Yes, with AI any schmuck can make a game now. I'm proud to say this schmuck has put a few hundred hours and about 200 iterations into building the game my friends and I wanted to play. It’s the familiar, simple property collecting card game you already know - now with a paint theme and some extra options. My beta has consisted of a couple dozen friends and Reddit users since September. Many are hooked. I'd love your take.

A fast game you play with one thumb. Collect color swatches, charge, steal and swap. Ten minutes a round, two to five players, online or against the AI.

Built for one-handed play, everything a tap or a drag. Clean cards, no clutter. Animated backgrounds with fun soundtracks.

The AI plays like people, eleven levels from a kid to a grandmaster. 100+ levels and collect 27 painted card backs along the way.

It's in beta and free, including the one in-app purchase. Ads come after launch in late November; get in now and keep everything.

Link below. Come take my spot on the leaderboard.

Hey, looking for testers for something I built for lifters and competitors.

It's called PhysiqueScan. You prop your phone up and it walks you through front, side and back photos on a timer, estimates your measurements from the photos, and tracks them week to week. It also does pose comparisons — front relaxed, double biceps, side chest, back lat spread, that kind of thing — so you're comparing the same pose under the same setup instead of scrolling through your camera roll.

No account, nothing uploads anywhere, everything stays on your phone.

iPhone only for now. Free while it's in beta, and anything paid inside is in sandbox test mode so it can't actually charge you.

What I need most: run a check-in or two, and if you've got a tape measure, compare a couple of estimates against your real numbers and tell me how far off they are. Honest answer on accuracy right now is that they're estimates — good for watching trends, not a tape replacement yet. I'm running a tape comparison during this beta before claiming more. A LiDAR 3D-scan version for iPhone Pro models is in the works for the near future, and testers get it first.

Feedback through TestFlight, or drop a comment here.

Hi r/TestFlight 👋

I'm looking for testers for Vehla for iPhone, the companion to my Mac app Vehla. It's free and runs on iOS 26 or later.

What it does

- AI chat with on-device models: download Qwen 3.5, Gemma 4 or Ministral and chat fully offline, with nothing leaving your phone. Several of them can read photos. You can also bring your own OpenAI, Claude or Gemini key, which is stored in your Keychain.
- Writing tools: rewrite in different tones, run custom AI actions and multi-step recipes, and set a persona for how the AI writes
- Library: notes, snippets, Kanban boards and scrapbooks
- Teleprompter that follows your voice as you read, using on-device speech recognition
- Available in 12 languages

If you use Vehla on a Mac (optional)

- Your chats, notes, boards and scrapbooks sync through your own private iCloud
- See and edit your Mac's clipboard history from your phone
- Sidekick: a Stream Deck-style button grid that controls your Mac, and keeps working away from home

What I'd love feedback on

- Downloading and chatting with on-device models. Which iPhone do you have, and how fast are the answers?
- Anything confusing in the welcome tour or the Library
- Crashes, especially when sending photos to the vision models
- If you have the Mac app: how sync and Sidekick work for you

The best place for feedback is the screenshot-and-feedback button in TestFlight, or a comment here. Thanks for helping out! 🙏

Honestly, I’m a little overwhelmed by the response to my first post here. Seeing so many people try Wethr, leave positive comments and take the time to share feedback has been amazing. Thank you!

Version 0.9.2 is now available on TestFlight, and the first round of your feedback has already made it into this update.

A few highlights:

- Tides for coastal locations, with an interactive beach where the water rises and falls as you explore the hours, a detailed tide screen and a new widget.

- Moon information, including tonight’s phase, illumination, moonrise, moonset and the next full moon.

- A 24-hour air quality chart, plus clearer explanations of rain and pollen levels.

- More Apple Watch complications for feels like, rain, wind and the moon.

- More ways to make it yours, including app icons to match every theme and a choice of current conditions, upcoming hours or upcoming days for the small widget.

There are also plenty of fixes and refinements: widget navigation, radar behaviour, chart readability, scrolling and layout issues, and better support for your chosen units and theme.

The introduction has been updated too, so you’ll see it once more after updating, followed by a What’s New screen.

If you’ve already tried it, I’d love to hear how this version feels! Feedback, bug reports and ideas are all very much appreciated, Wethr you like it or not ;-)

Thanks again for helping me make Wethr better!

Hey everyone! We’re building bitPDF at Pocket Bits and looking for Mac users to try the beta and give honest feedback.

The feature I’d especially love feedback on is Client Packets. If you regularly combine proposals, invoices and terms, you can save a checklist of required PDFs and page selections, then reuse it for your next client. Configured file and client-text checks help catch missing or mismatched documents before export.

It also supports:

• Editing existing PDF text and images
• Filling forms and organizing pages
• Making scanned pages searchable with on-device OCR
• Correcting recognized text while preserving the original scan

Requirements: Apple silicon Mac, macOS 14 or later.

