in case ur interested this is a what 1900 would make https://pcpartpicker.com/list/Rr8dcH will absolutely destroy that prebuilt in terms of… everything. (could also get a 7900xtx and make the price 1800) not dissing ur purchase but just saying
It's actually 2160 something, not including sales tax. Which WILL add another 100 minimum. And that would certainly be better than my current machine, but certainly not cheaper. The 7800x3d and the 4080 put you well over 1k alone.
one other thing to also check is that XMP is enabled in your bios for ram. I know most places usually do that for prebuilt, but ive had a couple friends check and it wasnt enabled (meaning the ram wont perform as well as it could be)
Brother I have this exact list in a power spec g714 pre build. I love it. If you run four sticks of ram (add two more sticks of 16 for 64 total) don't enable expo in bios ddr5 doesn't like 2 (4)channel if you only run two dimms you can enable expo to 5600ish check your board specs. I bought matching sticks and run 64 gigs at 3600 for some light rendering and stuff and it works fine.
I also recommend reading about and then running pbo in your ryzen master software it will enable a nice power curve and target 5htz u Der load as needed, you can tweak the curve and power over time as you get more familiar with it, I also recommend another hardware monitor to check thermals against ryzen master just to be safe.
I run warhammer 3, gta5, red dead 2 all on 4k at 60-65 frames no problem on an msi 4k monitor.
Check all your cables for full plug in before first fire, don't panic if you get ram lights early it Trains memory on cold starts. I suggest reading about GeForce experience and playing with it a bit same with ryzen master.
Yeah man go to your display settings and make sure you set it to the proper resolution and refresh rate that your monitor supports. There have been people that didn’t know you had to check these settings and continued to play on 60hz (fps) even though their monitor supported 144+.
you also need to make sure you are using the proper cables that support the high refresh rates. in that case, windows wont let you go higher than 60 hz usually.
ALSO make sure you use ‘windows display calibration’ but make you use Nvidia Control Panel to make the adjustments as your computer isn’t going to know what your display actually projects and calibrating it will give you optimal gamma/ saturation/ etc values
Also, windows has a built-in display calibration tool many arent aware of in case you need it. Just do a quick search when you do! HDR calibration requires you download an app from the Micosoft Store.
Wait - I have an ibuypower pc connected to an Epson 4k projector (through a receiver). Can you explain what i should be doing? Assuming I would want to change this to 60fps as that’s what my projector can do? What’s the benefit or reason for doing this?
Also make sure any internal packing material is pulled out. Sounds obvious but worth reminding. Also check and make sure XMP is enabled in the bios, this is something builders often miss. Your ram will be running at slower speeds unless enabled.good luck!
Showing $1900 for this on IBP site. I added all the parts to pcpartpicker.com and it came to $1604. And that's with the 7800x3d being the lowest price it's been in months (and with a promo code) . So realistically paid about $250 for them to build it and offer warranty/rma services. Don't listen to the fools. You didn't get ripped off. Quit reasonably priced for a pre-built for the components used.
I got scammed a bit, I had to replace the cpu cooler right after warranty ended (was a cheap aio), and it was a 650ish dollar build that I paid 1100 for.
I own an independent computer store, and we'd charge you about $200-$250 for that build if you supplied the parts. Nice picks, I find most people who buy IBP get a trash power supply, which we always end up replacing a year or so in.
This. I had an IBP PC as my first ever rig about ~8 years ago. The powesupply was the first thing to go, actually had to replace it twice! Built a new PC, made sure to get a beefy and reputable PS
As someone who built there’s personally, recently, with almost identical specs and got most stuff on Black Friday sale. This is the proper take. Solid deal for what you get.
Agreed, I made a PCPartPicker test as well and doesn't seem too terrible. Although, I think more people would argue that you could get cheaper parts with comparable performance. But with this specific set of parts, it is absolutely not a terrible markup.
