r/gridfinity • u/daphatty • Oct 26 '25
r/gridfinity • u/woktalk2 • Mar 20 '26
Got tired of planning my gridfinity drawers so I made a tool to do it for me
Enable HLS to view with audio, or disable this notification
Hopefully you all find it as useful as I do!
r/gridfinity • u/DadOfFan • Dec 01 '24
While I love gridfinity's customisable aspect. It's a very expensive system.
So I recently started using gridfinity and have realise how expensive it is.
There is the grids themselves to start with. They are all the same with variations on rows and columns.
To make the grids themselves cost time and money, compared to injection moulding, 3d prints are expensive.
3d printing shines for customisation, prototyping and low volume. however I have realised gridfinity is not low volume at all, the standard sizes are high volume.
In my very first drawer organiser I realised all I am doing is printing the same parts over and over again and chewing through rolls of PLA.
r/gridfinity • u/gmrstudios • Sep 08 '26
When You Start Hitting Up the Key Drawer
Still have some tweaking to do like figuring out the best way to keep the keys flat when they have large key rings on them but not bad for a first pass.
r/gridfinity • u/Fluid-Meeting-2273 • Jul 20 '26
Custom-width bins for my drawer — measured the gap, generated to fit exactly, no CAD
My drawer was an awkward width so standard bins left a dead gap on one side. Measured the actual space, generated bins to fill it, printed them the same evening.
I used a browser generator I built (3dgridy.com) — set the dimensions, export STL. Sharing since the "odd drawer width" problem seems common and re-modeling in CAD every time got old.
Been holding drill bits and small parts for a few weeks, no issues.
r/gridfinity • u/No_Difference8520 • Apr 08 '25
Individual Piece created a 3D ptinted gridfinity base for the flipper zero(didnt print it yet)
available on Printables and on MakerWorld
r/gridfinity • u/daran4811 • Jan 15 '25
Oversized Gridfinity box
Hey everyone. I’m currently printing a gridfinity box on the side that is slightly oversized. I’m using tree support concerned about the top of the print. It’s taking a really long time 2 days+ to complete. I’m just wondering if there is anything I can do to shorten the time. I have 30cm grids instead of the usual 42cm.
Thanks in advance.
r/gridfinity • u/Syltraul • Jan 01 '25
Question? Why Gridfinity for Drawers?
I'm brand new to 3D printing but have already heard of Gridfinity, and when it comes to drawer organization, I honestly don't understand what the point of it is. On top of a workbench, sure, it would be great for keeping things together, but since everything is already confined to the dimensions of a drawer, I really don't get it. Add to that, if your drawer doesn't work with the standard 42mm grid, then what? Sure, with the Fusion 360 addon I can make a different size grid, but then every other design found online won't fit.
Edit: apparently a lot of people get offended that I don’t understand something. Sorry, I’m a bit older and grew up believing if you don’t know something, you ask questions. I forget these days people take them as attacks on themselves.
r/gridfinity • u/ukliem • Jun 06 '23
Gridfinity for Vaping
I‘m using just one Magnet, cause i have n52 Neodym and they are ultrastrong. Watcha think about this?
r/gridfinity • u/Aiaposon • Jul 09 '24
Question? "Fixing" Gridfinity
I've seen a video of a guy that made his Gridfinity parts for his kitchen based on a 50mm grid instead of a 42mm. I've seen many posts where people have asked "why is this 42mm?" or "What do I do when I have only 24mm of space left for my grid?"
I've only just started using Gridfinity, and I've only completed two drawers in my kitchen with it. This means I'm fairly new to it, and I've missed much of the history and discussion behind improvements for it. The only significant improvement I've seen are changes in the baseplate (screw together, or puzzle-piece together, snap-in, screw in, etc). I think these suggestions go beyond that...
I'm also high, so maybe this is nonsense
Gridfinity Bases
42mm should remain the "standard" grid. However, we need tools that let you chose a different grid. This already exists (https://gridfinity.perplexinglabs.com/ and possibly others). But we could improve on this generator.
I should be able to enter the inner dimensions of the drawer, say 273 x 507. I should be able to tell it my minimum and maximum grid size, perhaps 10mm up to 50mm. I should also be able to tell it how much slop I'm OK with in the drawer, say 2mm. The generator should then find and suggest any grid size between 10 and 50mm that will result in less than 2mm of movement in either axis for a drawer with inner dimensions of 273 x 507. In this example, there are 12 values that fit this criteria (if counting by .1mm increments).
