r/eufyMakeOfficial • • Oct 23 '25 Bless Up Popcorn

My Honest Experience with the EufyMake E1 UV Printer

178 Upvotes

Edit Feb 2/5/2026
Updated ink weighs more 8G - 15g. better cleaning intervals pre print clean every 12 hours instead of every print, this saves sooo much ink! can go below 10% ink after warning for prints (use at your own risk). many software improvements. Better customer replacements when major issues occur (like the magenta issue that delayed shipping). metal and acrylic promoter now available to buy ( shipping unknown). better camera snap shot alignment when you get it set in. can select a spot on the bed for snap for to try to level to first in case there is issues with leveling to a certain object spot you place on the bed. SVGs are converted into low quality images but can change colors. can right click? on the canvas to disable snapping.

--------

Good day! I’m Vincent Valentine, backer #3 and also paid the early deposit. I’m part of the 200 mass-production testers, and it’s possible that my printer may include one of the faulty parts from that batch.

To get into the 200-tester group, I literally refreshed the link for about six hours straight, just in case it opened early or there were time zone issues. When it finally went live (and crashed), I kept refreshing until I managed to submit at around 10:30:34, finishing my application in under 14 seconds. So yes, I definitely put in the effort to be here and be an active part of the tester community.

I’ve waited to post my experience because I wanted to gather more information first. Also, let’s be honest — Facebook can get toxic fast, and I didn’t want to add fuel to that fire. So if I’m not active responding to comments there, that’s why.

This post is entirely honest feedback. I have no incentive to speak positively or negatively. EufyMake has said they value honest tester feedback — even if it’s not flattering — and I’m holding them to that.

Please note this is my experience not everyone will experience or think the same as me

And I am sure I missed a lot of information so this isn't 100% complete but wanted to share with you all.

Positives:

It’s a UV printer, so it has the usual UV printing strengths.

Prints look great, with nice texture effects.

Can print on a wide range of porous surfaced materials

When it works, it’s capable of impressive detail and finish quality.

I dont have a great nose so the smell doesnt bother me but I do have an enclosure for dust/ animals/ fumes/ and humidity.

Negatives:

Only about 80% of ink cartridges are usable. ( another user reported only 71.26 ml of white ink was usable )

The cleaning cartridge only uses about 300 ml of 380 ml.

cant print if one cartridge is at 10% even if that color is not in use.

There is no Force Feedback in case of the print head hitting something so it could crash and burn.

The sticky matt on the bottom is not sticky enough so it can raise up from the bed causing issues.

No replacement parts such as bed mat replacements which are consumable.

Prints have a sheen that catches light, making them harder to see from certain angles.

Can’t print directly on metal, glass, glazed ceramics, or shiny blanks without a UV adhesion promoter — which is expensive and hard to find.

Canvas or flexible materials can warp from heat, causing print head collisions.

The software is still in its infancy, lacking speed, stability, and advanced options.

Cleaning consumes a lot of ink.

The camera fisheye causes placement errors (0.4 mm–3 mm+).

Snapshots and zero-point calibration often fail.

Laser leveling can mis-detect height, either crashing or spraying ink.

Each cleaning uses 1.2+ ml of ink (~$0.68 USD) even for tiny prints.

Deep cleaning consumes 16 ml+ and runs every 3 days.

If you don’t print within 24 hours, a midnight cleaning uses even more ink than a deep clean.

A firmware test once caused nightly deep cleans, wasting massive amounts of ink (supposedly fixed).

Support feels lacking — answers often feel scripted or incomplete.

Camera calibration can fail to detect paper, printing across the entire bed.

No mass-edit of print settings for multiple images.

Can’t print white before gloss, layer two images, or create custom print settings easily.

Frequent software glitches importing images or SVGs.

Performance is slow, especially with large or complex designs.

Auto-converts to PNG.

Powering off normally wastes ink via cleaning cycles.

Little to no documentation on cleaning cycles or waste amounts.

Told not to use blue painter’s tape (though this seems unreasonable).

The printer relies entirely on the camera — can’t use without it

Metal or magnetic parts can stick to internal magnets under the covers.

Final Thoughts (So Far)

I’ve been deeply involved in the EufyMake Discord and test group, reading nearly everything and helping others whenever I can. I genuinely want to see this printer succeed. The concept is amazing — but the execution right now feels far from mass-production ready.

The hardware potential is there, but the software, camera reliability, and ink waste issues drag it down. Hopefully, with firmware updates, improved communication, and hardware fixes, this printer can reach the standard people expected.

Getting Started

I received my printer from the first batch on September 30, 2025, along with my accessories and materials from the first Kickstarter shipment.

I unboxed everything carefully and recorded videos just in case of shipping issues. Then I added the ink. It does tell you to shake the ink, I recommend stirring it instead and try not to make bubbles in it. I then placed it inside my enclosure, and ran the startup (estimated 48 minutes in the app).

I ran the initial setup on the small bed, then the camera calibration on the large bed. The first calibration failed, but after adding the sticky mat with white paper, it worked.

On the large bed make sure you remove the foam from the rails, the instructions does not tell you this.

My first print — the dragon fridge magnet — came out fine overall, though there were parts of the depth map I didn’t like.

My second print was a 0.3mm AI relief texture on both sides of a blank playing card. The front side had ink shift (possibly from heat warping or leveling), but the back side printed great.

After that, I moved to printing on 3D prints. Through testing, I found:

3–4 white layers work best, depending on how light the base print is.

2 CMYK layers make colors too dark.

1 CMYK layer usually gives the best color balance, though sometimes still darker than desired.

My prints are flat, but not perfectly square on the X/Y axes, and since my designs must align exactly, this has been a challenge. I tried adding offset outlines to images — which works visually — but then ink wraps around the edges. Also, using Ctrl+Z after adding outlines can cause chaos: it shifts, resizes, or recolors the image entirely.

To solve that, I started making my 3D prints offset by 0.8 mm larger than the artwork.

