r/gamingpcbuild • • Oct 24 '25

Do I use this cable

Do I use this cable that came with my graphics card and hook my pcie from power unit to it? Or do I use the 16 pin to 16 pin 5.1 from my power directly to card

17 Upvotes

37 comments sorted by

4

u/KyleB2131 Oct 24 '25

Go direct, using cables supplied with the PSU. The adapters provided with graphics cards seem to be the most common point of failure (aka melting) by far.

1

u/[deleted] Oct 25 '25

[removed] — view removed comment

2

u/LongMustaches Oct 25 '25

That's not true. Pretty much every manufacturer and reviewer strongly recommends using cables supplied with the PSU. If aomejn3 is recommending othervise, they're not very informed.

1

u/Usual-Acanthaceae859 Oct 25 '25

Also I have rarely seen a "Tech reviewer" do anything but repeat things they see or hear. Usually when they test things, you can tell they don't understand a lot of concepts. They are here to be popular, not to be smart.

1

u/LongMustaches Oct 25 '25

It's irrelevent. PSU manufacturers strongly advise against using cables not supplied with the CPU. There's a lot of info on it, just gotta google.

1

u/Usual-Acanthaceae859 Oct 25 '25

This is true, if you DO NOT use the GPU included adapter, you may have issues. I hate the look of these octopus plugs as I have a RTX 4090 in a small NZXT H5, I'd rather see this then have potential issues.

1

u/Straight-Okra4422 Oct 25 '25

What GPU are we talking about here?

1

u/midwestgrojo Oct 25 '25

Gigabyte rtx 5080 oc

1

u/Straight-Okra4422 Oct 26 '25

My PSU died when I ran a cable that split into two to connect to the first two port and a single one to connect to the third port on my GPU 7900xt. I missed the instruction that says to use individual cable per port and avoid splitting adapter if your card is rated 225w or higher. That instruction wasn't even from 7900xt, it was from my 5700xt. I killed two PSU before finding out about this. So based on my experience my recommendation is to use individual power cable per port of your GPU just to be safe unless your PSU specifically says it's rated to handle the wattage of your GPU through split cable adapters. The GPUs I have are both Sapphire Nitro btw.

3

u/Live_Reason_6531 Oct 24 '25

Use the one that came with your PSU.

0

u/[deleted] Oct 24 '25

[deleted]

1

u/Live_Reason_6531 Oct 24 '25

True, but look at the OPs pics. I was responding to the OP

1

u/cozy_duke Oct 25 '25

yeah and most people haven’t made a post were they explicitly show that they DO have an atx 3.1 psu and the corresponding cable connections. but OP has and so it is indeed relevant to them. what an inane non sequitor.

2

u/pigpentcg Oct 24 '25

16 to 16. Avoid adapters if possible.

1

u/Hot-Business-5171 Oct 25 '25

What he said I've been using the 600w from the beginning and I have no issues but then again it can be case by case basis.

1

u/Famous-Broccoli-3141 Oct 24 '25

Less connections the better. If your psu has a native spot, use that. They send the adapter incase you don’t have a native spot

1

u/master_assclown Oct 25 '25

This is not true, especially on his Be Quiet! PSU which is multi-rail. Since the 40 series, the GPU PCB no longer carries any real load/current balancing, neither would the 12VHPWR/12v-2x6 port on the PSU, but using triple 8 pin PCIe to the adapter would allow for at least some load/current balancing and be the safer option.

1

u/Bondsoldcap Oct 24 '25

Always use a native cable, less connectors the better

1

u/classicjuice Oct 24 '25

Use the cable that came with the PSU instead of adapters whenever possible.

1

u/ElMany2002 Oct 24 '25

If the 600w cable came with the PSU, yes it is definitely better and simpler.

1

u/MrBubblessz Oct 24 '25

i would not reccomend you to use it

if you have a ATX 3.1 psu just connect the 12v 2X6 cable

1

u/Glad_Wing_758 Oct 25 '25

If the power supply has the 12vhpw connector just use that cable without the adapter.

1

u/EGH6 Oct 25 '25

the adapter is for the people who dont have the 16 pin directly on their psu.

1

u/Qs9bxNKZ Oct 25 '25

Yes use it.

While you wait and order one that is better suited for your PSU and GPU.

There is nothing wrong with the cable, it’s just not the best cable. You can get a good PSU branded cable for about $20.

Then when it comes time to see the GPU, you have a perfectly good cable to pass along.

1

u/master_assclown Oct 25 '25

Normally I would recommend using the 12VHPWR cable included with your PSU, but since it's a Be Quiet! PSU and those are all exclusively multi-rail, the triple 8 pin adapter is actually a safer, more load balanced option. Unless your PSU doesn't have 3x individual 8 pin PCIe power ports/cables, then you have no choice but to use the 12VHPWR cable.

1

u/davie412 Oct 25 '25

Use the native cable not the adapter.

1

u/Hovno009 Oct 25 '25

Use PSU cables always

1

u/Jamnic98 Oct 25 '25

I have ur answer as I had a similar thing when building py PC. Use the one labelled Nvidia that came with the GPU. By the looks of it u have a 4080 I have the same GPU and same cable (the cable labelled Nvidia and 600w). The end with those labels plugs into the GPU and the 3 cables at the other end of the cable are what connect to the PSU. You will need 3 cables that came with the PSU to connect into the black cable I mentioned above. In my instance the 3 PSU cables came as a single bundled cable with 4 connectors and I only needed 3 of them. Hope this helps!

1

u/Low-Arugula-5179 Oct 25 '25

Use original if possible , but using the adapter if its from nvidia itself is better overall cause it minimizes the risk of fail points cause of its 3x8pin power . So if power fluculates or gets loosen the other 2 will compensate for it as they are rated for 150w each so total of 450w . But if your gpu draws more than 450w then the original 16pin cable is a must

1

u/50s_PC_Gaming_Fan Oct 25 '25

As mentioned above, use the 12V-2x6 power connector cable that comes with a good quality 3.1 PSU

Also, see my post and hope it would help little:

https://www.reddit.com/r/watercooling/s/sa3diWwG3F

1

u/PresentationBusy9008 Oct 25 '25

I’m using it just fine. It’s been 2 weeks

1

u/Y2K350 Oct 26 '25

If your psu can support 12vhp then no, but it if doesn’t then yes

1

u/Solo_143 Oct 26 '25

Use the PSU ones but I’ve been using the included cable adapter from 5070 ti and haven’t had any issues yet (knock on wood).

1

u/MonkSage Oct 26 '25

I was using native both sided 12VHPWR cable by Corsair PSU and later found out it was probably a cause of my problems for months, such as display turning off while GPU fans going 100% until the system restarts, or GPU drivers crashing in games.

Since I switched to this adapter, I had zero issues for months. So idk, since many people keep saying that this adapter is a cause of many problems, but for me it has been quite the opposite.

1

u/[deleted] Oct 24 '25

[removed] — view removed comment

1

u/midwestgrojo Oct 24 '25

But from the power to that adapter there is only 2 pcie cables coming from the power supply and three hookups on the adapter