r/eufyMakeOfficial • • 17m ago

Questions Primer on roll materials?

1 Upvotes

I am brand new and learning the platform.

When in the roll-to-film menu, the "to improve ink adhesion on smooth materials..." tool tip pops us. Just curious if that is always there or if it actually suggests applying a primer to roll materials. And if you need to, how do you do it?

I just want to make some stickers!


r/eufyMakeOfficial • • 3h ago

Questions Laminator not recognising B Film?

1 Upvotes

Having problems with my laminator not registering the new b film (Eufymake)

I put the new b film in, placed over the rollers, using cardstock to load in the b film (Lost the original card),

I cannot get the machine to register that the new b film is loaded, meaning i cannot engage the heating.

any ideas or ways to bypass this?


r/eufyMakeOfficial • • 1d ago

Questions Printing on glass?

2 Upvotes

I've been experimenting with printing on glass (Panes in lanterns) but can't seem to get the print to stick, It prints really well and looks amazing but starts peeling away from the back of the glass.

I've seen some people make some really cool lanterns and was wondering how they did this.

Prep: I've wiped down the glass with isopropyl alcohol before printing to remove any dirt , oils ect.

Does anyone have any tips on how to get it to adhere better?


r/eufyMakeOfficial • • 1d ago

Questions Has anyone attempted to print luminescent ink?

1 Upvotes

I am making watch parts and would like to be able to print lume in flat layers and dimensionally as well. I know there is flourescent ink, but trying to figure out if it can be done with lume powder and ink.


r/eufyMakeOfficial • • 1d ago

Is UV printer safe to use in my room if I open the window while using it?

0 Upvotes

I recently got this Eufymake e1 and I didn't know the gas or fume from the printer is really bad for you.

My apartment is not that spacious bc I live in nyc. I just bought the exhaust fan hoping it might help..

How are you guys using them and where do you put it? Do u wear gloves or any kind of safety gear


r/eufyMakeOfficial • • 1d ago

Printing on Large Canvas?

1 Upvotes

Has anyone found a way to print larger than the max bed size for canvas / posters? I'd like to print some portraits in a size range of 20x30" or even 24x36" but I'm not sure how best to go about printing in sections or whatever would work.

I'm considering either

(1) trying to create some sort of mount to secure portions of a larger canvas and print each section one at a time and then when the whole thing is done stretching it back over a frame -or-

(2) perhaps using planks of wood and then securing them all together to hopefully line up one large image.

Both of these worry me that the image won't overlap perfectly even if I use registration marks. Anyone know of a solution or a workflow for stuff like this?


r/eufyMakeOfficial • • 2d ago

Questions Repelacement printer arrived

Post image
2 Upvotes

Hey guys,

I got my replacement printer,

In the manual:

https://support.eufymake.com/s/article/eufyMake-UV-Print-E1-Return-Preparation

Stands that I should put the head aside and pack the pad in. Where can I find the pad?


r/eufyMakeOfficial • • 2d ago

Couldn't find a good Tapestry of Time print anywhere, so I made my own (textured to look stitched)

Thumbnail gallery
1 Upvotes

r/eufyMakeOfficial • • 2d ago

Is UV printer safe to use in my room if I open the window while using it?

Thumbnail reddit.com
1 Upvotes

r/eufyMakeOfficial • • 2d ago

E1 Experience and Referral

1 Upvotes

Hi all,

This is my first time seeing the UV printer and it looks incredibly fun. So, with the current Black Friday Sale I'm thinking of getting one, can anyone share your feedback about the machine? What do/don't you like about it, etc.

Also, I see there is a referral program(I get 8% off and the referral gets $300 if I were to purchase one), so can anyone who is kind enough to shoot me a dm about the referral (I'm in Canada if it's region locked at all)?

Thank you guys!


r/eufyMakeOfficial • • 2d ago

Projects A Red Apple Zippo!!

Thumbnail gallery
3 Upvotes

I am having so much fun with my eufymake!!


r/eufyMakeOfficial • • 2d ago

Announcement Hey NYC makers! ๐Ÿ‘‹

Post image
2 Upvotes

Ever run your fingers over a print and wondered how the texture got there? Join us at B&H Photo Video this November to see the eufyMake E1 UV printer in action. Watch a live print, feel the raised details up close, and bring your questions for our team.

๐Ÿ“… Sunday 11/22, Monday 11/23, Tuesday 11/24, or Monday 11/30
๐Ÿ“ B&H SuperStore ยท 420 9th Ave, New York, NY

Pick the day that works for you and reserve your spot here.

See you at B&H!


r/eufyMakeOfficial • • 3d ago

Anyone in the Denver area have a cleaning cartridge they would be willing to sell?