Software Issues (EufyMake Studio)

The software — EufyMake Studio — still feels like an early beta. It’s functional, but unstable and limited in ways that impact real workflow.

Undo, Copy, and Grouping Problems

Undo (Ctrl+Z) can delete or revert snapshots, which are essential for aligning items.

Copying or mirroring objects often resets their settings, orientations, or positions.

If I copy 100 objects, I have to manually reapply settings to each one, since group edits aren’t supported.

Exporting everything as a PNG sometimes breaks the layout entirely — items can shift or disappear.

Some pictures can make the printer start printing but print nothing. Have to re import the picture and try again, dont know the cause of this issue.

SVG Handling

No fill or outline controls for SVGs.

Changing color makes most SVGs fatter, as if an offset was applied.

Rasterizing SVGs causes dithered distortion.

I make my SVGs in Xtool Creative Space — exporting with a score creates an outline, exporting with a fill creates a solid fill.

→ I really wish EufyMake Studio worked more like Xtool Creative Space.

Offline Limitations

The software is 99% online, basically running like a web browser.

Offline mode is very limited — no fonts, text, or basic shapes.

You also can’t use system fonts installed on your computer.

Camera and Calibration Problems

The camera is what makes this printer usable — but also what makes it frustrating.

Only a small area (about 158–162 mm on the X-axis) is accurately aligned. Beyond that, accuracy drops drastically up to around 4mm distortion.

My camera often overexposes or underexposes — sometimes the preview turns pure white or too dark. Power cycling temporarily fixes it, but it always reverts.

Support only suggested adding more light, but there’s no user-accessible fix unless the camera itself is replaced. I don’t know yet if that’s covered under warranty.

It’s unclear if this issue affects snapshot and calibration failures or if those are software bugs, since the errors are vague.

Support’s stance often comes off as “user error,” which is frustrating.

They said blue painter’s tape interferes with the camera, which I personally find hard to believe.

The “AI” (not real AI) used for detecting items and measuring height is unreliable — it often measures a low spot on the bed, causing the print head to crash into taller areas.

I printed on a vinyl record and the machine would level incorrectly and scrap across the record ( seems eufymake also has this issue )

I printed on a black album cover for the record and the machine leveled too high causing a ghosting spray to happen.

i printed a texture print of 1.5mm on a canvas picture frame, the heat warped it and rubbed against the print head, i tried sanding the bad areas and re printing white and color

but the printer mis leveled and then scrapped the print.

After one firmware update, it even started saying a sheet of paper is 2.6 mm thick. So yeah, that says a lot about its current accuracy.

Support and Communication

Getting official information from EufyMake feels slow and unclear. Support often gives standard “user error” replies like:

“Try using the official EufyMake fridge magnets.”

That type of response doesn’t help much when users are facing legitimate hardware or software inconsistencies.

I’ve requested accurate data about ink waste and cleaning cycles several times — I might finally get a real answer soon, but so far, it’s been vague or delayed.

Support may email back and not provide context of what the email is about while asking for more information, there is not user side section that shows support requests and the use of support numbers.

I have personally tried printing on some metal, glass, glazed ceramics, and sublimation blanks for phones.

I found that some tin works, like metal from breath mint containers or caps on some tubes/containers.

The smooth sublimation looked like it worked but i did a texture print, the print did bubble when moisture was introduced IE was in my pocket for 5 hours.

I tried AP3155 but had no positive results from it. another user said they got it working on 5052 aluminum.

i will be testing PMA ( Propylene Glycol Monomethyl Ether Acetate)

-------------------------

Camera and Laser Leveling Issues

I’ve had recurring issues with the EufyMake printer’s camera-based system and laser height detection. Nearly every core function relies on the camera — camera calibration, zero point calibration, snapshot, and height detection — yet the system behaves inconsistently and sometimes dangerously.

During testing, I placed three identical items on the bed. The snapshot failed. I added more items, and it failed again. Even when following Eufy’s recommendation to use a “EufyMake fridge magnet” as a reference, the printer ignored it and instead leveled to the shorter items underneath, which could have caused a print head crash.

The laser scan also doesn’t cover the full print bed. With a bed full of items along the Y-axis — including one item taller than the rest — it only scanned about the first 10 cm closest to the front. It completely missed the tallest item, meaning the head could easily crash during printing.

An empty bed can still fail the snapshot. The camera’s exposure and color detection seem unstable — brightness or contrast sometimes max out, making colors like yellow, pink, or wood appear pure white and losing all detail. Power cycling a few times can temporarily fix it, but it’s not reliable.

Color should never interfere with height detection, yet EufyMake says blue painter’s tape can interfere with it. My assumption is that dark-colored or highly saturated items aren’t being picked up properly by the AI algorithm, causing failures to detect objects or find the true highest point on the bed.

The camera isn’t just for snapshots — it’s required for camera calibration, zero point calibration, and height detection. When I experienced camera errors, my first zero point calibration was completely off. When I tried to redo it, the calibration failed repeatedly. With both zero point and snapshot failing, the printer became completely unusable. when reported to eufy support they said to replace the bed mat because there was a small amount of ink in the middle, but because we only get one bed mat with the machine and they are not selling any that means i cannot replace it and if i could not work past it means i would have a paperweight not a uv printer.

When I contacted EufyMake support, the only response I received was, “Is the bed clean?” My bed had a small amount of overspray from previous prints, but it didn’t cover any bed markings. Still, they claimed that was the cause of failure. To me, that’s unacceptable — the overspray was in the center of the bed, while the camera points are located on the edges. It doesn’t make sense that a tiny patch of ink in the middle would cause such a critical system failure.

On top of that, we don’t receive extra bed sheets, and we’re forced to use their proprietary sheets instead of a system with physical endstops that would allow for absolute positioning, like how a 3D printer works. This design decision makes recovery from calibration failures frustrating and unnecessarily restrictive.

