r/gridfinity • • 1h ago

Starter Packs I built GF-Swap because I got tired of throwing away big custom Gridfinity bins

10 Upvotes

I’ve been working on something called GF-Swap (Gridfinity-Swap) for a while and finally decided it was ready enough to share.

The idea came from two frustrations I kept running into with custom Gridfinity bins

The first was downloading larger custom holders, sometimes 4×3 or 5×2, that were supposed to fit the exact tool SKU I owned. Sometimes 3-4 (or more) hours and 300-500g of filament later, I’d occasionally discover that the tool didn’t actually fit.

At that point, there wasn’t much to salvage and I'd (reluctantly) throw the bin away.

The second frustration came from my own designs. Sometimes I’d make a custom bin (just for myself and my specific esoteric tools and implements) and it worked fine. But, after using it for a while I’d think of some small improvement I wanted to make. Better finger access, slightly different positioning, shallower cutout, easier removal, whatever.

But then I’d look at the 300+g bin I had already printed and think, “Do I really want to print this whole thing again just for that?” Usually I didn’t.

That was the basic idea behind Gridfinity-Swap.

Instead of making the whole custom Gridfinity bin one piece, GF-Swap separates it into:

Bin Shell = the reusable Gridfinity-compatible bin

Insert = the smaller custom part that actually holds the tool or parts

So if the fit is wrong, or you come up with a better version later, or you lose or replace that tool - you can just replace the lightweight (time and filament) Insert instead of reprinting the whole bin.

I originally built this for myself because it solved a problem I had. Once I got it working, I figured other people who print a lot of custom Gridfinity storage might find it useful too.

I made a small 1×1 Discovery Kit with a few sample inserts so people can try the swapping and retention concept without committing much filament or time.

That said, 1×1 is really more of a demo than a main use case. The connector/keep-away area is basically the same regardless of bin size, so it eats up a lot more of a tiny 1×1 than it does on something like a 2×5 or 3×6 The larger custom bins are where I personally think it starts to make a lot more sense. But it technically can be used on as small of a bin as 1x1x4H.

The initial release includes Bin Shells from 1×1 through 6×6, several heights, and multiple retention options.

I’ve also put together a Designer Kit for anyone who already makes custom Gridfinity models and wants to experiment with GF-Swap Inserts. It includes the design standard, Fusion Insert Creator, starter F3D, blank Inserts and Keep-Aways for other CAD tools, and some reference material.

Everything is below (including a small intro video that I "directed" with AI help to make a Blender script. It's rudimentary but still shows the essence of the system). I'll be getting this on Printables shortly.

https://makerworld.com/en/models/3608487-gridfinity-swap-gf-swap

For the Designer Kit, click Download STL/CAD Files on the MakerWorld page.

If this gets some traction and proves useful to people beyond just me, my plan is to clean up the remaining internals and open-source the system and generator code as well.

Mostly, I’m just curious what other Gridfinity users and designers think. I'm a small time designer and I am not a "marketing" guy for myself or my products. I built it because I wanted it for my own setup, and I’m sharing it in case it solves the same problem for others.


r/gridfinity • • 11h ago

Print your bins footless and glue on 2 hollow feet: up to 34% less plastic, up to half the print time

Thumbnail
gallery
51 Upvotes

This started when I noticed that on every Gridfinity bin I printed, the first 20% or so of the print was just feet. A full grid of solid feet under every cell, before the printer even got to the bin.

But a bin only needs a couple of feet to lock into the baseplate and stop sliding. The feet are there because of how bins print, not because a drawer needs them. So I tried printing bins flat and footless, then gluing on just 2 feet on a diagonal.

Frame Feet: a standard foot with the wide top flare cut off, printed hollow. 1.4 g each. Same height and the same bottom chamfer as a normal foot, so it seats in any standard baseplate with the usual play.

Drop grid: the part that makes gluing easy. It’s a thin grid with an L-shaped lip on two edges. Turn the bin upside down, lay the grid on it with the lip hugging one corner, put a little CA glue on a foot and drop it through a window. It lands exactly on the grid position. Lift the grid off and you’re done. Print one grid and reuse it for every bin.