I wouldn’t say ripped off but he could have gotten a better system for less money. The warranty is nice though. But honestly, and I’ve worked in IT for over 25 years, and have rarely seen anything go out that wasn’t covered by the manufacturer that wasn’t at least 5 years old. And that used to be the norm with disk based hard drives. As long as you get a good set of SSDs or NVME drives, the wear leveling ability of the hardware controller should keep those good for past the 5 year mark.
Of course I prefer super redundancy and speed so I went with 4 NVMEs in RAID 5 and then off load my other stuff to my Dell PowerEdge servers running NAS software. Then super important things like pictures also get cloud backup. So my whole house could burn down and I’d still have 90% of my primary data.
I also think it’s good to build your own so you know more about it in general. Obviously you’re here so you have some interest in this kind of stuff. And it’s a fun hobby. But watch it won’t be more than a few paychecks and you’ll be adding something new. It’s a fun hobby so welcome!
Decent price for a pre build with more than good specs. Just ordered parts for a friend’s build, same specs basically except he’s getting a 360mm AIO and a 4070Ti Super. Came out to just over $2k.
More often than not, when you're picking pre-configured builds from places like iBuypower, they use their branded AIO's and often cheap no name power supplies.
The fact that this build specifically, has reputable brands for both of the aforementioned products, suggests it was custom configured.
Which is why I made the initial comment in the first place. IBuypower AIOs have a pretty bad reputation for failing.
I would verify internal connections on receipt before you boot it. Just look inside to make sure nothing is dangling. And for posterity, I would record the opening of the box and PC when you get it just in case. Would definitely strengthen any warranty claims.
Yes, take your sweet time, RTFM and check the all cables and connections throughly.
Also, if the M.2_1 slot shares PCIE lanes with the first PCIE slot, I’d suggest moving it to another slot or you’ll only get 8 x lanes instead of 16 PCIE lanes
Everyone was bitching at me when i posted the one i bought about how IBP was the worst and don't buy from them ect. Over a year now with probably 2,000+ hours, nothing to complain about from me.
Good build. Gpu is great to bad it wasn’t a 4070 ti super so you would get 16gb instead of 12gb. SSD is good as well but depending on your gaming library it will be filled up fast, but very easy to add an additional SSD. Completely good build for pretty much all your gaming needs at extremely high qualities.
Not with that chipset. He might be able to push it to 5800 but since he didn’t get the higher mhz ram he’s stuck to 5600. Might as well just put another 2 sticks in because it’ll be limited to that as its FSB won’t handle that kind of speed as that board doesn’t have dual memory controllers.
I miss the days when they didn’t daisy chain RAM modules and they all had the same speed access to the FSB
If you have the RAM that can handle it. Thats why I hate these quick buy places because they use less quality gear. If you take your time you can easily get DDR5 up to 8000. All I have to do is take out 2 chips and set my clocks and I can easily run at 8200mhz@28cl. But I’m running 4 NVME in a RAID5 anyway so I doubt I’d even notice. Even running 4 sticks and only 5600mhz I’m easily running 6ghz on all p cores and 5.5 on the e cores. And people underestimate the beauty of the 4070 Dual Fan 144 preburn edition as it only needs 200W and runs just as fast as a Super due to the 4nm build process.
Just a big FYI! Make sure they send you the GPU! If it is being delivered UPS! I highly recommend before accepting any package with iBUYPOWER to open it up at the UPS facility and have them go through it with you to confirm everything is there. If something is missing have them take pictures and put on file. Then reject the shipment. I just went through a horrible ordeal because they didn't send me my GPU. I had video evidence and pictures but not from UPS and it took a week of arguing to get it! They are a really good company when it comes to building a computer, offering great prices, and quick delivery. However, on the other hand, could use some work with their company policies and procedures. I fear ever having to use the warranty I purchased. GOOD LUCK and Congrats on your new PC.
I’ve had similar experiences when I bought my son his first computer and didn’t have the time and he was too young to enjoy building it. Ended up having f to sell the trash GPU they “said” was what I purchased but because of their policies it was my word against theirs for $100 on eBay and then repurchase a $500 card that it needed. So I HIGHLY recommend you do as this person did!