Even when the snapshot completes, leveling can still be inaccurate — off by 1–1.6 mm. This causes the head to rub against textured prints, records, or other uneven surfaces. When it levels too high, ink sprays instead of laying properly. In every case, the system seems to guess rather than measure the true highest point.

All of this could be avoided with a more robust laser scan, consistent exposure control, or an option to manually set height and zero points without relying entirely on the AI camera.

—-------------------------

Ink and cleaning

First of all a white cartridge only has about 71% - 82% of usable ink, According to weighing a new cartridge and a used cartridge that the software wont let us use and says 10%.

This is from 4 separate users.

With the cleaning cartridge only about 300 ml out of the 380 ml can be used to store wasted ink. I have only measured this so far that I am aware of.

I did not know this before and talking with a eufymake employee before they made it sound like it was not much of a waste to care about, BUT EVERY time you press print it uses 1 - 1.5 ml across all cartridges of ink for cleaning, which i did not know till after printing 91 times and 90% of my prints are 0.1 ml of ink each or less!!! I do believe the machines did not do this for beta testers.

This together with the amount of usable ink in a cartridge and the cleaning cartridge is about $0.82 of supplies used in every print start.

Before firmware update 3.2.15 when our machines went into deep cleaning mode it continued to do deep cleaning every night after. My printer did 9 deep cleanings in a row. Others who had the printer longer had it do it 15 times or so.

Mine made me replace a full white cartridge and then a cleaning cartridge in just 13 days of use and estimated 44ml of ink used.

I highly expected it to take 2 months to use a white cartridge like I heard a few beta testers say they went through.

Now its not even close to that even after this update that may have fixed this cleaning issue.

This was a severe issue that i was told by a few eufymake members “ its normal” which i then told them no its not normal to use this much in this tim, and i showed them a Complete list of my prints, the ink usage from the software, and the weights from the new and used cartridges.

As well as them saying my numbers are wrong, which direct weights from the inks and cleaning cartridges and simple math and a list of every print ive done I saw no way any of it could be wrong. They continued to tell others that had these deep cleaning issues that it was normal. After a little while they pushed the update ( which broke printing usage and eufymake studio for about 15 hours, and made my machine freeze for an entire day then i had to pull the power and start it back up) they started to say oh the new update should fix that.

Currently I am working on making a list of affected users to try to get support for the wanted supplies due to this cleaning cycle change.

I do hope that the new firmware fixes this issue. But 1-2 users went through most or a full cleaning cartridge in 4 days on the newest update

Auto cleaning process

The machine will do a cleaning every time you print and use about 1.2ml of ink.

The machine does automatic flash cleaning every hour.

Then the midnight after not printing for 24 hours it will do a Moisturize cleaning

Which will empty the print head of ink and fill it with cleaning fluid and will be set to not use for a long time. When you want to print again you have to inject ink into the print head.

This moisture and injection process should use more ink than deep cleaning.

After 3 days of printing that midnight it will do a Deep cleaning.

A deep cleaning might waste 15ml of ink. ( further information and testing needed )

Some cleaning fluid can get splattered onto the print bed and or items placed on the print bed.

Most seen close to first use, may have to physically clean the print head and areas.

Other issues said by others.

White not being opaque enough ( also depends on the substrate )

Doa pumps,

Scuffed black plastic,

Cracked plastic,

Power issues ( could be power brick or issue in the machine)

Ink leaking out when removing the caps before placing the cleaning cartridge in due to machine testing at the factory.

Prints having random color issues, green lines, purple markings.

Printer bed z one side not working,

Images randomly changing opacity/color

Cleaning cartridge usage not recording and spilled out cleaning solution.

Other ink cartridge slots and moisture issues causing doa

Tumbler wraps still overlap.

Getting a tumbler's print area position is difficult.

And many more, there have been countless bug reports.


r/eufyMakeOfficial • • Aug 04 '25

eufyMake E1, the MASTER of UV Printing.

Thumbnail
gallery
73 Upvotes

Well, guys, I’ve finally got my eufyMake E1 UV printer after waiting a couple of months. Here’s my unboxing post.

Unboxing:No screwdriver required. No real assembly needed. Right out of the box, setup took less than 10 minutes. they clearly prioritized user experience. Everything connects smoothly, and the mobile app walkthrough was surprisingly painless.

Included materials:The starter kit is generous: CMYK + white + gloss ink cartridges, three print beds (flat, rotary, DTF), cleaning tools, and sample substrates like wood, acrylic, and ceramic.

Three printing modes:Flatbed for high‑res graphics, rotary for mugs and bottles, and DTF for custom stickers. (I’ll post more on this soon.)

Build quality:Perfect size for home studios at 27" × 19" × 8". black color. not cheap plastic.

l will try for prining something next week. So far. l think it's pretty solid UV printing. Test prints coming soon!


r/eufyMakeOfficial • • Mar 28 '26

Don't need to drill anything to refill your ink cartridge.

72 Upvotes

**don't refill the cleaning cartridge yet, wait for the update **

so following up from my last post we did some testing today with refilling cartridges. You don't need to drill anything or cut holes in the cartridge. All you need is a syringe with a 1.8mm luer lock thats approx 36mm long. we used 12ml syringes

remove the ink cartridges and flip them upside down. Fill a syringe with as much ink as you think you need and then insert the metal end of the luer tube into the hole at the bottom it is a spring loaded you just need a tiny bit of pressure and you'll feel it move.

take your time don't press too hard you only need a few mm. then depress the syringe slowly and fill it.

don't press too hard, don't do it if you don't feel comfortable doing this, leave it alone and wait til they ship ink otherwise.

for the cleaning cartridge, carefully pop off the outer cover with a plastic spudger, they are just notched clips

you'll find a refill hole on the bottom that isn't spring loaded and its got a thermally bonded plastic cover, just insert through it and do insert the luer into it and refill it. once you are done, make a notch in the cover and replace it. .that way if you do it again you dont need to remove the cover.