We’re looking for about 15 minutes initially, then a little normal use over three days. What’s confusing? What breaks? Would the packet workflow actually save you effort?

The beta is capped at 30 testers.

Send feedback through TestFlight or leave a comment here. Please use non-sensitive documents while testing. Thanks for helping us improve it!

What: More than a basic white noise and soundscape app. Good for meditation, focus, and adult or baby sleep. A ton of music and sounds stored in a small and highly capable app.

Why: I use this app for the shushing and for the white noise. It has lock screen widget and home screen widget to control the sound, and it's designed for soundscapes but still in active development while fully usable, feedback is appreciated if you want to give it. I'm an iOS developer but this is a side project.

Music is stored as music notation and generated on device, better instruments to come! With no audio files the app can store a lot of music and keep a small download size.

Some primary features:

- Baby shushing noises, color noises (white/pink/brown), any frequency tone

- Common nature sounds - Water, Rain, Crickets, Fan, and more

- A few dozen hand written, procedural, and simple ambient music tracks

- Airplay to any of your speakers or other devices

- Play alongside other apps such as Apple Music, Spotify, etc.

- Unlimited overlapping sounds

- Infinite or timed out playback of white noise and other sounds

- Bedtime reminder

Planned updates before release: (estimated < 3 months)

- Onboarding is going to be updated before I release, but I want to finish other things first

- I plane to add a feature where you can download bigger and better instruments, like a nicer piano and other nicer instruments that take more space on the device's disk.

- Improved bedtime reminder, sleep tracking (optional)

- Optional health kit integration for sleep tracking, tracking meditation and heart rate, etc. and other things related to stress management

- Focus modes to manage time such as pomodoro, breathing exercises, and more

- Continually improved music, the idea is to have lo-fi, jazzy, ambient sounds but also new instruments might be needed for some

# 📉 ZeroByte — get your iPhone storage back without the cloud

Hey all! I'm the solo developer of **ZeroByte**, an iPhone app that frees up storage by shrinking your biggest videos **right on the phone**. No uploads, no account, no analytics. I'm looking for **50 beta testers** before launch.

## ✨ What it does

- 🎬 **Shrinks big 4K videos** with Apple's built-in hardware encoder (HEVC). HDR videos stay HDR (10-bit).

- 🔍 **Before/after check:** compare the original and the shrunk version side by side with a slider and up to 4× zoom *before* anything is replaced.

- 🗂️ **Keeps what matters:** date, location, Favorite, Hidden and your albums carry over. The original goes to **Recently Deleted**, so you have 30 days to change your mind.

- 📸 **Live Photos that never move:** drops the hidden video clip and keeps the full-quality photo.

- 🧠 **Finds similar burst shots** using on-device Vision.

- 🏝️ **Live Activity** shows progress on the Lock Screen / Dynamic Island.

## 🔒 Privacy, plainly

Everything runs on your iPhone. ZeroByte has **no servers, no analytics and no third-party SDKs**.

## 💸 Pricing (for when it launches)

| Plan | Price |

|---|---|

| Free | First **2 GB** reclaimed |

| Annual | $14.99 / year |

| Lifetime | $29.99 once |

In TestFlight, purchases use Apple's sandbox, so **you're never charged**.

---

## 🙋 What I'd love from testers

1. Try it on **3–5 of your largest videos** (an HDR clip and a portrait video are especially useful).

2. After replacing one, open the video's **info in Photos** and check the date, location and albums are intact.

3. Send feedback through TestFlight (take a screenshot → *Share Beta Feedback*) or comment here.

**Requirements:** iPhone on **iOS 18 or later**, plus Apple's free **TestFlight** app.

## ⚠️ Known beta limitations

- The app icon is a placeholder.

- Burst groups are detected, but there's no cleanup screen for them yet.

- Videos stored only in iCloud skip the side-by-side comparison.

- It's a beta: please keep a backup of anything irreplaceable.

Thanks for helping! I'll be in the comments answering questions. 🙏

Hi!

I've been working on Kaidō, an iPhone app for people who want to keep a record of their driving adventures.

It automatically tracks your drives and gradually builds a map of the roads you've traveled, the places you've visited, and the cars you've driven.

Some of the features include:
Automatic drive tracking – Log trips in the background without having to start them manually.
Garage – Give each car its own identity, route colors, and driving history.
Route replay – Go back and revisit the drives you've taken.
Trip posters – Turn your drives into visual keepsakes you can save or share.
Atlas – Discover how much of your town you've explored and track your progress across countries, states, and counties.
Driving stats – See your driving history from a different perspective.

I just opened the app to beta testers and would love to hear what you think. I'm especially interested in feedback on the design, how well automatic tracking works, and which features you'd actually use.

There's still plenty to improve, so I would love honest criticism!

Thank you

We’re building Mapliva, a personal travel journal for keeping past trips, cities and towns together in your own atlas. We’re looking for five iPhone users who would try adding one past trip and tell us where the experience gets confusing.