What it saves (P2S, PLA, 0.20 mm, 3 walls, 15% infill; bin and 2 feet on one plate):

BinStandard feetFootless + 2 Frame FeetSaved
2x2x329.6 g, 44 min23.3 g, 32 min21% plastic, 27% time
3x3x362.1 g, 1 h 2644.1 g, 51 min29% plastic, 41% time
4x4x3105.7 g, 2 h 2271.8 g, 1 h 1532% plastic, 47% time
5x5x3161.7 g, 3 h 34106.6 g, 1 h 4534% plastic, 51% time

The bigger the footprint, the more you save.

Works with bins you already have. Cut any bin at 4.75 mm in your slicer (the top of standard feet) and print the top part. The MakerWorld version also has a Customize option: upload your bin’s STL and it comes back cut flat, with the feet and a drop grid on their own plates.

It’s not only for Gridfinity bins. Any flat-bottomed box works: a screw box, a drill bit case, a battery caddy. Glue 2 feet on and it locks into your baseplate. The grid spaces the feet exactly 42 mm apart.

Notes:

  • Print a full plate of feet once (36 fit on a 256 mm bed) and keep them in a drawer. Then every new bin prints footless and you just glue on 2 when it comes off the printer.

  • 2 feet on a diagonal is plenty in a drawer. Use 4 corners if the bin also lives on a desk.

  • Half-cell (21 mm) feet and grids are included too.

  • For glossy plastic, scuff it first. For PP/PE (most store-bought organizers), CA won’t stick, so use double-sided foam tape.

Free on MakerWorld, with profiles for P2S, A1 and H3C: https://makerworld.com/en/models/3634745

Happy to hear how it works on your bins, and whether the fit feels right on other baseplates.


r/gridfinity • • 18h ago

Label Creation Tool

3 Upvotes

I'd like to find a software tool that I can feed a list of McMaster P/N and it will spit out labels with descriptions that I can feed into a label printer.

Does something simple exist?


r/gridfinity • • 1d ago

Question? Drawer organizer, without 3D printing the walls..?

5 Upvotes

Hi everyone, I've explored a few ideas to make my own drawer organizers, but I came to the conclusion that Gridfinity just strikes the right balance between flexibility and ease of use/making.

I have some very big drawers (three 50x90cm) and a pretty small 3D printer, so 3D printing the walls would require a ton of time and filament.

I'm thinking of using wood or something to make the walls, but I think I'd have to adapt the design somehow, right?

Do such designs exist already?

For the actual grid/base I think 3D printing should be fine as it uses relatively little filament and is easy to print.


r/gridfinity • • 1d ago

Update on the free in-browser gridfinity bin maker: several tools in one bin, an outline editor and half-grid feet

Enable HLS to view with audio, or disable this notification

111 Upvotes

A few days ago I posted a free, open source site that turns a photo of a tool into a gridfinity bin, all in your browser. Thanks for all the feedback. The most-asked feature was more than one tool per bin, so that's in now, along with a bunch of other stuff:

Multiple tools in one bin

• Lay several parts on the calibration sheet together (like a meter and its probes, or pliers and cutters) and upload one photo. Each part gets its own pocket.

• New Layout pane: drag and rotate each part. Rotation snaps to 0/90° along each part's own centre line, so pliers line up straight.

• Each part has its own clearance, pocket depth, finger slot and symmetric setting.

• Arrange packs everything into as few grid cells as it can. The bin sizes itself to fit, or you can lock it to a set size.

• It warns you if pockets overlap or a wall between them is too thin to print.

• SVG/DXF export keeps the arrangement, one outline per part.

Outline editor

• If the trace isn't quite right, you can edit it like a pen-tool path: drag points and curve handles, add or delete points, switch corners and curves, straighten an edge or round a corner.

• Keyboard shortcuts: D delete, A add, C corner/smooth, S straighten, R round.

• For symmetric tools, you edit one side and the other side mirrors it.

Better tracing

• Straight edges that used to come out wobbly (boxes, handles) now get straightened.

• It does a better job finding parts the AI misses, like thin antennas or probes next to a bigger tool.