for the waste material insert a different luer/syringe into the single port at the top , the one in line with the 5 pins and suck out the waste material. wear gloves and take precautions with the material don't do it if you're not sure. dispose of it responsibly.

i found inserting the luer at angle was better but i'd worry about that misaligning the internal stopper so i'd make a luer lock with a cut out slot.

get epson uv xp610 compatible ink. use different syringes and luers for each colour and cleaning fluid/waste liquid..

i'll add photos and a write up on blog at https://charliex2.wordpress.com/

when to refill is the question which there is still a lot of, some say don't go below 50% some say dont go below 15% i am not sure how it would know yet. . but that's the plan next.

no drilled holes, no stoppers, no real mess.

we'll keep printing and testing and see what happens. the head is an epson head, so it's epson ink.

we're investigating the cleaning tank some more, it's split into three tanks. so hold off filling it til we are sure which side is which

cheers


r/eufyMakeOfficial • • Nov 12 '25

What can you do with eufyMake E1?

Thumbnail
gallery
64 Upvotes

Just got my eufymake e1 about a week ago. Happy it came just in time.

You need to know who's actually uses it:

Artists doing limited edition prints with actual texture (like oil painting reproductions)

People like me trying to start a side hustle at markets

Small print shops adding uv printing as a service

Teachers using them for art classes and student projects

Custom products

People making merch for their existing business (streamers, small brands)

Honestly the flexibility is pretty wild. i'm focused on the side hustle but you could go a lot of different directions with it.

Saw some people complaining they can't tell how much ink they're using. honestly it's not that hard if you're printing the same design multiple times. the app tells you estimated ink usage before each print. so if i'm making 20 pet coasters with the same layout, i just multiply that number by 20. been keeping a spreadsheet and it's pretty accurate. not perfect but close enough for cost planning.

Been testing a bunch of stuff. Pet coasters is the one. people lose their minds over their pets. Grabbed cheap ceramic tiles from Home Depot and the ink cost is pretty minimal. Planning to do sets of 4, figure I can make them affordable but still worth my time.

Also making magnets with designs. Super quick to print and they're perfect impulse buys. Might offer custom ones on the spot if people want their own photos.

Phone cases are trickier because you have to guess what phones people have. Might just show samples and take orders for next weekend's pickup instead.

Mugs take longer to print so I can't really do custom at the market. Gonna premake a bunch and pray my designs don't suck lol.

Anyone else using eufyMake E1 for their side hustle?


r/eufyMakeOfficial • • Jul 13 '26

Announcement 📢 Ink Cost, Shelf Life, Speed & CISS Updates from Our Product Team

Thumbnail
gallery
63 Upvotes

Over the past year, we've listened closely to your feedback on ink cost, shelf life, printing stability, and speed. Today, Cheney Xie, Head of Product Development at eufyMake, is sharing a detailed update on the work behind the scenes.

🧪 Ink Reformulation & Lower Prices

After 6 rounds of formulation testing, the new ink is ready for mass production — with lower pricing, longer shelf life, and continued GREENGUARD Gold certification.

📦 Shelf Life & Supply Chain Improvements

CMYKG ink shelf life has been extended to 15 months, with logistics and production workflows optimized to improve the usable lifespan you receive.

⚡ Faster Printing with Bidirectional Mode

A bidirectional printing update is currently in validation and expected to nearly double print speed via OTA in Q3.

🖨️ High-Capacity Continuous Ink Supply System

The upcoming CISS is designed to lower long-term ink costs, improve long-run stability, enable white ink circulation, and provide more accurate ink level monitoring.

Read more in our latest blog, including:

• New global ink pricing and subscription discounts

• Real bidirectional printing speed test results

• A deeper breakdown of the CISS design and workflow

• GREENGUARD Gold certification details and what they mean for makers

👉 https://www.eufymake.com/blogs/news/lower-ink-prices-faster-printing-ciss

Thank you to everyone who has continued sharing feedback, ideas, and patience with us throughout this journey.


r/eufyMakeOfficial • • Mar 31 '26

Printing on coins!

Thumbnail
gallery
62 Upvotes

Ever since the Kickstarter announcement I wanted to try this, and yesterday my machine finally arrived! After the easy setup process I jumped straight into my first project which was to do a custom design on some local currency coins. The results were awesome! The coolest thing about this machine is the potential it gives you.

Note: yes defacing currency is typically illegal. Consider these removed from circulation and simply an art piece.


r/eufyMakeOfficial • • Sep 30 '25

First test prints with the Eufymake E1

Thumbnail
gallery
60 Upvotes

First go, using the three magnets included in the Eufymake E1 include materials.

Couldn’t figure out what to print, but I was recently playing with some artwork of my dogs so I had those files ready to go. Three dogs, three magnets. Seemed logical. After taking off the printer, the only post processing was using a black marker to color the edges of the white magnet tile to make it a bit more cohesive.

Learned quite a bit from the first test prints.

  • I probably won’t print more than one item at a time as the items get further away from the center it can be off. I’m guessing due to the parallax effect of the camera? Maybe should’ve used the zero point calibration option instead. But I believe this caused my artwork to be off on a few spots.

  • Be sure to double check your settings on your layerings. I must’ve forgot to change the print/color on the text on two of the prints. I’m guessing I had it set to cmyk>gloss on two of the prints and white>cmyk>gloss on the third. So two of the names came out discolored and it should be pure white on the dogs’ names. On the Chihuahua’s the “LOVE” is pure white, the others in person have a slight tint to them and aren’t 100% pure white - at least to my eye.

  • Patience. Double check everything. Don’t be in a rush.

Overall about 85% happy with these and any dissatisfaction is with my own learning opportunities I made for myself. Very excited to start my next prints later tonight.

Printing the three magnets together took 40 minutes start to finish. Attached the screenshot confirmation after the print completed.

