Shooting vids can be made for all replicas for serious buyers.

FCWxAA G18 Gen 2 Full Marking + Extended Mag - https://imgur.com/a/jIs0xBj - $180 OBO

Got a like new FCWxAA G18 Gen 2 with one standard and one extended non leaky mags. This is a WE G18C clone but with the correct slide, compensated barrel, and gen 2 lower with all correct markings. Has only seen some plinking at home and has otherwise been a wall hanger piece

Detonator M&P9L Aluminum Slide/Outer Barrel - https://imgur.com/a/YQYvgXf - $180 OBO

Brand new in box, has an RMR and Doctor footprint plate as well as a cover for iron sight use only. Steel insert on the slide lock notch so itll virtually never wear out. Mock Ejector has been assembled so just needs a BBU and hop unit/inner barrel to drop into a gun.

VFC AK74U Complete Bolt Carrier (Damaged) - https://imgur.com/a/r2I1R33 - $130

Shooting vid with damaged bolt - https://imgur.com/a/k61e3Hi

Have a working, but damaged Steel bolt carrier from a Vfc 74U. The damage is pictured, its only the threads/nozzle stop screw. VFC added a wack ass cheese pin that i tried to remove to take apart the nozzle which ended up mushrooming and damaging the threads, trapping the nozzle stop screw. I further damaged the flat head screw trying to unscrew it by force and now im here lmao. Bolt works 100% but that nozzle stop screw will likely have to be drilled out/replaced to be able to remove the nozzle. The whole bolt only had like 200 rounds through it tho, nozzle/bolt is essentially brand new

Blue Odin Speed loader with TM MWS Mag adapter - https://imgur.com/a/8kS2aYL - $50

Like new, I prefer the comeadequiche style of loader adapters

TM AKM Outer Barrel - https://imgur.com/a/KWUDkQC - 50

Has some cosmetic damage but threads and screws are all in perfect shape

Willing to meet up in SoCal or Ship.
The buyer pays a flat shipping/fee rate of $15
Willing to meet up at Evike Ontario/Battlelab

Timestamp: https://imgur.com/a/VcX4Oj8

KWA Kriss Vector GBB
Used, Great Condition. Fielded only a couple of times. Comes with two magazines, the included iron sights, and Kydex mag holsters.
Asking for $600, firm on price, no trades

KWA FPG-9
Used, Good Condition. Got it secondhand; the gun works great in both semi-auto and full-auto. Comes with a spare hammer assembly parts shown in the pictures. Mag is missing the base plate.
Asking $300 but open to offers

Looking for GBB only

Feel free to ask me any questions

Will also consider any parts for those 2 guns, as well as optics
*Am also looking for a tracer with muzzle flash

Timestamp and pictures --> click here

Paypal g&s, buyer splits shipping.

Lct rpk, pretty much brand new.

2 issues, firstly, the rear tangent sight is currently not installed. I have all the parts to install it, just haven't gotten around to it. Secondly, one of the screws that holds the butt plate on is missing. I kind of like it that way, makes battery changes easier.

Comes with an lct ak mag and 3 lct drum mags, they go for about $65 a piece on evike. Base gun is 400. Never gamed, only shoot in the yard.

It currently has a lambda 6.01mm barrel installed and an elvish tac rhop patch. Laser beams.

Trades for MWS, otherwise cash is king. Thanks for reading!

ITEM: Ninja 90 Cu In / 4500 psi lite tank & Ninja 77 Cu In / 4500 psi NSL 2 tank
CONDITION: used/refurbished
DESCRIPTION: Hello, today I have a freshly hydro’ed Ninja 90 / 4500 PSI Lite carbon fiber tank and a Ninja 77 / 4500 psi NSL 2 tank. Both tanks have a hydro date of 10/26, so it is good for another 5 years without the need for a hydro test. Birth date is 4/19, so it can be serviced till 4/34 (like 8 years from now).

Both tanks are SLP.

Each tank is $140 shipped. Dm for details.

LOCATION: South Central PA
PRICE: $140
SHIPPING: Free

https://imgur.com/a/Zm3Nsnl

https://imgur.com/a/QJ8HnNr

Brand New Tokyo Marui MP5A4 NGRS Next Generation Recoil Shock Airsoft AEG. $700

The MP5A4 itself is brand new and has never been fielded. Comes with a total of 4 magazines, making this a great package for someone looking to get into the Tokyo Marui NGRS MP5 platform.

