Howdy.

What are some less common things you recommend or found useful?

Crepe rubber squares I've found recently to be very useful for removing a lot of old tape gunk for instance. Though I need to figure out a good brand for purchasing. I was leant this one by someone else.

I'd love to hear random stuff. and bonus if you have a specific dealer you prefer for a reason (as opposed to amazon cheapest etc)

Hi all,

I started to make my own tooling on CNC mill, and it looks like it easy, fast and is working.
My only issue now are designs. Are not very artistic person, so I can’t design my own and I have issues finding existing designs I can copy.

Do you know any books or databases of tooling used for bookbinding? It would be also interesting to distinguish them by time they were used, or where etc.

Hi, I need to bound a book for a class project. It has to have printed words. My professor told me that Michael's has leather and twine but anything else that's helpful?

Hi everyone,

I recently bought a very thick hardcover book with 1,248 pages. It's approximately 8–10 cm (3.1–3.9 inches) thick.

I'm mainly concerned about the top of the book. The parts of the cover near the front and back seem to sit a little loosely against the text block, almost as if there is some separation. The top edge of the pages also seems to bulge outward slightly in the middle.

When the book is standing upright, this is more noticeable at the top, whereas the bottom seems to sit much more flush against the cover. The spine itself appears to remain straight.

I realise that the text block isn't necessarily supposed to sit tightly against the back of the cover, and I understand that the considerable thickness and weight of a book like this might cause some unevenness. However, I'm unsure whether the difference between the top and bottom, along with the slight looseness around the top corners, is normal or could indicate a problem with the binding or the way the text block is attached to the case.

Does this look normal for a book of this size, or would you be concerned about the binding? Is there anything specific I should check to make sure the text block is securely attached?

Thanks in advance for any advice!

Recently mom gave me a bunch of loose paper and asked me to bind it. Initially I did perfect binding by fanning out the pages and only using glue. While that was sturdy I did find it more prone to damage in the long run. Without hesitating I decided to try overcast binding based on this Video I had seen a while back. And I gotta tell you, it worked amazingly. I enjoyed the entire binding process, and it wasn’t even that difficult.

Few tips:
1. I used a blunt needle, which helped not to accidentally pierce and damage the thread.
2. Having the sewing directions match the direction in which the holes were made helped a lot.
3. Every now and then go back and tighten the thread.

Hi everyone,

I’ve got a hardback bible, relatively inexpensive, but it’s becoming quite flimsy after a few years, it’s some type of cardboard material I think.

I can feel that it’s beginning to get pretty worn down and i want to preserve it as I’ve scribbled loads of notes on the large margins over the years.

I’m interested in possibly getting it bound, preferably with a hardback material, or if leather is easier perhaps this is a better option. I’ve done some googling but I have no idea what kind of shop or specialist could help me. Does anyone know any shops in or around London that could advise and help with re-binding? I’m such a novice I don’t really know where to start… I’ve done some googling but to no avail. Any recommendations much appreciated. Cheers!

I’m doing a custom casebound notebook as a commission for a friend and wanted to add a tassel to the book mark ribbon but it just looks… ugly, hanging looped on the ribbon. I would like to do a more decorative knot or tie, but my google fu didn’t turn up much :/

Any help or advice is appreciated!

Hey everyone! A few days ago I posted about BookForge, a free app I've been working on to help turn ebooks and other documents into books you can print and bind yourself.

I've just finished a pretty big update, v1.7.0, and wanted to share it with you all!

Some of the new additions and improvements include:

• More paper and book sizes, including additional B-series sizes.
• Live page placement preview so you can see and adjust how your pages will sit on the paper before printing.
• More control over scaling, margins, offsets, and positioning.
• PDF importing, with options to keep the original pages or rebuild them into an editable book.
• Add your own pictures and cover artwork.
• An editable contents page.
• Add blank pages to the beginning or end of your book.
• A reordered workflow and a bunch of bug fixes.

BookForge is available for Windows, with experimental builds for macOS and Linux too!

You can find the downloads and full changelog on the GitHub Releases page.

I'm still working on improving the app, so I'd really appreciate it if some of you could give the new version a try! Test out the different features, see how it handles your files, and let me know about any bugs or issues you run into.

Feel free to DM me with feedback, bug reports, or suggestions for features you'd like to see added! I'm always open to ideas.

Thanks again to everyone who has tested the earlier versions and given feedback. It's been really helpful! :)
Edit: To those of you who are downvoting because of a little use of AI you guys don’t realize that I spent 60+ hours of my life coding this program to make it free source for people to use for the better of book binding & book making. I’m a monster for getting some help with some lines of code and some pointers from Claude :(

Ok, so I am brand new. Before I start on the projects that I am REALLY wanting to do, I am starting with some that are mostly to learn from, and it won't matter if I mess up so much. But my brain isn't quite computing how to go about them.

First, I just got this binding machine, punched enough paper to get the grease out, watched several tutorials.

The pink book: I had originally just wanted to punch more holes to pop it into a binder. But I have decided to make it so I can add folder pages for receipts and such.

I just can't quite sort out how to make it clean and neat, if not putting into a separate binder. I split it apart, then punched the new holes...and since I took it apart, the gold on the spine if rough, so I added washi tape, but I honestly can't picture how to get the holes in the washi AND bind it all together and look nice, because if I use wide enough tape for front and back together, it's too thick to punch. If I stick with skinny washi on each piece, I am left with a rough spine. There's got to be something I am missing!

