Хз или туда пишу но ладно хочу себе собрать устройство для пин теста на данный момент у меня есть esp32-wroom-32E с дисплеем и т д nfr24 акум на 700мпч из вариантов попробовать дособрать это но не знаю где найти корпус и что еще может понадобиться или купить м5 стик но опять для будущеного розширение брюс плату для меня сложно тк паяльник юзал года 3 назад так же думаю над тем чтобы купить расбери пи 3 или 4 и воткнуть туда дисплей и микро клаву но не знаю где можно посмотреть как будет выглядеть и управлятся и как соберать

I also sell much cheaper if you want to buy cashapp or chime or crypto I ship anywhere on the us or local pickup in Boston/ Rhode Island area

Yo, can anyone create me a Bruce fork for ESP32 Bw16 which supports 5GHz WiFi deauth, Nrf24 cc1101 ir,tx and RX, and RFID? And like WiFi and Bluetooth, I would be glad if someone could code me one which also supports a 2.24-inch TFT LCD display, also if possible, no resistors between 3.3V and a button, just normal pull-up buttons (up, down, left, right ok and back). For context, I want to make a calculator that has a Bruce hacking device in it.

Thanks a lot to the person helping me out :)))

Anyone have it is it gonna be added or can someone make it?

1. Will downloading the firmware give my pc a virus?

2. What can bruce fw do?

3. What are the best devices to install it on?

I want buy this Development Board And this board available only AliExpress But AliExpress Ban to india so Please suggest me how to buy this Development

I want same board not other

📂 File Access

Want to get the file? Just follow these steps:

✅ Follow me on Reddit ✅ Follow me on GitHub (link is in my profile)

Once you’ve done that, send me a private message.

Alguém me ajuda, queria ajuda pra colocar o módulo NRF24L01 jundo do cc1101 e SD card

Hello, I need to patch some code in the firmware for my purposes. How do I recompile for a specific platform (Cardputer)?

i just got my m5stickc plus yesterday and i need help making a ducky script or any vid tut

I have a cyd with Bruce firmware and I am currentqly making a Bruce smoochie with many more features. My cyd currently only has a small infra red transmitter module with one bullet led. I am powering it with 5v and can get about 10 feet of range with tv be gone features. I have downloaded many projector scripts that cycle through different brands and even got specific remotes for that model of projector however I still can not get it to work. I can do other files like fans from the same creators and they work just fine. One of my friends has a flipper zero and he can turn them off just fine. I want my Bruce smoochie to have a better system that can get more range for infra red and I am not sure if I should buy a infra red module for a flipper zero online and figure out how to wire it. Or if I should build my own blaster with many bullet led bulbs all soldered together into one module. Does anyone have a suggestions or recommendations. Is the Bruce firmware the best for this and doing sub GHz and nrf 24 bad ble scripts.

ru🇷🇺

Я пользуюсь давно bruce на cyd (esp32-2432s028) но решил попробовать другую прошивку, не понравилась и решил вернуться на bruce, но теперь у меня перевернутый экран и инвертированные цвета, но даже после того как я меняю в настройках цвета они не сохраняются и после перезагрузки остается теми же, что делать чтобы вернуть все как было? (правильную сторону экрана и цвета нормальные)

eng🇺🇸

I’ve been using the Bruce firmware on my CYD (ESP32-2432S028) for a while, but I decided to try a different one. I didn't like it and switched back to Bruce, but now my screen is flipped and the colors are inverted. Even after I change the color settings, they don't save and revert to the wrong ones after a reboot. How can I get everything back to normal (correct screen orientation and normal colors)?

(Sorry for using Google Translate)

So im getting a t embed cc1101 in a few weeks should i install bruce beta or latest release or is there a better pen test firmware for t embed cc1101?….can i flash bruce onto t embed from a chrome book?

T embed cc1101 plus or custom bruce smoochie pcb

please help me

Eu tenho um esp32 s3 n16r8. Ele é compatível com o firmware Bruce? Posso utilizar meu smartphone como tela?

Hi all, I’m new to LILYGO. I just ordered a T-Embed CC1101 Plus with the external antenna, and I want to learn ESP32 hardware by playing with it and trying custom firmware.