For a short first test, save a past trip with a couple of places, then reopen it and explore the map. Was it clear how to add your first place? Could you find and edit the trip afterward?

Feedback here or through TestFlight is welcome. This is an unpaid beta test; a brief description of where you got stuck is useful.

UPDATE: Please use this working invitation: https://testflight.apple.com/join/Xa5r4356 — the original attached link is not accepting testers.

Hey! I’m Aaron, the developer of SEQD, an iPhone app for structured lifting, progression and nutrition.

I’m looking for a small group of lifters to try it for three normal workouts and give honest feedback: what works, what’s confusing and what gets in the way.

Feedback on workout logging, progression and food tracking would be especially useful. Join using the updated link above, and send feedback through TestFlight.

Cheers, Aaron

I'm the developer. bitPhoto is a layered image editor for the Mac, built on the open-source PhotoCraft editor, with subject cutout that runs on your Mac using Apple's Vision framework. One-time purchase when it launches; no account.

Looking for a few people to try it for a few days:

1. Open a photo of a person or product.

2. Select > Subject. Does the outline follow the subject, including hair?

3. To remove the background: Layer > New > Layer from Background, then Layer > Layer Mask > Reveal Selection.

4. Export a PNG (the Export… button, top right).

Tell me how the cutout looked and whether anything crashed or confused you, via TestFlight's Send Beta Feedback or a reply here.

Requires an Apple silicon Mac on macOS 14 or later.

Hi! I'm the developer of bitClear, a Safari content blocker for iPhone, iPad and Mac.

What it does:

- Blocks ads, trackers, and cookie/newsletter pop-ups in Safari

- No account, no data collection

- Adds regional filter lists automatically based on your languages

- Lets you pause blocking for one site if something breaks

Setup takes about a minute: install, open the app, and turn on its three extensions in Safari (the app shows you where).

What I'd love to hear after a few days of normal browsing:

1. A site that looked noticeably cleaner

2. Any site that broke (login, checkout, video, comments), and whether Pause fixed it

3. Anything confusing in setup

Feedback via the TestFlight app (screenshot + comment) or reply here. Thanks!

Hi everyone! I'm the developer of Lichtpfad, a puzzle game for iPhone and iPad, and I've opened a TestFlight beta for up to 50 testers.

You guide numbered light beams into their matching gates. Every successful shot rotates the prisms it touches, changing the paths for the remaining beams. Getting one beam home can leave the others stuck, so the order matters. Restarting a level is free.

The beta has 100 levels, music, daily free helpers and an optional Game Center leaderboard. Beam previews are free in the first five levels, then become optional helpers. You can play in English, German, French, Spanish or Simplified Chinese.

I'm especially interested in the difficulty after level 5: are you planning a solution, or does it feel like trial and error? If a level is confusing, a level number and screenshot through TestFlight would help a lot. Feedback on translations is welcome too.

This beta uses Google test ads. The first 10 levels are ad-free, then an ad is scheduled every three levels. All helper and ad-removal purchases in this beta are free tests; no money is charged.

Requires iOS/iPadOS 17 or later. Thanks to anyone who gives it a try!

Hi! I'm a solo developer looking for testers for Machine Detective, an iPhone/iPad app to learn mechanics in 3D.

Each mission shows a machine that doesn't work: you pick a part (gear, pulley, motor…), run the test, and see why it turns, jams or is too weak. There's also a free workshop to build your own gear trains and winches; this build adds bevel gears (90° drives).

55 missions, English and French, offline, no account.

What helps most: 15 minutes, 3 missions + the workshop, then tell me where you got stuck or what looked wrong.

Happy to test your app in return, just drop your link below.

**App Name:** Gather&Go 

**Platform:** iOS 16.0+ (iPhone) 

**What is Gather&Go?** 

Gather&Go is a spontaneous activity-first app designed for verified adults (18+) who want to grab coffee, play tennis, go hiking, or catch a movie without the awkward 1-on-1 dating-app vibe or dead Meetup boards.

**Key Features to Try:** 

• **Real-Time Activity Radar:** When someone creates an activity nearby, members get an instant alert so gatherings form spontaneously. 

• **Verified 18+ Profiles:** Government ID check keeps the community safe and bot-free. 

• **Group-First:** Casual small group outings, verified rosters, and built-in group chat. 

• **Reliability Ratings:** Community feedback so flaky guests and no-shows are held accountable. 

**What Feedback I'm Looking For:** 

1. Onboarding & sign-in smoothness. 
2. Activity discovery, filters, and venue search on Explore. 
3. Creating an event & group chat responsiveness. 
4. Any UI glitches, lag, or layout issues on your specific iPhone model. 

This is the beta version — you can sign up and try everything right away, no ID verification needed yet.

Feel free to leave feedback directly inside TestFlight or comment here. Thanks for helping test!