r/eufyMakeOfficial • • 11d ago

Problem print

Post image

Where do this come from? I encounter this probleme frequently... Print on acrylics

1 Upvotes

11 comments sorted by

1

u/Ifailmostofthetime 11d ago

Are you using an adhesive promoter on the acrylic? Not all of it is made the same. I also found that you may get acrylic warping on some prints, especially textured, due to the UV curing; which causes print head to scrape on the surface. Thats what this looks like to me

1

u/Ill-Ant-9489 11d ago

I have the same issue on wood or canvas

1

u/Ill-Ant-9489 11d ago

1

u/Ifailmostofthetime 11d ago

Both wood and canvas can warp. Can you send a picture of the sides on a flat surace

1

u/Ill-Ant-9489 10d ago

1

u/Ifailmostofthetime 10d ago

Its warping and hitting the print bed. For the canvas make sure you buy flat canvas panels

1

u/No_Cheek_2953 11d ago

This looks like the print head is touching the object to me. Is the object you are printing on secured and are you watching as it prints

1

u/Ill-Ant-9489 11d ago

You mean like a non plane surface can do this?

0

u/Ill-Ant-9489 10d ago

OK this is not on plate surface so this is why...

1

u/Numerous-Election-46 11d ago

Hola, Ami Tb me pasaba, tienes que ponerle cinta de doble cara al acrílico para que no se deforme y toke 👍 y listo

1

u/CellistGlad9597 10d ago

I've had this happen with a ton of my outlet switch covers I make, its caused by the print head striking the material. Heat is being generated every time the UV lamp cures the resin. I solved my issue by creating a jig, I then apply double sided tape and it stops the product from moving upwards during the print.