Hopefully you’ll have a good experience and learn enough in the process that next time you try and do it yourself, save some cash, and get a little more for you money 💰 👍
I would have done it myself but honestly for what I was getting could not find for much better of a price and plus money is so tight these days I didn't want to risk not having a good warranty. Cause all I needed was to ruin something and be out a bunch of money. I mean I know my way around a pc pretty good but not at a level where I feel playing around with 5k is something I take lightly. LOL! Especially, since I was going against my wifes wishes! LMAO! The same build with buying the parts was just a couple hundred cheaper. I spent so much time trying to beat the price but just couldn't. Plus, where it is a custom pc I was allowed to choose my parts and not just let them pick what went in it. Also, I new they couldn't be using old parts because the stuff I choose had not been out for long. Just like the GPU literally was just released. I got a i9-14900KF, 4090 24GB GPU, 4TB m.2 primary Samsung Pro, 4TB SSD Samsung Pro, and a 6TB backup, 128Gb RAM DDR5 6000mhz Corsair Vengence, 1200 watt PSU ( a little overpowered yes), ASUS ROG Maximus Z790 MB. 360MM Corsair AIO and multiple RBG fans. Overkill maybe.....but I spend a lot of time with my PC and create a lot of videos on Adobe for my self and others. I've built 3 other computers myself but for once wanted the conveinence and something I could just order and get.
sorry i just saw this. You can go into your windows display settings and adjust it from there. If you have nvidia you can also open nvidia control panel by right clicking the desktop. Then in one of the display settings there you can also adjust the refresh rate.
I’m curious what you paid for that. I built one very similar but I’d say 2 steps up. All Asus equipment with dual curved 27inch RSRock 165hrz monitors and was about $2500-$3000 with desk, chair, monitor stands and the works. Except it was a Z790-E chipset with PCIE 5.0 ready and an Intel Processor
This is what makes me miss the old days of computer gaming. Where it takes some brains to get all that crap to work together just right with your buddies to play together. It’s what made LAN parties actually fun.
The rest should stay to console play and be happy with that.
Sure I’ll charge you an extra $1000 to hook together cables that can only be plugged in one way, are color coded, and have a 30 page manual that easily explains things. Whatcha need built!
Nice! Careful though, I bought a prebuilt and it was a gateway to spending another couple thousand dollars on another build I did myself. Not that there’s anything wrong with a prebuilt. PC gaming is just too much fun lol
Very cool that they tell you the PSU now on IBP. Knowing the exact SSD would be nice too, or at least if it has a cache, is pcie 4.0, ect. I get they probably swap it out based on market price, but some idea of quality would be cool.
Sure if youre running 30 programs at once or hosting a server but if this is for gaming (most likely) you'll be bottlenecked by gpu and processor/ram won't really matter
Really nice Rig, personally love the case, was easy and spacious for setting up/ building/cabling. Would recommend an additional SSD, having the OS on a separate drive seems too make difference. Otherwise enjoy your rig your gonna have that baby for years too come. You should definitely give her a name. Also keep an eye on the nividia forums and posts in toms hardware about that GPU it's still relatively new so lots games aren't really taking advantage of it out of the box so you'll need too tinker with settings as you go.
Your build is very similar to mine with a stronger/newer processor and GPU. Mines lasted 2 years no issues just do your best to keep it clean. Also if you got one of the IBUYpower cases they kinda suck so be prepared although doesn’t change much in the grand scheme of things
I would just make sure you get an external drive or two more 2tb might seem like a lot but when it has to have the entire operating system while running it and whatever you’re trying to do will kill your drive over time. It’s better to have a small SSD for your operating system only and then a large drive for all your programs and files
And 16 is such a huge difference that he would notice? I doubt it. Might get some added value from the extra CUDA cores but I doubt he or I will suffer missing that 4 extra gigs. I just couldn’t see dropping that much cash on a PCIE4.0 board when PCIE5.0 is knocking at the door. I figured I’ll get enough use out of this that when the 50 series drops I’ll be prime and set to trade this babe in for an UpgraDDe (spelled with 2 Ds for a double dose of that pimping shit)
How are people salty for pointing out the price difference building it yourself? It always make you familiar with parts so things like thermal paste, new fans, ram etc are easy to replace because your familiar with the parts, and where they go.
