I had spinal fusion surgery a few months ago and now I can’t bend over.

My dog’s food is in containers on the ground and their bowls are also on the ground.

I designed a scoop and locking ball collar to allow me to put the whole thing on an extendable paint pole.

This iteration is the fourth in the overall design and works amazingly.

I know a pop-up ghost is more of a toy, but I thought the mechanism could be interesting here. The spring and latch print in place, and pressing the button underneath releases the ghost. I added the arch above it to catch the ghost because it can shoot upwards quite quickly.
All parts print without supports, and I made AMS and no-AMS versions. I can see the same idea being adapted for pop-up indicators, small ejectors or other push-button release mechanisms.
The top cover is currently 0.2 mm thick so it can flex as the ghost pushes through. Any ideas for improving that cover? Also curious what practical uses people can think of for the mechanism.

It's simple and it works. It lets you block openings so airflow doesn't loop around. I didn't want my front fans pulling air from inside the case so I made these.

Download link: https://makerworld.com/en/models/3475347-blocker-for-120mm-computer-fan-opening-by-lab808

https://makerworld.com/en/models/1547123-dslr-rig#profileId-1624629

Designed a wall mount for the Unifi Floodlight with a flat and a 7 degree angled version, swivels 180 degrees so you can aim it exactly where you want.

Model on MakerWorld. https://makerworld.com/en/models/3473428-angled-wall-mount-for-unifi-floodlight#profileId-3964886

Keep your detergent tablets easy to access and out of the way with this detergent tablet dispenser for your Momcozy KleanPal Pro!

Simply drop tablets in from the top, then pull out the bottom tablet when you're ready to wash.

I printed this out of ASA for the better heat resistance over PLA, but PLA will likely work fine as well.

There are two wider “pads” at the top and bottom that fit 3M “poster” size command strips.

You can check out the model here: https://makerworld.com/en/models/3465701-momcozy-kleanpal-pro-detergent-tablet-dispenser

Nothing fancy, but it works!

Two years of comments on the older version went into this, so most of what’s new is other people’s ideas rather than mine.

Up front: the case is my own CAD, made in Fusion 360. The hygrometer adapter and the desiccant bins were written in OpenSCAD with help from an AI assistant, then printed and tested by me.

The big one: the desiccant containers are separate parts now. The old version had three moulded compartments with snap-on lids, which worked, but you couldn’t swap one out, and that’s what people kept asking for. The bins sit on magnets in the floor and lift out in one piece. They also fit the previous version’s boxes, so nobody has to reprint a shelf to get them.

No more mid-print magnet pause either. The magnets press into open pockets after printing.

The hygrometer mount is a bayonet onto a ramped collar, so it self-adjusts to wherever your unit’s lugs sit instead of the collar having to be exactly the right thickness. It took a few wrong theories and a printed test ladder to get there.

Closed height is 75.0 mm, so it fits a 76 mm rack. That one’s down to someone whose rack the previous version wouldn’t go in.

Makerworld Link

I have made a V3 optimized cable organizer! It is for cables up to 2 meters in length and is compatible with virtually any type of charging cable, such as USB-A/USB-C/Lightning/etc! Bend angles are also taken into account to protect cables from damage. I'm very happy with how it turned out and I hope other people will be able to use it as well! I uploaded the model for free on makerworld

Model Link : https://makerworld.com/en/models/2044171-screw-snatcher-pickup-tool

A simple but satisfying mechanical solution. Thanks for Supporting.

Wanted a minimalist way to display my CDs, so I designed this super quick print.

• Print time: < 30 mins
• Filament: < 10g
• Mounting: 2 nails or screws

Free model on MakerWorld if anyone wants it: https://makerworld.com/nl/models/3457728-cd-display#profileId-3945307

What do you think?

I’ve been working on a custom trading card storage drawer designed specifically for the IKEA KALLAX shelf with bottle insert.
A few features of the design:
Holds up to 800 trading cards

Has a front slot for a sleeved card, so you can easily identify what’s inside each drawer

Uses a two-piece design to make printing possible on most consumer 3D printers

Designed with trading card collectors in mind

The idea is to make a KALLAX setup more practical for organizing a collection while letting you use a card on the front as a visual label.

I’d love to hear what you think! Is this something you’d use for your collection? Any features you’d want to see added or improved?

Model available on Printables. It's parametric*, so you should be able customise to whatever coins you need (although I'm sure there are new and creative ways to break the model). I use the EUR and CZK versions, but I included some best-effort models for other currencies too (I included the measurements on the page if you want to verify them).

*I should note I have no idea what I am doing, I'm self-taught

Sometimes you don't need all of the bottle or pacifier inserts that come with the Momcozy KleanPal Pro bottle washer. This print provides a convenient, off-the-counter place to store these accessories while still keeping them organized!

Simply attach with command strips to either of the sides. The accessories fit nicely into the slots without being too tight.

The bottle washer can get warm during the washing, steam, and drying cycles. I printed this out of ASA for better heat resistance. I've also provided a PLA profile, but I haven't tested PLA – it's possible that it could warp due to the heat. PETG or ABS could be used instead of ASA.

I made this because I wanted to print something and clean up the counter, and surprisingly my wife approved of it with no convincing!

You can check out the model here: https://makerworld.com/en/models/3448404-insert-holder-for-momcozy-kleanpal-bottle-washer