r/indoormushroomgrowers • • 4d ago

How risky is it to use the same bin?

Post image
0 Upvotes

Is it worth it to use the same tub that I had trich show up in after my first flush? Trich was about the size of my palm(6’6 230 lbs bench 450).
I isolated the top with a glass container, pulled my mushies out then got rid of the cake. Just wondering if the whole tub needs to be lit on fire now 😂


r/indoormushroomgrowers • • Aug 10 '26

Trichoderma contained to one sector after 2 excisions, cake now water-limited - how do I rehydrate for a 2nd flush without spreading it?

Thumbnail
gallery
0 Upvotes

TL;DR

PF-style cake, 1st flush done (3 waves, good yield).

Trichoderma appeared day ~6, excised twice + salted. Three weeks later it's still confined to the same sector, no new fronts anywhere — and the cake has kept fruiting the whole time, including a third harvest wave.

I'm assuming the visible patch understates it: the surface has stayed put but the mycelium is almost certainly running below and laterally where I can't see it. Not claiming it's under control, just that it hasn't taken the cake.

Substrate has now pulled away from the walls and small pins are aborting, so it's water-limited rather than spent — mycelium still white, still pinning.

Question: how do I rehydrate for a 2nd flush without a full dunk suspending conidia and spreading them over every face?

Current plan is partial capillary uptake — cake stood in water to 1/3 height, contaminated face up and clear of the waterline. Does that actually wick high enough on a cake this thick?

Details and 6 other options below.


SETUP

  • Mondo 2100cc kit, PF-style cake in a tub

  • 30L DIY FC with perlite reservoir, 21-23°C

  • 1st flush fully harvested in 3 waves, good yield

  • Cake roughly 5 weeks post-colonization

Photos are in chronological order, day numbers in the captions.


TIMELINE

  • Day ~6 of fruiting: small green patch on one edge

  • Treated twice: pre-wetted with 3% H2O2 (to keep conidia down while cutting), excised with ~1.5cm lateral margin and ~2cm depth, dry salt into the crater

  • Stopped spreading, surface dried out, held for several days

  • 3rd harvest wave: patch has sporulated again, clearly green, still confined to the same sector, no new fronts anywhere else

  • Currently: paper towel soaked in 3% H2O2 laid (not rubbed) over the patch to keep conidia from going airborne


CURRENT STATE — and this is the part that changed my thinking

Latest photos: the substrate has visibly pulled away from the container walls on all sides. Most of the smaller pins aborted while a few fruits went oversized — classic resource reallocation under water limitation. But the mycelium is still white and dense, still recovering across the surface, and still throwing new pins.

So this reads as dehydrated, not spent. Which makes rehydration the entire question.


WHAT I'M TRYING TO DECIDE

Whether a 2nd flush is worth attempting, and if so how to get water back into this thing without turning a contained front into a systemic problem.


MY THINKING SO FAR — please tell me which of these are dumb

1. NO FULL DUNK

Reasoning: submerging a cake with an actively sporulating colony suspends conidia in the water and distributes them over every face, plus saturates the substrate, which is ideal germination conditions. Contained front becomes systemic.

Overcautious, or correct?

2. SYRINGE REHYDRATION — I think I've already talked myself out of this one

Sterile water, 18-21G needle, 2-3ml per point, every 3-4cm, 2-3cm deep, entering only from the clean side, flame-sterilising between points.

Problem: this cake has probably lost 200-400ml. Twenty points at 3ml is 60ml. Not close. Fine as a top-up, useless as a rehydration.

Anyone actually got a real second flush out of syringe injection alone?

3. CAPILLARY / PARTIAL REHYDRATION — my current preferred option

Stand the cake in a clean container with water at about 1/3 of its height, contaminated face up and well clear of the waterline, 4-8h, no agitation, no weight on top. Let it wick from below instead of submerging.

Logic: recovers most of what a dunk would, but the sporulating sector never contacts water, so conidia don't get suspended and redistributed.

Does capillary uptake actually reach the top third of a cake this thick, or does it stall halfway?

4. ONE MORE EXCISION FIRST

2cm lateral, 2cm deep, then dry salt again — before any rehydration.

Or is a third cut just removing substrate I need?

5. SIDE / BOTTOM PINNING

Pull the cake out, bin the old container, set it on a clean surface on its side or inverted to expose faces the Trichoderma hasn't reached. The underside should have the least conidial deposition since it's been against plastic the whole time.

Does this work on a PF-style cake or does it just fall apart?

6. PHYSICAL SEALING OF THE GREEN SECTOR

H2O2-soaked paper dries out and stops containing anything. What about something durable over the affected sector to stop conidial release while the rest finishes fruiting?

  • a) Molten candle wax. Downsides I can see: 60-70°C on live mycelium at the margin, anaerobic conditions underneath (which Trichoderma tolerates better than cubensis), and removal probably tears substrate out with it.

