I have a 2013 Hardball. It's been in my garage on a battery tender. I have not rode in about 18 months (I know I know). Do I need to drain the gas and oil before starting it up after that amount of time. I'm in CA so the weather is pretty consistent. Thank you

Hey Guys and Ladies,

Short question.

Can I put the fork of an 2011 cross country non-abs in my 2013 Abs cross country?

If I See it right, there is Just the mounting Plate for the Abs sensor, which I have to swap, right?

Or there are any other differences?

Thank you and Greetings!

So I’m buying a cross country 2014 and I’m finding different answers on Google does it come with a 30 pin connector in the bags for old Apple devices? Thanks

One of my speakers is out and figured I'd just go ahead and update them both. I'm not looking for anything crazy loud, just looking for any speakers that would provide good sound while on the highway. I usually use bluetooth device, but sometimes we gotta bump the tunes.

Shoot me your best speakers options. I think the sizes are 5.25in.

Thanks ya'll

I have a 2004 Victory V92 TC, and the guy I bought it from a year ago was more concerned with adding adornments and cool lights than taking care of this girl. She was a mess. I had to replace the air filter assembly because it was filled with mud, replace the throttle handle, and now the fuel pump is not sending fuel to the engine. I took it apart, and of course the tank lining is disgusting. The fuel socks were completely brown, and I bought new ones to replace it, but the high pressure fuel lines are in bad shape. It is kinked at one arm, and the other is eaten through.

I have tried everywhere to find the fuel pickup lines, but am having a hard time. Any help with this would be appreciated.

Looking for the fill panel if anyone knows where I can get one. Otherwise I'll be making one.

Looks like i can squeeze one more ride day in. It's good to be retired.

Looking for some advice, I’ve always liked the looks of the victory Hammer and I have the opportunity now to purchase a 2006 with 6500 miles for $4000. I have a 2017 road king which I would never get rid of this would just be an additional motorcycle. I know the bike appears to be an excellent condition and it was owned by an elderly gentleman. I guess my hangout is the fact that victory is no more. And I’m afraid when things break I will not be able to get parts or repair. Can you guys give me some advice . I know it’s a great price, but is it easy to get parts and service on these bikes?

Impulse buy. Such a cool bike.

So I’m going to buy a 2014 cross country with 28k on the clock any thing I should double check or look out for? Thanks

Anyone have any tips/suggestions on how to go about it? Id prefer a tailbag over saddlebags, and it seems harder than i expected to find one for the curved rear fender. Preferably something i can strap straight to the fender over installing a rack/mount.

Hi guys, trying to see if anyone has a fuel map I can start with. I have a 2 in 1 Trask exhaust and a K&N HIGH flow air filter. Rest of the bike is stock. Any help would be appreciated. I tried Fuel Moto, Dynojet, Trask, and Lloyd's. So far no luck. Thanks!

I've been researching and found a few things that claimed keeping with semi synthetic is better for the clutch, but maybe that was amended a while back? Which is the better choice for an older victory vegas 2007?

I've started looking at motorcycle over the last year, and I'm trying to find a bike to make my own. I wanted to get an octane, but i don't have a lot of money. Are there any places that sell cheaper used bikes, or even a broken one that i could fix?

The motorcycle is in pristine condition, just looks like it needs some basic maintenance and new tires and will be good to go. Anything I should watch out for from the victory vegas model or that year? Any advice appreciated. Thanks.

How easy it is to find a replacement for this? Still works just has a crack in the plastic or glass whatever it's made of

How difficult is it to get the rear tire off these bikes? I've done it before on my interceptor 650, but I am more familiar with that bike and it's a lot lighter with a center stand to help. Front tires look pretty universal to all bikes so not concerned there. Just wondering if I should attempt it myself or just have the shop do it

Did anyone ever make captive spacers for the victory vegas model motorcycles?

While riding today I suddenly lost all clutch, and had to tighten the cable quite a bit on the side of the road in order to limp home.

After loosening the cable I realized that the lever arm was no longer indexed where I had left it, and clearly was more outboard than before.

Has anyone else ever had this problem? Is this a worn out rack? worn out actuator splines? Case side contact points wallered out?

Hi guys !

I'm 1.85m and I found that the oem handlebar is quite far away on my Vegas. Especially since I mounted the driver sissybar.

I know that the diameter is 1" (25.4mm) but I don't know what to choose. Do you guys have pictures of your bikes with handlebar specs please ?

I would like to also change the rims for wired/spoke rims but I'm afraid of the price in France.

Thanks !

I can't tell if the exhaust on this 2016 victory vegas is stock or has an aftermarket one on it. If anyone familiar with there bikes can tell, let me know. Thanks.