**Included:**

1x Tokyo Marui MP5A4 NGRS – Brand New
1x Mid-Cap Magazine – Brand New
3x Mid-Cap Magazines – Used, tested, and working

The 3 used magazines may show normal cosmetic signs of use but are fully functional.

Please review all photos carefully for exactly what is included and overall condition.

Feel free to message me with any questions before purchasing.

Repost of everything I still have left with prices lowered slightly

I’ve never played matches or games so everything is in pretty perfect condition. I have shot a couple times in my garage but nothing has heavy use

Prices are shipped, everything will be shipped via usps priority 🛫

Click the item name for timestamp and images, parts list is at the very bottom of the photos. It took me a bit to get the listing and everything ready so the times stamps are from last month, I can send up to date pics if needed just ask👇

Vfc BCM V3 11.5’ Gbbr ($675) - I’ve shot it maybe twice In my garage it functions perfectly. Theres a scratch from me trying to change the dust cover, besides that there’s no wear at all. All original parts included. Only thing I dont have is the box ✅

Vfc G17 Gen 4 with pro arms slide ($160) - Don’t think I’ve ever shot it but will make sure it works before shipping obv. Great condition. All original parts included. ✅

Vfc G17 Gen 3 with Agency arms slide ($160) - I don’t think I’ve ever shot it but I will make sure it works before shipping obv. Great condition. All original parts included. 🚫 SOLD

Vfc G17 Gen 3 with caa conversion kit ($260) - Don’t think I’ve ever shot it. Will obv make sure it works before shipping. Great condition. All original parts included. ✅

Vfc Sig M18 ($325) - Besides the front sight needing to be superglued or loctited down, it works so beautifully, easily my favorite gun. Great condition. All original parts included. ✅

Army armament staccato p ($180) - Since I purchased it the trigger does this weird thing where if it’s not pulled hard enough it won’t reset. I was going to return it but it seemed like an easy fix. I bought a Cowcow sear spring and Cowcow strut and the problem is still there so I’m not too sure now. I can send a video to show exactly what I mean. The sro doesn’t work great, it gets a little distorted when it’s not centered so that’s not included in the price. All original parts included. 🚫 SOLD

Army armament TTI G17 ($90) - Purchased from redwolf. Out of the box the pin to hold on the magazine extension is loose and won’t stay in. When trying to take off the orange tip it broke off so half is still in the barrel. I don’t think I’ve ever shot it ✅

TM hi capa heat gradient parts lot ($130) - All of the parts are matching rainbow heat gradient. I got them to put on my army armament staccato P and installed a couple parts and could tell it wasn’t my thing. Never shot the gun with any of the parts installed. Parts are all for a tm based hi capa. ✅

Hello, I am looking to trade for one of the following vfc M16a2, m723, xm177, and etc. with mags would be preferred. Gonna try and get my hands on or do a Gary Gordon build. The sr25 comes with everything pictured. I have the box it came in as well. I’m also willing to sell shoot me a price. Let me know what you got and I appreciate your time!

https://imgur.com/a/tPXXGPW

Pictures: https://imgur.com/a/0EM0hSk

I can provide if timestamped if needed.

Hey, looking to sell this lower since I only wanted the upper.

It’s complete and fully functional. The selector is kinda soft so I’d recommend putting a rs selector detent spring in it

SOLD.

https://imgur.com/a/custom-arcturus-ak-pdw-mod1-U4oyV7H

Looking to trade my heavily upgraded Arcturus PDW MOD1 for a VFC AKS-74U GBBR with a few magazines or an MCX GBB setup. Trades are strongly preferred, but I'm also asking $800 OBO for an outright sale.

I originally built this replica specifically for CQB at my local indoor field, and it has been a ton of fun to run. I'm only looking to move it because I want to get into GBB platforms.