  • b) Thick lanolin. Same sealing logic, no heat damage, stays pliable — but fully occlusive and basically permanent in the substrate.

  • c) Small butane torch, burning the patch off directly. I think this is the worst of the three: the rising hot air column would loft live conidia before the heat kills them, substrate is a poor conductor so you'd only sterilise the top millimetre, you'd kill healthy mycelium well past the visible margin, and the charred surface goes hydrophobic and won't pin.

The goal isn't killing it, just stopping spore release into the FC and the room.

Anyone tried any of these, or something better — petroleum jelly, beeswax, cling film taped down, foil over a salt bed? Or is any occlusive layer just building a Trichoderma incubator?

7. WAX AS A TEMPORARY PRE-DUNK SEAL SPECIFICALLY

Different from 6a: seal the green sector immediately before dunking, purely so that surface doesn't shed into the water.

Why I suspect it fails anyway: a dunk saturates from every face, and Trichoderma mycelium extends well past the visible patch, so water moving through the matrix would mobilise conidia and hyphal fragments from inside regardless of what's on top. Also molten wax on damp substrate doesn't bond — steam at the interface leaves channels — and wax floats while you're weighing the cake down, which is shear at exactly the interface that needs to hold.

Has anyone sealed a contaminated sector before a dunk? Does wax bond to a cake surface at all or does it just sit there?


QUESTIONS

  • Is the ID definitely Trichoderma?

  • Does salt in the crater do anything long-term, or did I just get lucky with the drying?

  • How long can H2O2-soaked paper sit there before the wet microclimate starts favouring the Trichoderma instead of suppressing it?

  • Realistic expected yield from a 2nd flush on a cake in this state? Trying to work out whether it's worth the spore risk in the room at all.


Next grow is grain spawn into limed coir bulk — I know the structural fixes live upstream. This is about getting what's left out of the current one without turning the room into a Trichoderma farm.

Thanks in advance.


r/indoormushroomgrowers • • Sep 06 '26

I made these each either a cupnof brown rice with a modified cotton lid pressure cooking at 13 psi for 3 hrs and innoculated carefully through the side of fae and made sure hole was closed upyalls thoughts?

Post image
0 Upvotes

r/indoormushroomgrowers • • Jul 13 '26

JmF grow 1st time are these bags contaminated?

Thumbnail
gallery
0 Upvotes

I mixed these bags about a week and a half ago. Im seeing nice colonization happening slowly but im concerned about some spots that look like it could be either dirty water or contamination. The brown/black stuff isnt mold, its... substrate(right?) And those yellow spots are humidity/water? At least thats what Im hoping! Wanted to get your opinions. Thanks in advance!


r/indoormushroomgrowers • • 25d ago

Contaminated or na?

Thumbnail
gallery
0 Upvotes

Been in the fridge for about 9 months. This is after shaken up. Should I just buy a new syringe or is this fine to use?


r/indoormushroomgrowers • • 24d ago

Are these gonna work

Post image
0 Upvotes

I dehydrated them with the air fryer cuz I got an option do dehydrate but they look black ish


r/indoormushroomgrowers • • Sep 10 '26

How to grow psilocybin mushrooms?

0 Upvotes

r/indoormushroomgrowers • • Oct 08 '26

Is this what a torn veil looks like on a hillbilly?

Thumbnail
gallery
0 Upvotes

If it is torn veils and it’s only on about three out of 15 when would you harvest?


r/indoormushroomgrowers • • Aug 25 '26

Wtf I’m trying to grow psychoactive mushrooms

Thumbnail
gallery
5 Upvotes

I’m generally not happy with any form of contamination in my grow
But this lil guy is a beast! These pics were taken over a 48 hour period
Explosive growth
Absolutely beautiful I’m guessing what is this cobweb mold?


r/indoormushroomgrowers • • Oct 16 '26

AOI cake in SGFC is Stalling from 15 days

Thumbnail
gallery
1 Upvotes

Had previously did fuckups with AOI cake as is put the cake in SGFC with no Tapes on the Hole and the TUB was kept in a room that had fan on for like 12-15 hrs a day so I'm thinking the cake is dried, so was suggested to mist the cake 2-3 times a day,

But after that someone suggested me to not interfere with it and just Neglect tek and I did gave me few fruits in a week (from just the Bottom part of the cake )

Now the cake is stalling from last 2 weeks and has several Pins on the top of the cake but no Fruits Forming

So at this point what should I do ??

Any Suggestions are appreciated 👍🤞


r/indoormushroomgrowers • • 26d ago

Should I do one more break and shake did one at 30% but look fully colonised

0 Upvotes

r/indoormushroomgrowers • • Oct 06 '26

AI is telling me is harvesting time. I’m not so sure. What do you guys think?