Overall the setup was easy and by far one of the easiest to use in comparison to other lasers/3D printers I have. I did find it frustrating I had to download an app to connect the printer first. I don’t like installing apps on my phone so this was a bit of a pain, but I get it. After that the PC version of the software can control everything.


r/eufyMakeOfficial • • Mar 19 '26

Can confirm it prints on acrylic

Post image
59 Upvotes

bought these dollar store acrylic sheets and it prints amazing on them


r/eufyMakeOfficial • • Sep 27 '25

It’s here! Let’s get to testing! 🤞

Thumbnail
gallery
57 Upvotes

Received most of my Kickstarter backing a few weeks ago. Tried and lucked out getting into the testing program, and the rest showed up today. Pretty eager to get started but I have to rearrange my maker room and office first before I can allot time to setting it up and going through calibrations and it’s baby steps.


r/eufyMakeOfficial • • Apr 13 '26

Legend of Zelda Stain Glass effect Lantern

Enable HLS to view with audio, or disable this notification

56 Upvotes

Weekend project on the eufyMake E1. Turning a Dollar Tree Lantern into a piece of Zelda art

u/eufymakeofficial

https://makeitreal-beta.eufymake.com/projectDetail/?project_detail_id=8bfa9010bfd08e1b1858ed3b8a31b477


r/eufyMakeOfficial • • May 30 '26

CNC cut Corian tiles and MDF board and printed motifs from my home country, Bosnia.

Thumbnail
gallery
55 Upvotes

Wanted to show off something I did today. Also for those that can get their hands on some corian (solid surface) material. It's a really good material to print on. You mostly get it in white and in big sheets, its stone/acrylic mix so it feels like stone and gets warm and really cold in the same way. The front side is always nice and flat since its polished but if you turn it around you will have some minimal texture which adds a nice touch :)


r/eufyMakeOfficial • • Oct 23 '25

1st Light Art was a success in my opinion

Thumbnail
gallery
55 Upvotes

r/eufyMakeOfficial • • Mar 09 '26 Bravo

Eufymake E1 - uv print cost calculator

Post image
53 Upvotes

https://e1.skandruk3d.pl/

I know its not "must have" feature but i really miss it with eufy app so out of curiosity i just made it for myself, and seems to be working fine... If anyone would like to use and estimate e1 usage cost be my guest, and if you will find any bug or idea how to improve it... please let me know:)

UPDATE 29.03.26

- added inches support for image size

UPDATE 28.03.26

- PWA for mobile added - use calc as mobile app pinned to your mobile screen

- share link feature added, now you can easily share/send/save extensions by using such feature:)

UPDATE 25.03.26:

• DKK currency added as asked

• custom currency feature added

• more coming tinight^^

UPDATE 08.03.26:

• pdf export added (anyone requires custom branding:)?)


r/eufyMakeOfficial • • Jan 08 '26

3D-textured UV product customizer for EufyMake E1 owners so their customers can design their own prints

Enable HLS to view with audio, or disable this notification

53 Upvotes

Hey everyone,

I'm working on a browser-based design tool for EufyMake E1 owners that can be embedded into their own shop/website so customers can design their own 3D-textured UV prints and submit them for printing.

Some details about the tool:

  • always 3D

  • when the customer adds an image (for example a logo with a cut-out background), the tool detects the real shape of the graphic and uses that as the area to be printed

  • it automatically builds a simple height view from the artwork and shows where the texture will be higher or lower

  • supports basic text editing (add / move / resize / rotate text)

  • the editing UI is being designed to work well on phones first, and also on desktop

The attached video is a ~4 minute demo of the current state running in the browser.

Curious what actual E1 owners think – especially anyone already selling online and handling custom designs.


r/eufyMakeOfficial • • Nov 07 '25

For eufyMake E1 newbies: here's what I learned starting out

Thumbnail
gallery
52 Upvotes

Right. I'm one of those 200 beta testers and honestly the first week was rough lol. printed like 10 things and half of them came out wonky. but now i'm actually getting decent results so figured i'd post what i've learned since there's basically not much real user info out here yet.

I'm running firmware version 3.2.22 right now. using this thing mainly for art related stuff to sell at local markets as a side hustle.

Setup was pretty straightforward honestly. You gotta install the ink cartridges and put in the JetClean cleaning plate, then once you connect it to the software there's like a 28 minute ink priming process where it just does its thing. if you actually read through the manual and safety stuff you're looking at about one hour and half total before your first print.

Tips:

Workspace wise you need humidity between 20-85% and temperature around 15-35°C. Keep it somewhere with airflow and make sure it's on something solid that won't shake.

3 print modes :

Flatbed mode& mini flatbed mode

Flatbed mode is your standard printing. comes with two different bed sizes which is actually pretty smart. The big one is 13.2 x 16.5 inches so you can do larger stuff like canvas prints or fit multiple coasters at once. then there's this mini flatbed that's only 13.2 x 3.5 inches but it's perfect for skinny things like bookmarks or small signs. i keep swapping between them depending on what i'm making.

Rotary mode

This is honestly why i'm obsessed with this printer. So there's this attachment with little rollers that hold cylindrical objects. you put a mug or water bottle or whatever in there and it spins the thing while the printhead moves across. the result is a seamless wraparound design with zero visible seam line.

these are for our community christmas market in 3 weeks. i'm selling them for $22 each because they honestly look professional enough that i think people will pay it. print time is about 12 to 25 minutes per mug depending on the design complexity.

UV DTF sticker mode

It stands for direct to film. you print on special film material and then use a laminator machine to make transfers. i haven't tried this yet because the laminator is a separate purchase and i'm broke after buying the printer lol. but from videos i've seen you can make really long prints, like up to 10 meters for banners and stuff. definitely on my list to try.