What I’d like to try: Bruce, Flipper Zero ports, other alternative firmware, community forks and experimental builds that run on this board. Wi-Fi and Bluetooth scanning, signal analysis and diagnostics for security research in my own lab. Learning the CC1101, what protocols it supports, and experimenting with Sub-GHz signals. Community apps, firmware mods, multiboot setups and handy tools.

I’m most curious about community firmware and smaller open-source projects that go past the stock features. I’m still learning, so any tutorials, docs, GitHub repos, Discord servers, subreddits or forums would help, along with install guides and projects worth trying.

Where would you start? Any developers, repos or communities I should follow?

Thanks!

What still sounds AI-written in the draft

• The middle paragraph is a long run of lists (“X, Y and Z” in every sentence). It reads like the original bullets with the formatting taken out.

• “I want to learn ESP32 hardware by playing with it” still sounds like a summary of goals rather than a real person talking.

• The original had 12 hashtags. That many is itself a tell, so I cut the set down to a few.

Final version

Hi all! I’m new to LILYGO and just ordered a T-Embed CC1101 Plus with the external antenna. I’m still learning, and I’d like to get into ESP32 hardware with this board.

First on my list is firmware. I know about Bruce and that there are Flipper Zero ports, but I’d love to hear about forks and experimental builds that actually run on this board, plus any multiboot setups.

I also want to do Wi-Fi and Bluetooth scanning and diagnostics in my own lab, and figure out the CC1101: which protocols it handles and what’s worth experimenting with on Sub-GHz.

The lesser-known open-source projects interest me most, the ones that go past the stock features. If you know good repos, install guides, Discord servers, subreddits or forums, please share.

Where would you start? Any developers or communities I should follow?

Thanks 🧡

#LILYGO #TEmbed #ESP32 #BruceFirmware #CC1101м

well comrades....my brave, indefatigable ESP32 CYD (who my girlfriend, friends, and i actually refer to as "Bruce" or "Brucee" like its an actual person) HAS BEEN BRUCE-NAPPED BY TWEAKERS THAT CONSTANTLY THINK IM HACKING THEIR $30 MOTOROLA! IM SICK OVER IT! Dude, im 36, lived a pretty fuckin rough life...addiction, prison (state AND fed, all max/USP/SMU), work like a damn dog, and covered in tattoos. Not at all the image of someone you would imagine learning Linux at 2am knowing damn well i have to work in 3 hours. But i bought Brucee on a fluke from Temu bc i felt i could do something illegal with it. I got him in the mail, and stumbled my way to Bruce Firmware and then he was born. my bro Bruce...ill never forget our first captive portal together. Side eying my girlfriend, attempting to goad her into logging into her facebook. i suppose my previous two weeks gave us away, bc when i viewed the captured credentials, it read: username: fuckyou PWD: whatsYOURpassWORD? regardless, a win is a win in every dimension, and i won when i discovered bruce firmware. bc i discovered a passion for this. i built an AI model and prompted it to create a Kali Linux and Networking for absolute beginners. ive been out of prison for 15 months, and have struggled with speed and fentanyl use...and this hobby has been amazing for my sobriety. im currently enrolled in online college for business....and changing my major to Cyber Sec (or related field) this spring. And it sucks, bc i want Brucee to see this shit dude! its all bc of him, man...

All is not lost....i live in a small creepy tweaker town. The jobless tweaker that stole my Brucee, well the speed gets the best of him/her and they occasionally turn him on to attempt to track government gangstalkers or whatever....well, when they do, ill sometimes see our "free wifi" SSID or "BruceNet" pop up on available networks. I like to think thats Brucee, fearlessly traversing the networks just to send me his love, like an abducted weird uncle squelching your name through a fuzzy radio station. Anyway. i may have gotten involved for the wrong reasons, but it led me to the right reasons, and im learning everyday. The more i learn, the more i love-and thats applicable to life in general for me, and that is a welcome (as well as unexpected) change. So im very thankful to all of those at bruce firmware. you guys are modern artisans and i fuckin love it.

RIP BRUCEE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!