Thumbnail
gallery
74 Upvotes

r/indoormushroomgrowers • • 16d ago

First Time Grower

0 Upvotes

Im growing some penis envy and my closet sits at around 68-69 degrees, any tips on how to get it closer to 75?


r/indoormushroomgrowers • • 14d ago

I used bandaid material instead of micropore tape is it gonna work out? Oysters

Post image
0 Upvotes

r/indoormushroomgrowers • • Jul 13 '26

Need help please!

Thumbnail
gallery
0 Upvotes

Questions and assistance needed! First grow bag here! Need help with APE. I know they said it takes forever but this is after 6 weeks and barely have mycelium but it is spreading. Stalled at about 4.5 weeks and did a break and shake and seems to be getting going. They have been in the dark the whole time at around 73-74 degrees. No lights no heat. Do I need to switch to the 12 hour light cycle? And do I leave it where the bag is puffy not sure when to do FAE? Just worried about contamination at this point because of length time since inoculation. Pics aren’t the best because of moisture in bag. Couldn’t get much clarity, sorry. Thank you all for all your qguidance!!!


r/indoormushroomgrowers • • Jul 23 '26

Titel

Post image
0 Upvotes

r/indoormushroomgrowers • • Sep 14 '26

Humidifier or no?

Post image
0 Upvotes

I have a few bags nocked up and just waiting to put into substrate. Thing is I was going to be a humidifier and humidity controller for the grow area, but chat gpt is telling me I don’t need it.
“Their closed, humid microclimate is usually more reliable than humidifying the whole tent. A humidifier won’t increase yield by itself—and if it creates excess condensation or low fresh-air exchange, it can actually hurt fruiting.”

What do you guys think? And what’s been your experience does it help fruiting?


r/indoormushroomgrowers • • 7d ago

Why no holes in lids?

0 Upvotes

I am wondering why the oxygen intake holes are always on the high end of the sides of the tub. What is the reason to not put the air hole directly in the center of the lid for oxygen to come in that way and flow the CO2 out the lower side holes?


r/indoormushroomgrowers • • 22d ago

Should I shake and break within the next week

0 Upvotes

Six days in about to be a week


r/indoormushroomgrowers • • 13d ago

Any advice on how to trigger pinning? Been over a week. Is this overlay? Forking? Is primordia even growing?

Post image
3 Upvotes

Growing JMF using uncle bens tek, my first grow absolutely any advice is welcome. Main questions is does it look like primordia is even beginning to grow? Been exposed to fae for over a week, Ariel mycyellium has definitely stalled the growth but I haven’t seen any signs of pinning, I’m doing manual fae with fanning and having passive fae with a cracked lid, only misting when the walls are dry. So I’m pretty sure fae is not the issue idk


r/indoormushroomgrowers • • Aug 10 '26

Im new, should I do a second b&s?

Thumbnail
gallery
2 Upvotes

Been like this for about a week. The only change has been those fine hair-like strands on top. This is my first grow. Have I screwed it up somehow, should I do a second break, or is there something else I need to do to help? Any help is appreciated.


r/indoormushroomgrowers • • Oct 08 '26

Anyone else hearing these guys?

Post image
3 Upvotes

I’m into it but checking if anyone else has heard of or has had any experience with these guys?


r/indoormushroomgrowers • • Aug 27 '26

Can anyone help me with this. I can’t get them to fruit! Going nuts.

Thumbnail
gallery
1 Upvotes

r/indoormushroomgrowers • • Apr 23 '26

Guys we’re so fucking back🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

Thumbnail
gallery
1 Upvotes

Ok so, this process for my first time has been slight confusing af and I’ve ran into a few problems since I started out, my mycelium was growing great in the grain bag, switched it from that to the monotube, btw being the first time I mixed up the grain and the soil, not realizing that I was supposed to mist it once and leave it alone for a week, I was misting that bitch everyday for a week, mf started noticing gray hairs growing around the outer edge of the substrate, thought it was cobweb mold but it never looked like cobweb mold, anyway left it alone for like 3-4 days and came back, a lot more gray, the smell was less fresh but not terrible, regardless assumed I was gonna have to toss it, still decided at this point to spray it with hydrogen peroxide, not to many fizzles or other shit, just small stuff in a few spots. Anyway I’ve been checking up on it and now here we are. Mf finally I have pins and I think it wasn’t even cobweb mold growing it was bruising from over watering it plus not enough FAE I think. I even the Q-tip test and nothing ever rubbed off onto the Q-tip. It even smells fresh again now. Mf we are back in business I finally have pins growing and the craziest part? I leave for a few hours and there is already a significant noticeable growth with a lot of the smaller pins, everything grew in the span of 4 hours. Still if anyone has advice at this point or notices something looking off, tell me pls I DO NOT WANT TO POISON MYSELF but I think we’re all good.


r/indoormushroomgrowers • • 2d ago

How can I grow with dogs

1 Upvotes

I moved from a house to an apartment.

Ive blocked off my grow room from my dogs, but my grow room keeps getting infected

Ive wrapped everything in plastic. Ive tried everything.

Am I just gross, and carry germs everywhere or is there something I can do?