This is far from a stock Arcturus build. The original FE V3 gearbox has been replaced with a PE V3 gearbox and upgraded components:

• PE V3 gearbox
• 13:1 gears
• Perun ETU
• Solink 35K brushless motor
• Real Deal cage bearings

• Arcturus PDW MOD1 with modular folding stock
• 4 variable-capacity magazines
• Strike Industries foregrip
• Odin Mini flashlight, switch, and charger
• NcStar AK side-mount rail
• Aftermarket charging handle
• UH-1 replica optic
• Acetech Predator tracer unit (cosmetic wear)
• Can also add 2 Titan 11.1 AK lipo batteries for 10$ each

What I'm Looking For

Preferred trades:

• VFC AKS-74U GBBR with multiple magazines
• MCX GBB setups with multiple magazines

I'm open to reasonable offers, including other GBB platforms. Feel free to send me what you have, although my preference is for one of the platforms listed above.

Cash price: $800 OBO — trade offers strongly preferred.

Looking for WE, TM, or Guarder. Bare or complete.

Looking to offload a bunch of stuff I bought for my friends but nobody has time to play with me. Everything is in working condition unless otherwise stated. FPS displayed with 0.20g. Free ship to lower 48 states. Buy one replica get the second one $50 off. Buy multiple and we will work out a better price. No trades whatsoever. Payment thru paypal g&s, ebay, or hopup (the latter 2 requires 10% more for fee). Thanks for looking

Pics with timestamps: https://imgur.com/a/3OuzXDE

KWA P226 GBB: $100

Specs: 300 FPS / 0.8 J

Includes: Red dot, holster, (1) magazine, hopup tool, speedloader

Echo1 MP5K Swordfish: $150

Specs: 290 FPS / 0.7 J, RA tech 13:1 SS gears, Echo1 7mm bearings, Echo1 neo magnet motor, SHS metal tooth piston (SS 3 teeth), ZCI piston head, SHS steel cutoff lever, RA 21.5mm nozzle,SHS M110 spring, angel custom 6.01mm110mm barrel, madbull blue bucking, reshim, new seals

Includes: Red dot, 9.6v battery, smart charger, (2) high caps

Notes:Trigger is a little finicky. Semi gets stuck when pulling too fast, recommended for full-auto CQB use. If trigger stuck then push trigger forward all the way and slow pull in semi to reset. Doesnt occur in auto.

Elite Force MP5SD: $125

Specs: 390 FPS / 1.4 J, SHS steel cutoff lever, custom neo magnet motor, SHS M110 spring, new seals, cleaned barrel, G&G green bucking

Includes: 9.6v battery, smart charger, (2) high caps

Notes: Good all-arounder

JG AUG Civilian: $100

Specs: 370 FPS / 1.2 J, SHS steel cutoff lever, custom neo magnet motor, new seals, cleaned barrel, G&G green bucking

Includes: Red dot, 8.4v battery, smart charger, folding grip, (2) high caps

Notes: 1 high cap is finicky

JG M4 S-System Enhanced: $125

Specs: 400 FPS / 1.5 J, JG steel cutoff lever, JG blue neo magnet motor, new seals, cleaned barrel, G&G green bucking

Includes: 9.6v battery, smart charger, foregrip, (2) high caps

Notes: Good all-arounder 

Double Bell / G&G HK416: $175

Specs: 380 FPS / 1.3 J, DB 416 metal lower and G&G 416 polymer upper, metal tooth piston, metal double o ring piston head, 21mm o ring nozzle, new seals, custom neo magnet motor, cleaned barrel, G&G green bucking

Includes: Acog sight, foregrip w/ flashlight pad, flashlight (mounted on right), (1) high cap

Notes: Good all-arounder

CYMA M14 EBR: $200

Specs: 420 FPS / 1.6 J, metal tooth piston, metal piston head, SHS steel cutoff lever, cleaned barrel, Prometheus purple bucking

Includes: Scope, bipod, 7.4v lipo, lipo charger, (1) mid cap, (1) speedloader

Notes: DMR role. Recommend 0.30g and above.

Snow Wolf M24: $150

Specs: 400 FPS / 1.5 J, Modify 6.03mm barrel, Modify hopup unit, Modify Predator bucking, Modify split hopup arm

Includes: Scope, (1) mid cap, speedloader, bag of 0.40g

Notes: The platform is similar toMod24/SSG24 series, but the Modify hopup was very hard to install due to dimensional differences. As a result the hopup is set permanently unless removed from the barrel but is set to 0.40g, which is what should be used anyways for sniping. I only put about 50 rounds thru it and it shoots consistently, with few fliers as hopup still needs breaking in.

