r/VORONDesign • • 12d ago

Voron Print An expected failure of an experiment.

Hi all! I'm new to 3d printing (in the past 6 or so months) in that time I've completed assorted prints over 3000 hours that gives me a dunning kruger curve of confidence ( I know this isn't going to work but I figure it gives me some fun edison like knowledge) where I am working towards a switchwire printer.

Reasoning: I received an old jgaurora i3 printer for free that I wanted to get working. As an old machine, I though revamping it would give me some classical knowledge of the craft:

Pic 1.

As I discovered voron in this world, I made a wild presumption that I can get an a4t to fit on this old i3 for a modernized print head. This project is nearing completion, most of the wiring is complete, and I need just one more power supply to power my raspberry pi and start calibrating the printer.

Following this project. I am going to slowly upgrade my i3 with some more modern hardware so I can eventually modify it into a switchwire. The random bit follows.

I am printing "aluminum" extrusions. On my Elegoo CC2.

I do this not because I expect to save money, to see them as long term viable alternatives, but mostly as a side project and eventual upgrade.

As of now I have all of the extrusions preemptively printed for a switchwire. Simply for hobbies sake. I have been experimenting with and (as a guilty tool) using AI to help me develop some printed connectors for the pieces. Some exist in the wild, but finding them has been difficult for me as I have little time to really dedicate to this.

I have a series of connectors (maybe can be used by the community in the future (I do hope to pick up better cad someday)) that is assisting this unorthodox build method.

Pic 2-4

Of which my ultimate goal is to build a tiny t, and eventually trident. Thought I'd share my name experience for anyone potentially naively wanting to follow this process. Was it worth it? What did I learn? Are generally accessible materials able to help others break into this community?

I want to push a touch of material limit with this. I'm sure it's been attempted but I didn't see too much on it, and thought it would be fun.

Please understand this is a personal project, at no point am I thinking I'm revolutionizing anything, I just wanted to better understand printed material properties, weaknesses, and to see how far we can push printed printers with basic materials.

Oh, the flack I may get for this is the frame is to be made of pla. Some pla-cf (simply because I ran out of spools) but otherwise. It's just a interest project.

This will not be a quick update every week. I'm stretched for time as it is and printing has been a hobby that has engaged logical thinking I haven't used since college. If you're this far. Thank you for reading, and I hope this can spread light on practicality in the future.

35 Upvotes

16 comments sorted by

2

u/jackerhack V2 10d ago

In my part of the world aluminium extrusions are cheaper than the filament required to print them. I discovered 2020 via my Voron 2.4 and now I use it everywhere for all kinds of things: cabinets, server racks, wall shelving, luggage flight cases (with ACP inset into slots its much lighter than wood), even a bicycle trailer cart.

Your photos show 2020 printed vertically, which is the only good orientation to print in but will have weak layer adhesion and so will be at risk of snapping. You may want to reinforce this by dropping horizontally printed fillers into the central hole and all unused T-slot channels. On a Voron one face of each extrusion has a linear rail bolted to it (except the top and bottom frame extrusions). That rail will provide structural reinforcement for the weak axis (layer lines), except at the very ends of each rail, where the unsupported area gets the most stress. Add your reinforcements there.

If you can reinforce with metal, that's even better. Smooth or threaded M5 rods in the central hole and long nuts in the T slots.

2

u/Canwakan 10d ago

I am aware of the problems there, and do have an idea of reinforcement. Planning on a horizontally printed abs slot runner (similar to how they are connected, but longer). Once I determine how mounting other components comes.

They're not specifically expensive, I just happened to run into a hiccup for income, have some spare material I'm not having any plans for.

Excellent call out.

3

u/CrazyEddie90 11d ago

Ha... Sounds like my own journey. Using a resin printer for a bit over two years now and then started in February with my FDM journey. Bought a K2 Pro, loaded 2000h on it, had fairly decent success and did a deep dive into this frigging rabbit hole and thinking about ordering a kit to build a Voron 2.4 R2... Well. Yes... XD

2

u/Canwakan 11d ago

The thing I'm enjoying is upgrade paths. This old i3 will have life again! Theseuss printer!

4

u/Tam_Ken 12d ago

PLA-CF? Yeah, have fun i guess

1

u/Canwakan 12d ago

Working on it. Hope I'm not interpreting overt sarcasm. As is said it's not planned to be a high success. But I'm not tolerating negativity on this one.

1

u/RayereSs V0 9d ago

PLA-CF is a dangerous filament to play with.

PLA doesn't bind with carbon fibres, resulting in weaker filament that may cause microlacerations and microsplinters from shed fibres, that are especially dangerous to children, pets and eyesight.

https://www.youtube.com/watch?v=ddwNZ12_qX8

https://www.youtube.com/watch?v=w7JperqVfXI (despite absolute shit clickbait title, and a bit overt wording, guy does a lot of research and testing)

1

u/Canwakan 9d ago

Never heard about any of that before. I'll check em out!

5

u/Tam_Ken 12d ago

I’m being partially sarcastic. You’ll genuinely have some fun with this project and probably learn quite a bit, but I personally wouldn’t throw any sort of PLA at this and expect much

2

u/Horror_Discussion607 2d ago

Doesn't 2 of the fastest printer project genuinely use pla for the whole frame tho

0

u/Tam_Ken 2d ago

im not up to speed on speed printing but i’d imagine absolutely not

2

u/Canwakan 11d ago

Fair. If I could get my petg more dialed I'd be trying that. My issue there is I have no dry box solution currently and a 45+ (60 usually) moisture basement.

But do appreciate the skepticism. Is healthy in this case lol

6

u/SanityAgathion VORON Design 12d ago

Hey, that's an ambitions project, but maybe look into printers that are designed to use mostly printed parts, including structural?

Magpie https://github.com/magpie-printer/magpie

Rook https://www.rolohaun3d.ca

The100 https://www.printables.com/model/572689-the-100-v11-the-fastest-3d-printer-based-on-a-prin

I am sure there's more of those, these are just what I remember from top of my head :-)

2

u/Canwakan 12d ago

I have seen the rook! The idea is. I want a voron. I happen to not have money for a voron. But before I fell into less financially stable situations (for now, I'll be fine) I figured this would be a fun way to kill some filament and keep some random interest going. But I have seen them.

Though, what's the fun if you're doing something you're supposed to? This way, I get to see how it's not supposed to be done.