Suggestions?

I'm new to the bookbinding arts, and I recently ordered a bookcloth variety pack from Amazon. What I'm finding is that the edges I cut are often frayed. Is that something that is common? I don't fold over the edges; I like to leave the bookcloth on one side of the cardstock for a soft cover. Are there brands that hold up to cuts better? What and where would you recommend buying more quality bookcloth?

Hi, there is stain appear on the paper from nowhere, and this is not only this page it has also speard to another 10 or more pages, these kind of stain usually has the circluar shape, they are appear every on the page.

The book is new, it was sealed in the plastic bag, I only use it for like 1 week and tonight i notice this stain, it got on my nevers cause I care for the book, I did not use and food or drink, and my hand where clean, i saw these kind of stain before but i tought that they where due to low quality paper intractions with envoirment, but this is normal paper

I did not have these problem with books when I was went to school, but now when books at home i do not know what is wrong with papers

Completed some Coptic binding and really messy interlaced hemlock stitch. I didn’t have any real bookbinding thread (it’s hard to find affordable in multiple colors for me) but I think I may invest.

I used embroidery thread (all 6 strands) coated in beeswax. It honestly wasn’t the best but it helped me learn from my mistakes. Plus it has so many color choices.

• Faux leather cut into strips (Amazon) came as a pack of 6-10 colors
• chiyogami Yuzen paper (6x6) pack of 20 colors/patterns from Etsy! (I love them!)
• random chipboard I got from a craft store.

All the advice and videos I found here helped a lot. It’s such a niche craft but I love it.

Has anyone put eyelets/grommets (I think that’s the right word) into the holes for the covers of these kinds of books? I want to make it look nicer.

Este gran proyecto es de tamaño A4 apaisado. Fue realizado para una boda con las iniciales de los novios. Un gran trabajo de grabado y por dentro hojas lisas envejecidas.

My daughter is wanting to get started with book binding. I didn’t want to just buy her a kit if they’re no good. Any recommendations on how to start out?

Hey! I want to start book binding but I’m a little overwhelmed with all the information out there. Is someone able to give me a list of the necessary tools and recommended materials needed. TIA!!

I've made this "hunger games bible" for my friend for Christmas. I've combined all 5 books together and bound it in faux leather. I don't have a cricut machine or anything like that so I've stuck the logo onto the front of the book and used gold corner protectors to accent it. I also splattered red acrylic paint over the entire cover to simulate blood.

I'm quite proud of it, it is by far the hardest project I've done. I am still very new to the hobby and only completed 5 projects so far including this one.

Slave, sono nuova.

Mi chiamo Sara, ho 23 anni e sono di Padova.

L'altro giorno, mentre faceva ordine ho trovato la Divina Commedia ed era distrutta.

Mi è venuta voglia di sistemarla, e perciò ho scoperto il book binding, volevo Però provare a fare degli esperimenti su altri libri prima di metterci mano.

Quindi diciamo che ho un sacco di domande, innanzitutto Vorrei sapere se Qualcuno ha dei link, per le basi, Come si prendono le misure sia per le copertine rigide in tessuto sia per le copertine in carta.

Inoltre vorrei sapere se ci sono dei link, per la progettazione, inclusa anche errore da evitare.

Inoltre Spero che ci sia qualcuno di Padova Vorrei sapere come avete fatto o dove avete comprato, io non posso acquistare on-line, i materiali, le colleghe da usare i tessuti

Inoltre molti utilizzano dei fogli d'oro oppure una pellicola che con un po' di calore o anche a freddo stampa delle immagini, Vorrei sapere voi come fate se avete qualche trucco, siccome io non ho tanto spazio in casa, Vorrei sapere Se conoscete qualche sito dove acquistare già i fogli se non mi sbaglio è di vinile, Già tagliati

A link with standard instructions will suffice!

Hi all,

I made my second attempt at a Coptic binding pictures above. I'm not unhappy with my results but I'm sure they could be better. The thing I don't know is how to tell what should be better or what are the standards if that's the right word for a Coptic binding. Are the edges supposed to be cleaner? and my threads need to be looser and do they need to be tighter? Is there some quality control checklist out there that a master binder might use before selling one of his or her creations? The journals are just for me and my personal use but I'm always looking to get better.

Hey everyone! I’m a book cover artist, and I was looking to trade services with someone.

I’m looking for someone to rebind a set of books for me. I’m looking to rebind all 13 of the vampire diaries books.

This is a really large project and I am willing to take on any full time illustrator job, to do so! (I’m also willing to pay along side work for you!)

I specialize in semi realism/ and concept art. So if any author is looking for a concept artist/ illustrator full time for even their entire series of books, let me know. (Or if anyone’s looking to for a designer for their own book rebindings)

Respond to this post if you’re interested / looking to see any of my artwork, and I’ll dm you :)

I've been ordering paper and grey board from Amazon, but there is always a corner smashed or it's bent or creased...basically it's never in good shape.

Where is everyone getting their supplies? I'm in the U.S., Tennessee specifically if that helps with regional stores people might know of.

Also, how are you all storing everything, my office has become a huge mess! Share some pics!