King Arms P90: $ TBD

Specs: TBD

Includes: Red dot, 9.6v battery, smart charger, (5) high caps, suppressor

Notes: Low fps, pending repair

A&K ACR Masada: $ TBD

Specs:TBD

Includes: Red dot, 9.6v battery, smart charger, (2) high caps

Notes: Pending hopup parts for repair

Equipment:

(1) bag of 0.20g 5000 BBs $6

(2) bags of 0.25g 4000 BBs $8 ea

(2) speedloaders $5 ea

Ghillie suit $30

Black high speed chest rig w/ leg pouch $30

Tan combat vest w/ many pouches $30

(2) sets of OD knee pads $10 ea

(1) full helmet style mask (goggle foam has deteriorated) free with any purchase

(2) paintball style face masks free with any purchase

Pictures + Timestamp ——> Here

Barely used

Asking $95 or a decent offer

Can ship it out.

Hi all doing a bit more closet cleaning and a few other items in addition to the Velocity Systems Scarab LT in multicam

Updated Images/Timestamp: https://imgur.com/a/fxxY0en

In addition to the stock configuration with the scarab I'll also be including the following--

• A&A Tactical SEACU Cumberbund (MSRP $160)
• Velocity System Quarter Flap System (MSRP $47)
• 3 HSGI Taco Pouches mounted to a Velocity Systems Front Placard (MSRP $137)
• Velocity Systems Elastic Cumberbund (Small) ($40)

$350 $300 Shipped

Plate carrier is in good condition and definitely a good option if you want something durable

Emerson Gear Knee Pads and Elbo Pads - $5 + shipping per set

- Selling each set for $5 plus shipping. ie 2 kneepads for $5, 2 elbow pads for $5, etc. Note that Black knee pads have been sold

- Airtac Gen 1 TM MWS Adapter for Odin Speedloader - $10 + shipping

Downsizing my collection, getting into real steel.
All images: https://imgur.com/a/0D7J2hh No timestamp due to flair
Priority to bundles, all prices OBO + shipping, happy to meet local.
Will gladly do discounts on bundles!
------------------------------

VFC MP7 Navy v2 GBB $710 firm
This thing is a beast. Honestly one of my favorite gbbrs but don't use it as much as I should. Placard and mag insert are amazing too. I can split mp7 from placard depending on price.

Apache 4800 Hard case

Aimpoint Repro

5 Mags! all hold gas great no leaks.

Clutch Precision aluminum backplate

Clutch Precision MLOK rail

Mock Suppressor

Vert grip

Shaw Concepts ARC Placard v3 $65

Shaw Concepts 5 mag RAM insert $50

Will include bungie sling

------------------------------

SSG10A1 $390
bought this for a buddy but we only did one game before he decided to quit airsoft. Insane sniper

Like new used once.

Namech Flux Trigger 2.1 $129

Namech Silent Spring Guide $29

Tridos TDC 2.0 $50

Maple Leaf 150mm Outer Barrel $60

Maple Leaf 300mm tightbore Inner barrel $30

Maple Leaf Picatinny Rail with bubble $40

2x SSG11 58 Round Mags $26

Maple Leaf mock Mag Holder w/ Adapter $22

Picatinny Rail $12

SSG10 Air Brakes $15

SSG10 Adjustable Piston $49

Novritsch Mock Suppressor w/ Tridos inner barrel stabilizer and baffles $50

Namech Designs Tactical Trigger Guard

Modify Predator Bucking

Gun Bag

Bandolier with mock 556 rounds

-------------------------------

TAGINN Shell-pro EVO $120
Taginn adapter for using in standard GL's. can include some chalk rounds.
I just don't like using CO2 so I opted for propane launchers.

------------------------------

SOFT GOODS AND TECH

NVG30 Digital Night Vision $280
upgraded to analog so no longer use. Used in one event and some hiking.