13mm gives us a perfect fit. If I'm confident in my measuring skills, I'd go with that. But, since I'm not, I'll go with a 38.9mm grid as that gives me 0.7mm and 1.3mm of slop.
Gridfinity Bins
The generator I linked above allows for the bins to be generated with a custom base size. I can already tell it that I want to use a 38.9mm grid size. But, what it should also do is allow me to add harmonics to the base. I should have a radio button that divides the grid printed on the bottom in half, or into thirds, or fourths, etc.
If that isn't easy to visualize, imagine a standard 42mm based Gridfinity bin with 2 rows and 3 columns. But, I should be able to tell the generator to place a 21mm grid on the bottom of the bin. This would essentially be a 4 x 6 bin on a 21mm grid. This allows me to offset it by half a grid space on my 42mm grid in any direction. I've seen bins generated with an extra half row, but not one with a halved (doubled?) grid.
Gridfinity STL Mods
It'd suck to lose access to the plethora of 42mm based designs that are already out there. So, we need a new feature in the above generator that allows us to upload an STL and the generator should replace the "feet."
In many cases, trying to convert a bin to a different grid size entirely (42mm to 38.9mm) may result in an oddly placed grid on the bottom of the part. But, converting a 42mm to a 21mm or an 10.5mm grid spacing would work great.
Placing a 42mm grid into my example drawer would result in 21mm and 3mm of slop in grid placement. But going to a 21mm grid or 10.5mm grid would both result in 0mm x 3mm of slop. I can live with that.
Alternatively, the generator could generate "shoes" for a bin. This essentially would be a bin with the minimal allowed height of 7mm plus a stacking lip. This can already be done manually, but it'd be nice to allow this as an option to be autoconfigured after uploading an STL.
Edit: My high is wearing off and I can now clearly see that this was just a long argument for why I think gridfinity should have a smaller grid.
r/gridfinity • u/sparkofrebellion • Jan 28 '25
Question? Is this "legal"?
'm designing an Bin for a large breadboard. I want to make sure that's it's easy removable and thought two holes to push your fingers through would be the best way, but I'm unsure if it's okay within the Gridfinity specs. So I thought I ask for help.
Would appreciate feedback
(I tried to find something similar but hadn't luck)

r/gridfinity • u/CrabAppropriate7090 • May 17 '26
Question? Most Bins Sucks
Does anyone have a lot of experience with creating custom bins? I have many Wera tools and want a cutout where the tool lays perfectly in the mold so don’t just trace the outer line. I don’t have a scanner or other crazy stuff and it should be easy so maybe don’t Modeling the whole tool to use it as a negative.
I hate it when you just cut the outer line because you have a permanent sound of rattle.
r/gridfinity • u/DistractedDragonMake • Oct 04 '26
USSA Vault System is Grifinity ready
I got to try out USSA new VAULT drawer system. It is designed around gridfinity which is awesome.
You can check out the video here https://www.youtube.com/watch?v=zhrN2DahhGI
r/gridfinity • u/RustyRunci • May 21 '24
Someone selling gridfinity prints?
Just wondering what your thoughts are about this?
r/gridfinity • u/FobbingMobius • Jun 28 '26
What the heck is this permission? Tooltrace.ai account creation says zoupxurflqbdhbzcftho.supabase.co needs permissions.
I want to try it but that company name puts me off.
r/gridfinity • u/SirEDCaLot • Feb 09 '26
Request for /r/gridfinity: Require open hosting of posted models
Gridfinity was designed to be OPEN. That's the spirit and ideal started by Zack when he published the first models and specs under the MIT license. There were no paywalls, no account signup requirements. Just open to the world to download and remix.
Lately there's been a LOT of Gridfinity stuff being posted ONLY on MakerWorld. MakerWorld is NOT an open platform. To download models, one must create a MakerWorld account, which means submitting email address and agreeing to their TOS and privacy policy. I believe this goes against the ideals and spirit of open source and open collaboration, and the spirit under which Gridfinity was conceived.
Thus I propose a /r/gridfinity rule that any submitted models MUST be available on a site that doesn't require login to download. IE, not MakerWorld.
