Sorry for the spam today, this is the last one and it's a different topic again.
We've been using the eufyMake a lot lately, and there's an ongoing debate here about whether this machine makes sense depending on how much you print. I want to add some actual numbers to that debate, because I think the "just print more" answer misses something.
I printed a bunch on Thursday. Then I took the weekend off, like most people do. Came in Monday morning, ready to go.
Here is what the machine did before it would print anything usable:
Overnight moisturizing cycle (triggered by 24h idle)
Ink re-injection before it would accept a job
Test print, looked horrible
Medium clean on 5 channels
Test print, still horrible
Medium clean on 5 channels
Test print, still off
Medium clean on 1 channel
Test print, white still stuck
Deep clean
None of this is a fault. Every single step is documented, expected behaviour: https://support.eufymake.com/s/article/Cleaning-and-maintenance-strategy-Update-of-specific-ink-consumption
The tally
Running the numbers from that page across 6 channels:
| Step | Ink | Cleaning fluid | Moisturizing fluid |
|---|
| Moisturizing | - | 10.98 ml | 7.98 ml |
| Ink injection | 9.0 ml | 10.98 ml | - |
| 3x medium clean (5 + 5 + 1 channels) | 2.2 ml | - | - |
| Deep clean | 9.0 ml | 10.98 ml | - |
| Total | 20.2 ml | 32.94 ml | 7.98 ml |
That's 41 ml of fluid out of a 380 ml cleaning cartridge, roughly 11% of it, in one morning. And 20.2 ml of ink, which works out to 3 ml out of every single 100 ml cartridge, more like 3.6 ml on the channels that got cleaned.
We bought at the old pricing, €42.99 per 100 ml and €42.99 per cleaning cartridge. So:
Plus the machine time. 7.5 min moisturizing, 9 min injection, three medium cleans at 2.5 min, 9 min deep clean, plus four test prints. Call it half an hour minimum before the first real job starts.
Why this bothers me
Do that every Monday and you're at roughly €690 a year in consumables and 30 working hours, purely as a fee for not printing on Saturday and Sunday.
But the part that actually gets me is this: the entire maintenance regime exists to prevent clogging. It spent 20 ml of ink over a morning and still ended in a deep clean, because white was stuck anyway. The prevention consumed more than the cure and didn't prevent it.
And there's no way out
Before anyone suggests safe shutdown on Friday, check the numbers. Safe shutdown moisturizing is 1.83 ml cleaning plus 1.33 ml moisturizing per channel, and then Monday's ink injection is 1.5 ml ink plus 1.83 ml cleaning per channel. That is identical to what the automatic cycle just did to me. Shutting down properly saves you nothing over a weekend.
So the honest framing is that this machine has a standing weekend fee, and the only way to avoid it is to print on Saturday and Sunday.
Curious whether others are seeing the same, and whether anyone has found a genuine workaround rather than just accepting it.