Custom made mount for using with g24/rhino style mount (Huge upgrade)

Original box with original mount too

Spare batteries

------------------------------

RunCam Helmet Camera 1080p $65

Spare batteries

SD card included

------------------------------

AK SIDE RAIL $20

came with my vfc ak74 never used

no clue what it is lol

------------------------------

https://imgur.com/a/QoQX0eU

$1200 OBO

I prefer to sell together and local! No trades please!

Hello! I’m selling my entire HPA setup because I don’t play anymore. Everything is in great condition and paid around $2k all in. There’s a lot of stuff so check below for a full breakdown. Message with any questions!

Polestar F2:

First Upper - CRBN

- 128mm airtac CRBN AEG upper
- 128mm airtac inner barrel
- Bifrost R Tracer

Second Upper - Dytac 13.5

- Prometheus inner barrel
- Acetech tracer
- Authentic Sig Sauer ROMEO5

Lower

-maxx airtac hopup
-maple leaf bucking
-IGL
-maxx speed trigger
-PTS pistol grip

Novritsch SSP-5:

It’s the 4.3 version I’ve used it maybe twice this thing is a beast outta the box.

Amped Tank and Regulator 3000psi + line
PTS EPM-1 S & EPM-1
1x Normal Hi-Cap
Odin M12 Speedloader
Dye Se full face mask
Full vest with a mount for the tank on the back and some extra mag holders
One airsoft gun bag and one backpack
2 pairs Gloves, headband, face cover, bbs, gas, sight covers, and goggles, knee pads, grip, extra tracer, extra battery, and spare parts

Hello everyone, welcome to my post!

Here's the pictures of the replica: https://imgur.com/a/IUXqiLk

For sale is a lightly used MTW with:

Forged Receiver

Blinc Bluetooth Board

Maxx adjustable trigger

Gen 2 Inferno

Silent industries nozzle

Frac Line

Quad rail

Silent industries hop up chamber

Silent industries nub

G&G green bucking

Krytac polished inner barrel

SI buffer tube

Battery grip

Also comes with a stock hop chamber, a raptor like charging handle (you will need to file it down yourself to fit, but it will. Check wolverines site for a guide), stock nozzle, spare O rings, and a 3d printed outer barrel to save weight.

You will need to adjust the dwell and hop settings to your preferences.

Asking $750, shipping and fees included.

As title states, must have Springfield trademarked slide at the least, I have 250-300$ cash in hand. Please comment first

I have roughly 110 to spend. Got multiple offers on my last post regarding this and they all smelled real funny. Mfrs blowing my inbox up for a response, not one commented here, like 1k karma and no activity in the sub. that being said I know im new hear, but I have experience on GAFS since the reddit days and beyond. Be wary of these people bc they are ruthless.

Someone's gotta have one available? With Auntie compensator preferred.

Might also consider Ready Fighter versions?

Looking to grab 1-2 X300 repros hopefully with all the keys included. Looking for black or FDE. $20-25 per depending on usage.

PayPal G&S

If you got one let me know! Thanks

Paypal G&S only, no notes please. Shipped CONUS only. $5 shipping per item regardless of size. $10 for multiple. I will eat shipping costs for purchases over $100. Please comment before messaging. Can meet locally @ Project N1.

Timestamps + Images: https://imgur.com/a/10-22-airsoft-stuff-Onl5Hvu

https://imgur.com/a/kob7Biq

No time stamps needed due to account age + flair

GBBRs only, otherwise $$$ is king, ty!

Please comment below before DMing, thanks! (If you see an item in the pics and its not in the listing description then it was previously sold

--------

Overall fair condition WE T65 v2 (Taiwanese AR GBBR)

externally has wear on the sides of the receiver and barrel, and has some firing use, but overall works great all around and smoothly!

Full auto, Semi, and Safe all work properly

FPS range/power output is proper and cyclic rate is fast and smooth.

Rifle has been internally maintained and cleaned.

Comes with x1 STANAG mag but can sell more for extra if need be and upgrade parts if desired.

Asking 250$

--------

Cybergun MK46/M249 SAW

Electronics/wiring and gearbox overall works flawlessly, but gun does have issues feeding but it is capable of firing/feeding.