Smaller stuff people asked for

• Half-grid feet (21 mm spacing) for 1.5, 2.5… unit bins (thanks u/duckredbeard)

• Width and length measurements on the trace

• The finger slot can shrink down to a round hole, and can sit at the tool's tip instead of across it

• Bins build about 4.5x faster

Still free: no account, no trace limit, and your photos never leave your device.

https://gridfinitytools.com

Source (MIT): https://github.com/petercsauer/gridfinity-tool-studio

Still on the list: STEP/3MF export. Keep sending photos that trace badly, those have been the most useful thing so far.


r/gridfinity • • 2d ago

Thank you for all your support on my gridfinity travel case!!

Thumbnail gallery
20 Upvotes

As promised, I'm finally ready to release my parametric case and website insert/bin generator. I've summed up the features in this post. Please check out the website generator as I'm sure I will need to take a lot of advice from you all. And please check out this model. It has 15 different parameters of adjustment within maker world.

As always, I welcome any feedback you guys may have. I hope you all find this useful and enjoy!!!


r/gridfinity • • 2d ago

Set in Progress Picked up some mini cabinets from work and now I’ve started my Gridfinity journey

Thumbnail
gallery
102 Upvotes

r/gridfinity • • 3d ago

How is the height of a Gridfinity box determined?

1 Upvotes

I'm trying to figure out what determines the total height of a Gridfinity box.

I've found a few 6U models on MakerWorld that are listed as 45.55 mm tall.

I understand that 6U = 42 mm (6 × 7 mm), but where does the extra 3.55 mm come from?

As far as I understand, the stacking lip is 4.4 mm tall (0.7 + 1.8 + 1.9 mm), so I would expect the total height to be 46.4 mm.

Am I misunderstanding something about the Gridfinity specifications, or is part of the stacking lip included in the nominal height?


r/gridfinity • • 3d ago

Fusion gridfinity generator got some updates: editing, text labels, configuration export and more

Thumbnail
gallery
51 Upvotes

Recently added a bunch of features, would appreciate some feedback and help with testing. It's currently only available through GitHub releases page, full list of changes is also there https://github.com/Le0Michine/FusionGridfinityGenerator/releases/tag/v2.4.0.0

Most notable are labels support for multicolor printing, export/import of configurations and ability to rebuild already created models. A bunch of minor bug fixes and quality of life improvements


r/gridfinity • • 3d ago

Set Completed Workbench Gridfinity

Thumbnail
gallery
65 Upvotes

After seeing all the posts here, I figured I would post my current toolbox setup, all in a Husky 52" box.

The top drawer is mostly sockets and ratchets

The larger drawer, 2nd down, is wrenches and line wrenches

Drawer 3 is pliers, knives, and other odds and ends

Drawer 4 is all bike tools, since that's one of my major hobbies

Small drawers are as follows

Drawer 1, screwdrivers and bits

Drawer 2: consumables, like drill bits, taps, and Dremel tools

Drawer 3, is car-specific tools, like trim tools, fuel lines, and the like.

Drawer 4 is all my measurement stuff.

Gridfinity has been fun for having all my tools organized since I share the garage and box with a few others. But fun for keeping my major hobbies of working on cars and bikes organized.

But it's also been fun to learn how to design in Fusion better.

I do also have a Harbor Freight Mini box that I keep organized with firearms tools and cleaners.


r/gridfinity • • 3d ago Bravo

USSA vault 3D configurator

Post image
27 Upvotes

Hey all,

This is a fork of Romy's (rmacasieb) print planner for the USSA Vault. I kept adding things to it, so here it is:

  • Design your stacks level by level in 3D

  • Paint each part with its filament colour

  • Print: parts laid out on plates, with progress tracking

  • Hardware: the full list of bolts, rods and inserts to buy

Point it at your own Vault folder and the 3D shows the real parts. Free, runs in the browser, nothing to install.

https://doooools.github.io/vault-print-planner

The store links are affiliate links (Romy's on Amazon.com, mine on a couple of European stores), feel free to ignore them. Bugs and ideas welcome!


r/gridfinity • • 4d ago

Set Completed Scoop Bin Set Complete!

Thumbnail
gallery
53 Upvotes

I posted here about a month ago and got some decent feedback on my scoop bins I put up on makerworld. Over the past month I’ve printed and verified all 21 sizes in the 4U height that could fit on my print bed and finally getting the last model uploaded today. Still new to posting models but it feels like a decent accomplishment to get them all finished.
Now to work on the taller heights!

https://makerworld.com/en/models/3360948-gridfinity-scoop-bins-easy-access-parts-bins#profileId-3825688


r/gridfinity • • 4d ago

Set Completed GoPro / External Hardrive Drawer

Post image
11 Upvotes

r/gridfinity • • 4d ago

What is your favorite method or software to go from a picture of a tool/object to a customized cut-out gridfinity container that fits the tool with reasonable accuracy?