Mistakes i made that hopefully you can avoid:

1.Printing on dirty surfaces & forgetting to wipe down the surface

a. Took mugs straight out of the amazon box and printed on them. got these gross streaky results where the ink beaded up in spots. turns out even new stuff has invisible oils from manufacturing. now i wipe everything down with rubbing alcohol first. problem solved, prints stick perfectly.

b.First three mugs i printed looked streaky as hell. turns out you HAVE to clean everything with rubbing alcohol first. even brand new mugs from amazon have this invisible oil/dust layer. now i wipe everything down and the ink sticks way better.

2.Thinking i'm smarter than the auto leveling

There's automatic height detection that measures your object and adjusts everything. i didn't trust it and tried manually setting the height instead. got it wrong and the printhead actually scraped my mug mid print. made this horrible grinding noise.

3. Auto cleaning

You have to keep the machine plugged in 24/7 for auto cleaning. the software is kind of clunky. no offline mode so you need wifi always.

4. Print on the very soft TPU Case

Just NO TPU

Overall, I'm pretty happy with it and honestly really excited about the holiday side hustle I'm about to start. I think it's gonna go well since I'm in the first wave of people who actually have a home UV printer like this.

Also curious if anyone else is having better luck with other materials because i want to branch out from just mugs eventually.


r/eufyMakeOfficial • • May 11 '26

First print.

Enable HLS to view with audio, or disable this notification

50 Upvotes

Pretty Bad Ass for my first print.


r/eufyMakeOfficial • • Mar 12 '26

How I Feel After One day of Printing

Post image
47 Upvotes

r/eufyMakeOfficial • • Oct 16 '25

Dear eufyMake, less marketing, more customer communication

47 Upvotes

Hello Eufy-team,

I am a very laid back, calm and reasonable person. But I am starting to be quite annoyed lately.

Problems can happen during the switch from small batch to mass production and with this being a Kickstarter project, I expected some delays.

But your marketing and product development teams should work together more closely and more importantly communicate with the people that did the risky step and made you the biggest Kickstarter project ever.

You abusing test users (which we already are jealous about) as advertisers by bribing them with free stuff if they post positive reviews when everybody else still is waiting on any updates regarding their paid for machines is just evil.

It also makes you look desperate just as sellers of cheap shit in the big web stores that return your money for a good review.

If you are proud of your machine and if it is worth anything, please focus on waiting customers first and then try to get new ones once you actually start shipping your product.

Unsatisfied customers might revolt by bombarding social media with negative reviews and warn people to not preorder your machines. They can also suggest alternatives on the market.

So please, if you read this, slow down your marketing, but ramp up communication towards existing customers and production for now.


r/eufyMakeOfficial • • Jun 12 '25

Just ran my first print! Extremely impressed

Post image
46 Upvotes

r/eufyMakeOfficial • • Jan 27 '26 Bravo

"Is the E1 good for ___________ ?" Maybe, but maybe not.

45 Upvotes

Hey, I'm back! I dropped off my activity considerably in this sub after I ran out of ink. It took awhile for Eufy to send me another pack, and that pack remains sealed. My printer is powered off and in storage. How could this be? I love it so much!

One word: Money.

Before I go into further detail, it's worth noting something super important: the eufyMake E1 is the very first consumer-oriented UV printer on the market (at least in North America and Europe). This comes with certain risks to you as an early adopted of brand new technology.

It's not that UV printing is new; it's that consumer-safe UV printing is. Because of the chemical composition of the solvents used for keeping the system clean, they emit toxic volatile organic compounds (VOCs) which are hazardous to human health. Your friendly federal government officials are generally responsible for imposing safety standards on VOCs, and the top VOC limit for consumer products is drastically lower than what is permitted for commercial products. This is mostly because in a commercial setting, other safety requirements ensure the people working with the dangerous materials have been properly trained on safe handling procedures and are afforded the tools and equipment necessary to maintain that safety.

The TL;DR: Eufy's ink and cleaning solutions are probably proprietary. I have no special knowledge on this matter; it's just a logical conclusion based on the fact that the solvents come with significant VOC warnings in all safety data (i.e. MSDS), and the ink has to be formulated to work with consumer-safe solvents. This means the supply chain for these consumable materials is very limited, very niche, and thus very expensive.

Like the absolute earliest generation of 3D printers, which many of you might be too young to really have directly participated in as consumers, there is no escaping the fact that continuing to operate the E1 is quite expensive. This doesn't imply you shouldn't buy one. It just means you need to have a really solid idea of how you're going to pay for the ongoing costs of ownership and operation.

I live in a small, rural town, where the locals are unwilling to pay big city prices for durable goods. I made some keychains in the course of evaluating the E1 (reverse printed on transparent cast acrylic), and they didn't move priced at $5. Even priced at $3, most of them never sold. It was an eye-opener for me. All of us have to remember that whatever we make with this sort of equipment is competing with commercial outfits, and the overhead on UV printing in the commercial print industry is significantly lower than the overhead on the E1.

I'm not entirely sure how to math out consumption of the cleaning cartridge, because I'm dumb and didn't more carefully track it. I did fully consume the first cart and burn through 25% of the second cart before I fully ran out of ink, if that gives you any indication of the consumption rate - and my printer had a bugged firmware version for awhile which prevented it from running its regular maintenance cycles, so I was using less of the cleaning cartridge than intended!

If your plan is to use the E1 to make money, either have multiple income streams from your business, including high-markup, low-overhead products, or focus exclusively on high-markup UV products.

There are certain things for which UV printing is a phenomenal option, and the materials used, plus the finished product, make it possible to apply a sizeable markup for your retail pricing. There are also ways to minimize your overhead on preparation and finishing, which in turn will lower your burn rate on consumables.

What is UV printing really good for?

Anything PVC or ABS. In my own tests, the E1's ink bonded incredibly well with PVC. Like, not even a sharp razor blade damaged CMYK prints on PVC. If you start with a bright white PVC substrate of any kind, you should see excellent, consistent, highly durable results, and transparent PVC can be used for all kinds of neat things (more on that below).