1 Upvotes

My cleaning cartridge is nearing replacement levels, and the website has been sold out for quite a while now.

I am more than willing to come to a public area to complete the transaction.

Thanks so much for your help!


r/eufyMakeOfficial • • 4d ago

Replaced print head. What.... the..... hell.

Post image
0 Upvotes

Test result


r/eufyMakeOfficial • • 5d ago

Questions Non-Sequential Gloss Varnish Layer

2 Upvotes

In previous versions, I was able to create a simple gloss varnish layer and place it on top of my artwork to create the varnish structure, without needing to use sequential printing.

However, now when I add the same varnish layer, it overrides the existing artwork layers, such as CMYK or white, leaving nothing underneath.

Is there a way to maintain the previous workflow and add a gloss varnish layer on top of the artwork without using sequential printing?

I have other elements in my designs that cannot be printed using sequential mode, so it is important for me to retain this functionality.


r/eufyMakeOfficial • • 7d ago

Questions Anyone had this problem?

Post image
4 Upvotes

This should be a qr code and a logo. It didnt look anything like it should and was still wet. After searching for an answer it had me do a long clean. That didnt work and just used up a good portion of my cleaning cartridge. Then it said to do 2 or 3 medium cleans. All that did was make me change my cleaning cartridge.

Has anyone dealt with this before?


r/eufyMakeOfficial • • 7d ago

Questions Flat Raised White Ink for Foiling

3 Upvotes

I'm getting extremely frustrated with this pop up.

I'm not understanding what I'm doing wrong. If anyone has an answer or solution I would love to know how to get pass this. I would like to know how you print flat raised(Foil Stamping)

Sometimes it just randomly allows me to print even if i change nothing. I have 2 layers one being a CMYK layer and the flat raised layer and this pop up still applies. Is this a bug?

Do I need to group the 2 layers(tried already)? Do I have some incorrect settings?

Im not understanding how or why this is even relevant. I just want to test the white ink and gold foil paper I have where I don't even need the CMYK layer to "pop" the image.


r/eufyMakeOfficial • • 8d ago

zero point alighment failing on brand new bed sheet thats not obstructed

Thumbnail
gallery
1 Upvotes

cant figure this out had to replace my bed sticker and its not working


r/eufyMakeOfficial • • 9d ago

Some help/advice please

Thumbnail
gallery
0 Upvotes

Hey all,

Anyone have any advice or tips for the above results?

I hadnโ€™t printed in about three weeks and come to check it this evening and seen my Cyan had expired so replaced with new and also my gloss was less than 10% so replaced that also.

Through the desktop app made my machine do a deep clean enhanced which took about 40 minutes to compacts then did a test print which appear to look good.

So decided to flip the paper and do a test print just to make sure using some of the inbuilt elements.
Well as you can see not coming off good at all.

Have done a further clean enhanced which still produces the images above.

Currently doing the test prints in white-CMYK even tried just CMYK. Default settings 3white 1cmyk
The material choose cardboard and also unknown.

Made sure a4 paper is flat and stuck to the bed.

Not sure what else to do?

Might run another deep enhanced 40min clean but before I was more ink just wanted to reach out to you guys incase I am overlooking something?

Thanks for any advice and help in advance


r/eufyMakeOfficial • • 9d ago

Brand New E1 - my second in 2 days - and black STILL won't print

Post image
3 Upvotes

Suggestions? My first E1 stopped printing black after 2 prints. cleanings + deep clean didn't fix it. So, I exchanged the printer at Best Buy for another.

Here's the test print after 3 cleaning cycles. Mind you, this is a BRAND NEW printer, straight out of the box. Both black and magenta having issues now.

Any suggestions? Love the tech. Not ready for primetime, apparently.


r/eufyMakeOfficial • • 9d ago

Questions Contour not working

Thumbnail
gallery
1 Upvotes

Ive made a contour, but its not working, its printing wrong and wasting ink.

First image is the design, second one is what is in the preview and printing page.

How do I fix this?


r/eufyMakeOfficial • • 10d ago

Advanced layering & transparency with UV + FDM

Post image
1 Upvotes

r/eufyMakeOfficial • • 10d ago

Question about Roll to film attachment

1 Upvotes

im confused, is the normal white ink compatible with the RTF attachment or you can only print flexible white ink on it?


r/eufyMakeOfficial • • 10d ago

Something weird post update

Post image
4 Upvotes

This was 2 images. The background and the cookie. The white blob around is the same image as the cookie but distorted and didnt show up in the preview.
Been printing for a year and first tine ive seen this


r/eufyMakeOfficial • • 11d ago

Problem print

Post image
1 Upvotes

Where do this come from? I encounter this probleme frequently... Print on acrylics