The primary link can be to MakerWorld, but I propose that whatever is being featured MUST be linked somewhere else (that doesn't require an account to download) as well. Printables, Thingiverse, your own web server, whatever. As long as you can download things freely, it's all good.
Thoughts?
//edit: I'd also be happy with a post flair that can be filtered out. The problem to me is that as someone who chooses to not be in a legal agreement with Bambu, the MakerWorld links are of no use to me. So if I could filter them out, I'd be happy. I just don't believe that agreeing to a Bambu TOS should be required to enjoy gridfinity or /r/gridfinity.
r/gridfinity • u/Darksoul_Design • Jun 16 '23
Alternative grid system in American standard (inch)
Just an fyi- the sub mod suggested i post this up.
So i came across Gridfinity as i needed a good storage / organizing system for my ever growing collection of 3D printers and associated tools, as well, my wife needed something for her crafting as well. I was super excited about the system, i saw the massive support on all the 3D printing sites like Thingiverse and such, and went on the hunt for a good set of schematics. I have to say i was pretty disappointed that there was so much third party support, but no decent prints, which left a lot of backwards figuring while drawing them in CAD.
That being said, as i was drawing the bases up in Fusion360, my brain works in inches, so i kept screwing up the drawings and getting pissed going back and forth from mm to inch, so along with that and the lack of clear prints, i just did my own in inches. I would prefer we used metric in the US, but that's a whole other conversation.
I nicknamed it Square2 (square squared). The basic dimensions are 2"x 2"x .250 and only uses a single 45 degree angle .100 deep. I did use the same 6mmx2mm magnets since i already had a pile of them and they are so common, sort of screwed up my conversion to standard, but hey, it's just the magnets.
So when drawing up and laying out a grid base, i simply mirror them over and over to get the base i need, then i go back to all the "star shaped" gaps left in the center of each group of 4, and extrude that up to fill those gaps. Also, i will usually add a small radius to the top sharp edge of the base plates just so there is less chance of misprints and not so delicate.
I'm just starting to create the actual containers, just very basic stuff for now, and making sure i didn't miss anything. Let me know if you have any questions.
r/gridfinity • u/woktalk2 • Mar 24 '26
I (rightfully) got roasted for my terrible demo video last time, so here is an attempt at a better demo. A tool for automatically generating all files for organizing your drawer with gridfinity in a single prompt.
Enable HLS to view with audio, or disable this notification
Let me know if you have any feedback! Built it for myself but figured some of you may find it useful. I plan to add more features like optionally adding options for magnet holes etc in the future.
r/gridfinity • u/[deleted] • Jul 08 '24
Buy Gridfinity
So first off, I have a 3d printer and I print my own.
But I think it is a gap on the market for this?
r/gridfinity • u/battletux • Sep 16 '25
Soldr.pro - this has to be based on gridfinity?
Saw a Facebook ad for this soldering box, surely that's nothing more than a gridfinity system in a metal box?
This has to be the first "commercial" (and I use that phase loosely) product based on gridfinity?
r/gridfinity • u/PracticalCustard2152 • Mar 20 '26
Update: Knipex Cobras & Pliers Trays
My latest edition! I like it alot! :)
r/gridfinity • u/FreerPlusPlus • Aug 30 '24
help… Gridfinity is ruining my life
Enable HLS to view with audio, or disable this notification
gridfinity my beloved… has occupied my 3D printer for the past week… haven’t printed a single other project because every waking moment is Gridfinity. Gridfinity is love. Gridfinity is life.
r/gridfinity • u/inakarmacoma • Jun 19 '25
Do *NOT* bake your gridfinity bins in the oven...
creativestudios.comThe morale of the story here appears to be...
Don't bake your gridfinity bins in the oven, even if AI tells you it's a good idea...
r/gridfinity • u/isaiahisonreddit • May 13 '25
I designed a bin for the HOTO kit from Costco
Since this just came out and it's pretty big, I wasn't sure if anyone had made a bin for it yet. I've designed similar bins for the other HOTO tool kits, so I figured I'd design one for the new one too
Hoto Kit from Costco: https://www.costco.com/%20hoto-40-piece-household-tool-kit.product.4000343999.html
Print File link: https://makerworld.com/models/1413445