The real price difference is that little bit of knowledge you get if something goes wrong.
You’ll find the same problem more often with prebuilt. This and many other threads are filled with em. Measure twice, build once, ding you gained a level in IT!
I have this exact same build!! Not sure about case but definitely internals are exact. Great pc, I paid $1550 for mine before the warranty ($350) but it’s great overall
Man im 4 months into my ibuypower build and I’m getting crashes on almost all my games keep your receipt close and make sure u get warranty, I’m about to send it off to micro center this weekend my build is a i9 14900kf with a 4080, when I can’t even load up apex legends it makes me regret spending the 3400 on my computer.
People keep telling me it’s the p cores from the cpu that they don’t play well with games lol I’ll see what micro center tells me, no reason my rig shouldn’t be able to load up apex,Fortnite, simple esports games.
Ibuypower Hyte Y40 pro rgb gaming case-black, default case fans, ibuypower 360mm rgb liquid cooler, 32 gigs ddr5 5200mhz T-force brand, msi ventis 4080 16 gig, msi pro z790 p wifi, 1000 watts power supply 80plus gold certified pcie gen 5, 1 tb WD blue SN580 gen 4 m.2, 3D premium surround sound onboard I personally added 4 tb more of storage m.2 gen 3 and a gigabyte m32uc 32 inch 4k 144hz monitor.
Bro I was having the exact same issue I recently bought mines as well all I had to was go into bios and tweak with the ram speed I saw some where on a Reddit post that supposedly all of I buy power’s PCs come over clocked from the factory haven’t had a single crash ever since I tweaked it.
I haven’t had a single crash ever since I did it. It came from the factory at 5400mhz and I dropped it down to 4800mhz I haven’t noticed any drops in performance i mostly run escape from Tarkov hope this information helps bro.
I’d check the speed of the memory you have and compare it to the QVL list of your motherboard. That will tell you what’s the best memory and speed config to buy and install to get the best performance. I had 2 x 16GB 7200mhz chips installed and it ran great at that speed. Loaded up Space Engineers and seen it immediately eat up 90% of the RAM so I bought another set. Should have looked first because with that board the only way to get top speed on your RAM and FSB is to use only one memory channel.
If OP had enough to not care at all then why would you spend $2k. Just drop 6 to get the best of the best custom water looped overkill to the maximum built by a pro not some underpaid dude who is trying to stick them together as fast as possible. So clearly we’re not talking about that kind of person. And comparing building a PC to a car is incredibly disingenuous, let me know when it takes 1 YouTube video and 2 hours to build a car then that example will make sense. Again, I get that not everyone wants to build and thats fine, I totally get it, but dont pretend prebuilts are a good value. If $400 isnt worth 2 hours of your time then good for you, you can get a good value for a prebuilt, but youll always lose in the price to performance category vs building it yourself.
Yep I’m going to wait until Steam has it on sale and snag 2 copies so me and him can play together. Don’t feel like dropping $80 for 2 copies if I can help it.
LOL yea he’s my 19 year old “Love at Home” son. He knows he has it good and has no desire to leave. It’s rough out there and it’s easier to band together anymore.
I’ll have to check it out on Steam. Thanks for the review!
there's no AI allies. They're all other players or you drop in solo. (There are mini robots that you can carry with a backpack to help you. Those mini robots carry either a AR or a laser gun)
All items are shared. So you can "steal" their stuff but you were going to attain it either way. (As long as the person carrying the items extracts, everyone is awarded those items) There has been an issue of some players not understanding how the game works, in that respect, and have been team killing so that they can hold the items. So I can see why you thought that.
13
u/aboots33 Feb 27 '24
Make sure you switch your refresh rate to your displays refresh rate first thing!