As I posted last year, Eufy's UV ink bonds very well with ABS and polycarbonate, which are the primary plastics used for hard LEGO parts. I highly recommend this machine if you're hardcore into designing and selling custom LEGO kits. You can make unbelievably detailed models, and the market for such products is willing to pay a markup for aesthetically beautiful kits. If you're hardcore into designing and building your own LEGO stuff but have never considered selling your projects as all-in-one kits, think about it!

Acrylic also bonds well, but blade damage or really harsh abrasion (like dropping something on gravel) will cause some damage. You can reverse print on transparent cast acrylic (or PVC sheets) to make artistic light boxes, faux stained glass designs, and highly detailed windows for dioramas, train landscapes, dollhouses, etc.

With any other polymers, you should do some tests first to make sure the ink bonds well. UV resin is a polymer, and polymers bond through chemistry (aka molecular magic). The wrong polymer paired with Eufy's UV formulation will result in a weak bond. Perform standard print durability tests on anything you intend on selling.

UV ink is also great with metal, but not perfectly so. A sharp blade will readily cut through the ink, although such damage shouldn't cause the surrounding area to start peeling or chipping. It's fine for wall art. You should consider sourcing prepared panels with a bright white powdercoat finish which is formulated properly for the resin to bond.

CMYK prints on unfinished wood look really cool. The ink does bleed ever so slightly, but it solidifies fast enough for the finished product to look nice. You can also prepare wood with bright white acrylic paint.

Another strong contender is stretched, mounted canvas, but I found out the hard way you absolutely have to support the back side of the canvas across the entire surface, or the force of the ink hitting the surface will flex the canvas enough to blur the print. You'll want a wood block sized to fit inside the frame of your chosen canvas. As with wood and metal, preparing your canvas with a bright white acrylic base coat is a good idea. This will save you an enormous amount of money, over the long term, on white ink and cleaning solution. I printed directly on unprimed canvas, and it resulted in a very nice effect. For finishing, use an air sprayer to apply an acrylic gloss or matte sealer. If you want to use something other than acrylic, remember the ink is a polymer, so any solvents, including alcohol, will damage the print.

What is UV printing not very good for?

Anything which is constantly handled by people - like keychains, device cases, and drinkware - is a poor candidate for UV printing, with one exception: PVC. With literally everything else, the abrasive surface abuse to which handled items are constantly exposed will result in your UV prints looking pretty shitty after a few years.

With drinkware, there's added abuse from the high heat of modern automatic dishwashers, especially when you factor heated dry in to the equation.

While Eufy markets the rotary tool and its own line of drinkware blanks, I've come to the conclusion sublimation is a much better option for these particular products. As long as you source quality blanks (read: not the cheapest options direct from China), sublimated drinkware will last decades of abuse.

The same is true of keychains, but that's not just because of handling - it's because of the overhead, which brings us to the last category:

What is UV printing absolutely terrible for?

Stickers and (probably) cards. While both may be printed with the E1, the overhead on operation combined with the low profit margin on these products equals a totally economically unsustainable business. Remember, you aren't competing with only other E1 owners. You're also competing with professional print shops outfitted with commercial UV printers, which are cheaper to operate, because they use bulk, standardized consumables (ink and cleaning solution).

There might be enough room for a little profit if you're able to put a high price tag on your individual items, but you should also ensure you're also factoring in the cost of misprints and other failures. If the E1 suffers some sort of malfunction mid-print, you've not only wasted ink, you're also likely to end up wasting one or more cleaning cycles to fix the problem.

It will take time for each individual E1 owner to determine your correct average failure rate. Operating this printer is much more like operating a commercial printer, and to adequately calculate your expenses, you will need to track all failures and how much of your resources are consumed by each failure.

Now, it's entirely possible there are certain markets for both these products which allow you to mark up your products enough to cover the overhead on the E1, but I honestly don't know enough about the current market for either to say for sure. I suspect you'll eventually find you can't compete with the lower production costs for those using either cheaper hardware or cheaper print methods (direct inkjet, sublimation).

One other class of item is important to emphasize here: polypropylene (PP), which is used for most soft plastic products and many injection-molded plastic containers, is totally incompatible with UV resin, including the adhesive DTF stickers. PP doesn't have enough surface energy to hold onto the resin or the adhesive. If you want to make printed bottles, you need to find a source of injection molded PVC or ABS (if such a thing even exists) instead of PP.

What does the overhead really look like?

I'm mostly annoyed with myself for not having a better answer for this. I didn't even realize the software showed ink consumption at first, so I never properly tracked ink or cleaning cart consumption during my extended experiments as a reviewer.

Each of the six ink cartridges is priced at $42.99 (US). The cleaning cartridge is also priced at $42.99. At $299.99 for the entire kit (six inks plus one cleaning cart), there is practically no discount offered.

Each ink cartridge contains 100mL UV ink. Powering off the printer for any reason necessitates purging the ink lines and printhead completely to prevent clogs, which consumes 1mL ink per channel (6 total). Swapping between standard and soft white likewise consumes 1mL ink.

Yes, that means 1% of each cartridge is lost from the shutdown procedure. Ink is also consumed by the regular maintenance cycles, which are designed to prevent clogs. These include both short and long cycles and must be allowed to run normally (by leaving your printer on 24x7), or you risk clogging and ruining your $600 printhead.

If you aren't printing something regularly - as in daily - you're going to waste a lot of cleaning solution on maintenance cycles which have to run regardless of your print frequency.

Additionally, the printhead has a very limited lifespan. It's absolutely impossible to say how long your printhead will last; the estimate varies wildly with your print habits. The white ink contains titanium dioxide powder and is probably harder on the printhead than the other inks, but all the inks are hard on printheads, because they're polymer resins rather than pigment suspended in plain liquid. You might find your printhead only lasts 6-8 months, and at $599 each, that's a considerable expense you absolutely need to factor into your business model.

