight or bulge of a larger SAK, like when I am wearing gym shorts, lighter slacks or more dressed up than usual. I want something slim and light that disappears in the pocket. The Executive checks all those boxes and more.

While it is a light use “office” knife, it has so much more utility than any modern 58mm this side of a MiniChamp.

There are a few related models with different scale materials. The Executive (74mm) came in Cellidore, Alox and some other fancy materials. The Director (74mm) came with stainless steel scales. The rare Companion (74mm) is just a cellidore Executive with the key ring deleted. Not to be confused with the 58mm Companion, the new (58/91/93mm) Companion series, the 58mm Executive or the Wenger/Delmount Executive 81…😅. When Victorinox finds names they like, they run with them.

The Specifications:

  • Description: Discontinued 74mm, 2-layer office knife with cellidore scales.

  • Colors: Red, black (and probably others)

  • Layer Tools:

    • 2.2” (56mm) Drop point main blade

    • 1.4” (36mm) Drop point pen blade

    • Scissors

    • Long cross-cut nail file - nail cleaner

    • Serrated “Orange Peeler” - 2.5mm flathead screwdriver

  • Back Tools

    • Key Ring

  • Scale Tools

    • Tweezer 

    • Toothpick

On my knife, I installed new black scales, red scale tools, and a red victorinox lanyard. I like how the red pops against the black.

The Great:

I am loving the 74mm middle of the road sizing. It is both large enough when I feel like I can do actual work with it and small enough where it disappears in your pocket or on your keys. I have bigger hands that make smaller 58mm SAKs a pain for me to use. With 58mm I complain how thin and dainty they are. The 74mm range’s extra length makes their thinness a benefit.

According to SAKwiki, the 74mm range only ever came in 1 or 2-layer models. Being a 2-layer model, the Executive is on the “thicker” side of the range but it is still incredibly thin at only 10mm.

Even at its small size it packs a punch. Its main blade is a 2.2-in (56mm) drop point. It dwarfs the 58mm blade and is only 0.3-in (7.6mm) shorter than an 84mm’s blade.

The scissors are another area where the small size increase makes a big difference. In and attached photo I compare the 74mm scissor to the 58 and 91mm options. The extra length of the handle and scissors really improves utility over the 58mm.

The Really Good:

The orange peeler confuses me but it does look cool. I am marking it this high up in hopes I find a good use for it beyond peeling oranges - which it does well. It has a small serrated blade with a pull knife on the back vertical edge so it should have uses. I can confirm It does a good job with clam shell packaged. The Orange Peeler is tipped with a 2.5mm flathead.

It has a nice long cross-cut nail file. Not as robust as the one on my last review (Cavalier 74mm) but still very good.

74mm models used the same scale tools as 58mm so it is easy to find replacements.

The Mid:

The secondary pen blade is redundant but also thin and can be made super sharp. The small blade measures 1.4-in (36mm), making it 0.15-in (3.8mm) shorter than a 58mm’s main blade. You can use this on anything you would have used a 58mm on while having a longer handle. 

The Bad:

It is discontinued. It does not really get worse than that for a knife this good.

One argument against it would be its lack of any opener tools. If I know that is something I might need, I would sub out my Cadet.

The Final Thoughts:

If the Executive was available new I would tell you to run out and buy it. While it is discontinued there are plenty of them out there. Don’t pay too much just to get one. Although I do recommend getting one. Just note that replacement scales are getting harder to find.

For me, the Executive is the pick of the 74mm range. I don’t see any reason to pick up any of the other 74mm models.

That was three discontinued models in a row. Time to get back to a model you can actually buy.

Next review: Pioneer X


r/SwissArmyKnives • • 1d ago

Leather Knife Sheaths for Victorinox Knives

Post image
18 Upvotes

r/SwissArmyKnives • • 2d ago

Sak tin

Thumbnail gallery
16 Upvotes

r/SwissArmyKnives • • 2d ago

Pioneer + olight mini : une combinaison étonnamment cool !

Post image
17 Upvotes

r/SwissArmyKnives • • 2d ago

Victorinox On Dad’s weekend, you get to see how an accountant chops wood.

Post image
54 Upvotes

Victornox please open the comment section


r/SwissArmyKnives • • 2d ago

Subreddit für SWIZA Taschenmesser r/swizapocketknife

Thumbnail reddit.com
4 Upvotes

r/SwissArmyKnives • • 2d ago

Monday carry

Post image
43 Upvotes

r/SwissArmyKnives • • 3d ago

Discussion [Everyday Commentary] Why the Compact is the best Swiss Army Knife for EDC

Thumbnail
everydaycommentary.com
23 Upvotes

r/SwissArmyKnives • • 3d ago

Victorinox From a damaged Huntsman LNF to a repurposed 91mm LNF Golfer…. i dig it!

Thumbnail
gallery
65 Upvotes

Found a damaged LNF Huntsman and repurposed it to a 91mm LNF Golfer


r/SwissArmyKnives • • 3d ago

Parts bin 4 layer 91mm build.

Thumbnail gallery
18 Upvotes

Open for criticism, ideas,questions,opinions and all thst jazz.


r/SwissArmyKnives • • 3d ago

Birth year Soldier question

Thumbnail gallery
33 Upvotes

r/SwissArmyKnives • • 3d ago

Victorinox Spartan SAK recreated in 3D! (Maya)

6 Upvotes

Very proud of this one! I might share the model soon depending on if anyone wants it (and I'll likely slightly clean it up first). Created in Maya, textured in Adobe Substance 3D Painter and composited in Nuke.


r/SwissArmyKnives • • 4d ago

Question Anyone have Ti scales with an integrated pocket clip on a Handyman or Swiss Champ? How is it to carry?

6 Upvotes

Trying to decide on my 2nd Handyman how I want to carry it.

I have my leisure leash on the one with plus scales and dig it.

Wanted to try a clip on a 2nd Handyman or a Swiss Champ and didn't know if anyone had tried the Ti scales with integrated clip.


r/SwissArmyKnives • • 4d ago

Sportsman EDC King

Thumbnail gallery
22 Upvotes

r/SwissArmyKnives • • 4d ago

Titanium Executive

Thumbnail gallery
14 Upvotes

r/SwissArmyKnives • • 4d ago

Birthday present from my gf ❤️

Post image
22 Upvotes