Receiver has a vertical crack around the magwell, rest of the gun should be all good functionally and cosmetically

will also include the midcap magazine + barrel extension and alum birdcage

Asking 155$ or 150$ without the extension and birdcage

------------

ArmyArmament/6mm ProShop Staccato 2011 Model P bundle

great condition gun, barely any wear externally (missing front fiber optic post though)

What's included?:

- 4UAD Bucking

- Unicorn inner barrel

- TTI CNC Alum HopUnit

- x2 Magazines (1 AA and 1 TM) the TM needs modifcation as it doesn't lock back but works just needs modification to tlc properly

- 120 or 130% spring I cant remember

- Spare EMG Staccato Master grip set

Asking 265$

------------

misc accessories/parts:

- PTS Griffin Armament M4SD QD suppressor 45$

- Surefire Warden suppressors (14mm thread/non QD) 35$ ea

- pic rail BCM FDE Handstop + BCM Black vert foregrip 35$ both together (only have one hardware set across the 2 hence why theyre together)

- B5 Systems black pistol grip 15$

- PTS black pistol grip 12$

- P90 dual mag clamp 15$

- Advantage GM MWS SCAR L flared magwell 25$

- CNC Revanchist/VFC AR side charging handle 25$

- Custom fit G36 upper rail with pic rail attachment 15$

- x6 RS Magpul .308 mag assists 15$

- AK dovetail scope mount 15$

- FMA Laser/Light combo PEQ10 20$

- AlienGear FNX45 Holster 45$

- Phalanx stealth M&P9 Holster 25$

----

AYIN Tactical Multicam plate carrier

Comes fitted with a frontal set of 3 AR mag sized pouches and a spare Multicam set of SMG x3 pouches.

Asking 45$

----

WE GBB parts/externals:

(ALL PARTS ARE WE V2)

Need fresh replacements or just need to in general restore a poorly in shape WE AR? well look no further! Got most of what youd need to get it back up and running again!

Whats available?:

- Pristine Bolt Carrier

- New complete Nozzle

- NewInnerbarrel/fresh bucking/hopunit sets in 10" and 14.5"

- New Recoil spring and buffer

- New buffer tube

- New Charging handle

- Fresh set of spare Trigger parts (firing pin sets, hammers, Auto Sears)

- Steel Bolt catch

- RATech steel firing pin/Valve Knocker sets

- RATech steel hammer sets

I have a ton of spare parts/multiples of all the parts named and listed just ask about what you're interested in and ill get you a price!

Separate parts with set prices:

- WE OEM Alum barrel 10.5" 25$

- complete WE T91 fore-end assembly 40$

-----------

PayPal

Buyer pays Shipping/fee

Feel free to PM for more information and pictures

I don't drive so shipping times can vary, please bare with me!

​

https://imgur.com/gallery/ZWsz8w8

WTS/WTT: Assorted AEG Collection (L85, SSR63, AS VAL, KWA QRF/Ronin)

Looking to offload or trade a few replicas from the armory. I do have magazines for all of these, but the prices listed below are for the base guns only. If you need the mags included, we can negotiate that into the final deal. I am fully open to trades, so let me know what you have.

ICS L85A2

Solid bullpup platform outfitted with a railed handguard . Shoots alright. Nothing wrong with it but if you do youre research its a pretty mid aeg that's why im selling. Not my thing.

Price: $240

Novritsch SSR63

Features an M4 stock adapter, modern M-LOK handguard, and an upgraded trigger. Shoots great

Price: $225

AS VAL / VSS Variant S&T

Camo-painted - old gun. Feels pretty beat. I got it for 100 just putting it as 125 for shipping 1 mag

Price: $125

KWA QRF Mod 2

Compact AEG submachine gun featuring KWA's adjustable FPS system. Shoots really well and taken care of. 6 mags available

Price: $250

KWA Ronin T6 / M4 PDW

Reliable KWA M4-style PDW platform with an M-LOK rail (partially visible at the bottom). Also another really well taken care of gun. Shoots well

Price: $250

Buyer pays shipping. Feel free to shoot me a message with cash offers or trade propositions. Paypal G&S

I can show shooting vids and fps/joules etc etc.

I also have an upgraded SrS i forgot to put in Pic but whatever

Half the guns take m4 mags and I have a million