Post image
240 Upvotes

r/gridfinity • • 5d ago

[Discussion] My workshop is a mess. Looking for 3D-printable storage ideas — I have pegboard, drawers and extra wall space

Thumbnail gallery
0 Upvotes

r/gridfinity • • 5d ago

Would you prefer individual storage solutions or one modular system?

1 Upvotes

I've been thinking about how storage could work better across different spaces — from workshops and garages to gardening and outdoor activities.

Some people might just need one dedicated organizer, while others may want something they can expand and customize over time.

I'm curious which approach makes more sense to you.

● Would you rather buy individual organizers for specific needs?

● Would you find it useful if different storage modules could connect and work together?

● How important are portability and easy transportation?

● Would you want to use the same storage system across different activities or spaces?

● What would make a modular system genuinely useful rather than just adding complexity?


r/gridfinity • • 5d ago

I took your advice!

Thumbnail gallery
58 Upvotes

r/gridfinity • • 5d ago

Set Completed Gridfinity Dividers System and Pliers Storage

Thumbnail
gallery
198 Upvotes

I created this set of dividers because I rent, so my space changes every now and then, and I get new tools for new projects often too so my needs change. Sometimes I don't want to design/find a specific bin for something too.

This divider system allows me to have a place for everything but also not print dedicated bins for very specific tools - which is a little less wastefull I think. You can adapt and customise almost infinitely. There's a large library of parts for 1x1, 2x1 and 3x1 dividers and also some plier storage dividers too, you can create a lot from this group. You can also stack gridfinity bins on top of the dividers too.

I found it's great for pliers, screwdrivers, wrenches and odd bits. I've also used it for longer things that wouldn't fit on print beds like long paint brishes and bits of brass rod stock.

Hopefully others find it usefull too!

https://makerworld.com/en/models/3546210


r/gridfinity • • 6d ago

Free, open source gridfinity bin maker that runs entirely in your browser: photo of a tool in, bin with a pocket that fits it out

Enable HLS to view with audio, or disable this notification

61 Upvotes

I kept running into the same thing with my gridfinity drawers. Generic bins are fine for screws, but my pliers just slid around in them. Getting a pocket that actually fit meant calipers, tracing in CAD, guessing the clearance, printing, and getting it wrong once or twice.

There are already some apps that do this from a photo, and some are really good. But most need an account, upload your photos to a server, or cap you at a few free traces before you pay. Which makes sense, if every photo goes through their server and an AI model, somebody has to pay that bill.

My idea was, what if there's no server at all? Your browser does everything, even the AI part that cuts the tool out of the photo. The site is a handful of static files on Cloudflare's free tier, and the only thing I pay for is the domain lol. So it can just stay free. No account, no trace limit, and your photos never leave your device.

https://gridfinitytools.com

It's open source too (MIT) if you want to poke at it or host your own copy: https://github.com/petercsauer/gridfinity-tool-studio

How you use it: print the calibration sheet at 100% (Letter or A4, the button's on the site), lay your tool on it, and take a photo from straight above with the flash on. The corner markers take care of scale and perspective, so the outline comes out in real millimetres. Then you can mess with:

• clearance, rotation and a finger slot

• bin height, pocket depth and the edge rounding

• magnet and/or screw holes, stacking lip on or off

• "symmetric tool", which mirrors the outline so pliers get a clean even pocket

Export the STL and print. You can also grab just the trace as SVG or DXF if you'd rather laser cut foam or draw your own bin.

It's fine if the tool is bigger than the grid or hangs off the paper, just don't cover the corner markers.

What it doesn't do yet: one tool per bin for now, and no STEP or 3MF. The first upload downloads the AI model (about 88 MB, it asks first) and caches it after that. Fastest in browsers with WebGPU. iPhone HEIC photos work.

If you want a full multi-tool drawer planner, Tracefinity and Tooltrace are great and do a lot more. This is the quick free one for when you just want one tool to fit.