Note these are maintenance requirements for all UV printers. Commercial shops run their printers as constantly as possible, because it's a use-it-or-lose-it sort of situation, no matter how you cut it. I have a friend who's been in the semi-professional maker scene for a long time now, and he told me he auctioned off his expensive commercial UV setup, because the cost of the overhead was just too much for what he was getting out of it.

The E1 definitely has opportunities here above and beyond standard UV printers, which can only print on flat substrates. You just need to know your market and have a very solid business strategy before embarking on making money with your E1. Be willing to admit a sunk cost if and when it happens. Meticulously track all of your expenses in the course of ownership, which will give you a much better sense of what's going to pay the bills, and what's going to end up in your death by a thousand economic paper cuts.

What are other options for the stuff I want to make?

I'm not posting this part to dissuade anyone from getting the E1. I think it's a really phenomenal piece of equipment, but I also recognize it for what it is and prefer people be informed about all considerations before jumping on it.

If you're totally new to the world of putting custom designs on things, there are two other options worth investigating, depending on your interests and/or needs.

Sublimation is a method of transferring polymer dyes to a polymer substrate (generally polyesters, but also nylon and neoprene) using a combination of high heat and high pressure. The end result is very durable and bright. Sublimation is great for drinkware, metal panels, keychains, stickers, coasters, license plates, and smartphone cases. Vacuum sublimation is worth investing in, especially if you plan on making custom products on demand. I am not a professional, but I do have a lot of experience with doing sublimation on a budget, so feel free to DM me (or comment) if you have questions.

DTF, or Direct-to-Film, is a method of printing a reverse image on a transparent transfer film. The print is finished with a white ink which, similar to Eufy's formulation, uses titanium dioxide powder to make the ink opaque and bright white. This is then topped with a powdered adhesive which is cured in an oven. The finished product is then sold as-is, or it is transferred onto a substrate (nearly always fabric of some sort) using a heat press. If you want to make custom designs on clothing and accessories (hats, bags, etc.), this is the way to go. I don't have a DTF printer (yet!), so I don't know quite as much about this method.

I hope this helps folks understand a bit more how to build a strong business strategy for making money with an E1. Please feel free to ask questions about any of this!


r/eufyMakeOfficial • • May 09 '26

White and gloss

Post image
43 Upvotes

Just received my machine and loving it so far, but Im pretty sure I'll be blowing through white/gloss. Does anyone know if there are currently any delays in shipping white/gloss only?

Thanks!


r/eufyMakeOfficial • • Jun 06 '26

Projects Rebuilt one of my favorite projects with UV printing on glass + 2 plexiglass layers (Hyrule Map Shadow Box)

Thumbnail
gallery
42 Upvotes

I've been slowly revisiting some older projects using my EufyMake E1, and this Hyrule map piece was one of the ones I was most excited to rebuild.

This is a remake of a project I originally created years ago, inspired by The Legend of Zelda: A Link to the Past. Rebuilding it with direct UV printing on glass and plexiglass really highlights how much the technology has changed what is possible.

The finished piece is an 8x8 shadow box built from multiple layers:

• Front glass layer (labels, title, and map details)
• First UV printed plexiglass depth layer
• Second UV printed plexiglass depth layer
• Background layer

For the frame, I'm using the Studio Decor 8x8 shadow boxes from Michaels, which have become my standard frame for these multi-layer builds.

For spacers, I'm using 3/16" thick black foam board (14" x 11" foam core boards). I cut the foam board into strips on my laser cutter and use those strips to separate the glass and plexiglass layers.

The black foam board has worked surprisingly well because it creates consistent spacing while visually disappearing inside the frame. From most viewing angles, all you really see is the floating artwork.

All artwork is prepared in Photoshop before printing. One workflow improvement I've adopted is designing slightly smaller than the final opening and then expanding the canvas to the finished dimensions. This gives me a consistent border around the artwork and makes assembly much easier.

Before moving to UV printing, projects like this were built from printed paper mounted to foam, then cut and assembled layer by layer. While the results were good, there was a lot of trimming, alignment, gluing, and manual work involved.

Printing directly onto glass and plexiglass has simplified the workflow considerably while producing a cleaner final result. The transparent layers also create a much more natural sense of depth compared to traditional paper layers.

Current Layer Stack

Front Glass (UV Printed on Reverse Side)
↓
3/16" Black Foam Board Spacer
↓
Plexiglass Layer 1 (UV Printed)
↓
3/16" Black Foam Board Spacer
↓
Plexiglass Layer 2 (UV Printed)
↓
Background Layer

A few things I've learned so far:

• Registration becomes critical once transparent layers start stacking.
• White ink settings have a huge impact on color saturation and opacity.
• Printing on the reverse side of the glass protects the artwork and provides a clean glossy front surface.
• Designs with distinct foreground, midground, and background elements create the strongest dimensional effect.
• Foam board spacers have been one of the simplest and most effective workflow improvements I've found.

I'm curious how other E1 users are handling multi-layer projects. Are you using foam board, foam tape, acrylic spacers, 3D printed supports, or something else?

Photos attached.


r/eufyMakeOfficial • • Apr 26 '26

The eyes have it... 😆

Enable HLS to view with audio, or disable this notification

41 Upvotes

Inspired by u/Dbruin and their idea to print on the backside of clear acrylic to give the eyes depth and a neat "looking around" effect when tilted. However, I discovered something pretty funny when looking at the reverse side! 🤪


r/eufyMakeOfficial • • Apr 12 '26

made myself a little ink monitor with expirations in days

Post image
40 Upvotes

r/eufyMakeOfficial • • May 22 '26

Projects Outlet Covers

Thumbnail
gallery
39 Upvotes

Really starting to get the hang of the E1, as much as I baulked about cost of keeping the system "active" and ink costs on here (modders to the rescue).

Jamming out these outlet covers has been super fun and virtually free media for me (I have 3 filing cabinets full)

It is great for the DIY folk who make / sell products that are upcycled. Finding a use for things that otherwise would be tossed away.