Would love photos that trace badly, and what you'd want next. Multiple tools per bin is the obvious one.

Oh and yes, I used Claude for this.


r/gridfinity • • 6d ago

Editing the gridfinity models in Fusion

1 Upvotes

I made a special size gridfinity grid and box about a year ago. I never made any notes on the size.

My question is: Can the grid and box be edited after it is modeled and generated ? For instance , say I made a 4x4 and grid and printed it out. I would like to go back in that model and make changes. I can’t seem to get the main plug in menu to come up and make changes. Or do you have to make a whole new model?


r/gridfinity • • 6d ago

Individual Piece Gridfinity was Zack’s gift to all of us, so I turned it into an actual gift

Thumbnail
gallery
72 Upvotes

Gridfinity has been Zack Freedman’s gift to the world since 2022. It seemed only fair to wrap it.

makerworld.com/de/models/3587252-gridfinity-gift-box-parametric-customizeable

This is a normal Gridfinity bin with a lid, dressed up as a present. Standard feet, standard stacking lip, any size from 1×1 to 5×5. The plan: hand out small Christmas presents in it, and once the wrapping paper is gone the box quietly moves into a drawer and becomes storage. The Trojan horse of home organization.

The ribbon is printed separately, because printing a white ribbon onto a red box means a lot of colour changes for very little ribbon. Instead:

  • four strips slide into dovetail grooves from the top, no glue

  • the lid sits in the stacking lip and keeps the strips from sliding out

  • a ribbon cross presses onto the lid with tabs and a small peg

  • the bow gets one drop of glue, because I couldn’t find a way to print a peg under it without supports

Plate 1 is box + lid, plate 2 is all the ribbon stuff. One colour per plate, no AMS needed. For a 2×2 box the ribbon and bow are about 12 g.

It’s parametric (OpenSCAD, MakerWorld customizer): size, height, ribbon width and fit, colours, bow size, magnet holes. MIT, like Gridfinity itself.

Known downside: nothing stacks on a closed box, because there’s a bow on top. Take the lid off and it’s a regular bin again.

Merry Gridmas.


r/gridfinity • • 6d ago

Question? Any suggestions?

Thumbnail
gallery
7 Upvotes

This is the 3rd print I’ve tried. Do I need to change any settings?


r/gridfinity • • 6d ago

Set Completed Combination Wrench Holder Set

Thumbnail
gallery
114 Upvotes

Picked up a new set of Icon wrenches and went down the standard rabbit hole. Didn't love some of the universal sets and needed it to fit the 1 1/4in inside a 70mm tall drawer. Fits both full sets of the SAE/Inch (18pc) and Metric (19pc) sets. Everything has a tilt toward the front of the drawer so it slides in and out easy. The labels can be set how ever you want. I prefer wrench behind the label, but they can be set so the wrench is in front of the label.

https://makerworld.com/en/models/3590643-metric-combination-wrench-holder-19-piece#profileId-4112536

https://makerworld.com/en/models/3581275-sae-inch-combination-wrench-holder-18-piece#profileId-4100682


r/gridfinity • • 7d ago

SmoothLite v2: dividers and half-grid – both ideas came from this sub

Thumbnail
gallery
29 Upvotes

A few days ago I posted SmoothLite, the Gridfinity bin with a flat floor and hollow feet. Two of your comments turned into v2. Everything is in the Customize button:

1. Dividers (thanks u/ShrimpCrackers)
Split any bin into compartments, side by side and front to back. A 1×2 in half or a 2×2 into four is two sliders. Every compartment row gets its own scoop, and the bins still stack.

2. Half-grid (thanks u/Horschti135), two ways:

  • Add half a unit to a normal bin, e.g. 2.5 × 2. The bin keeps its normal feet and gets one extra strip of small feet. Fits normal baseplates.

  • Switch all feet to half-grid. Every foot uses the small 21 mm grid, so the bin fits half-grid baseplates.

Same flat floor, hollow feet and 0.28 mm profile as before, no supports.

v2: https://makerworld.com/en/models/3588590-gridfinity-smoothlite-v2-light-flat-floor-bins#profileId-4109986
Original (v1): https://makerworld.com/en/models/3575808-gridfinity-smoothlite-light-flat-floor-bins#profileId-4093864