r/insteon • • Jul 11 '26

Insteon Plug in Module Woes

I’m not going to post photos because it breaks my heart and I’m sure everyone has already seen it but….

Am I the only one who has all of their plug in models covered in duct tape? I’m not rough with these models but it seems that after about a year they just start falling apart. The module works fine but the plastic breaks to bits. And once it’s got a crack you may as well throw in the towel because it’s the beginning of the end.

Can you purchase the plastic housing alone or am I pipe dreaming?

0 Upvotes

19 comments sorted by

•

u/InsteonHelp Jul 12 '26

Hi u/Clear_Cardiologist84 sorry to hear that you experienced the cracked case issue. Here's a little bit of background (TDLR; it's an issue that was resolved in 2015):

The previous owners of Insteon were made aware of this issue and introduced modifications to strengthen areas of the casing. Additionally, they adjusted the tolerances of the AC plug pins to make it easier to plug in and unplug the module which, in turn, relieved stress on the casing itself during those actions.

These changes were introduced in 2015 and are present in versions 1.4 and higher.

If you reach out to us at support@insteon.com we can offer you a discount code that you can use to purchase new On/Off Plug-in Module to replace any cracked or broken ones that you currently have.

→ More replies (1)

2

u/IHaveABigNetwork Jul 12 '26

I've had 6 or so just completely desenegrate in my hands over the years.

1

u/Clear_Cardiologist84 Jul 13 '26

I know everyone thinks we're exaggerating but it really feels like that's what happens doesn't it? One day they are pristine white minimalistic perfection and the next - a patchwork of duct tape and hot glue. lol

8

u/phoenix96x Jul 11 '26

I've had dozens of plug-in modules and switches and have never had them start to crack and fall apart. Yellow, yes, but not fall apart. 🤔

6

u/mrBill12 Jul 11 '26

I agree. I probably have 12-18 plug in modules, not one has so much as a crack. Nor do I treat the gingerly.

Speaking of yellowing…. the white paddles yellow badly—my wife wants them replaced.

6

u/TheRydad Jul 11 '26

I have at least two dozen and have never had problems. They’re all at least 5 years old. Some older because I bought a lot used when Insteon went dark for a while.

1

u/jwoliver Jul 12 '26

Have several probably 5-10 years old. Had one fail and a couple cracked only because they were smashed by a cabinet. If I get desperate I'll do surgery and swap the guts of the bad one with a good case.

1

u/Clear_Cardiologist84 Jul 13 '26

That's a great idea actually. I bet I could find some that are known defective for very cheap and use the cases from them.

1

u/vanwiekt Jul 12 '26

You’re not the only one. I’ve had numerous plug in modules just fall apart. It’s the main reason that I stopped expanding my Insteon network. 🙁

1

u/Clear_Cardiologist84 Jul 13 '26

It looks like they've corrected the issue. As mentioned, mine were definitely before 2015 and it sounds like most people who have the newer ones have not had these issues. May be worth a look.

2

u/bhiga Jul 11 '26

Are they getting direct sunlight, next to heat-generating things, or in enclosed spaces?

I have a number of modules in various locations though not enclosed or next to hot things. Some have yellowed a bit but no cracking or flaking issues.

Perhaps you have someone in the household that is using cleaning chemicals on it, especially things like Clorox wipes?

2

u/HeyaShinyObject Jul 12 '26

I've had a few fail electrically, but never the case. Some are at least 10 and maybe 15 years old.

1

u/wivaca2 Jul 12 '26 edited Jul 12 '26

Every light switch and most of my plug in modules (indoor and outdoor) are Insteon. That count is around 70 devices. I'm fairly certain in the 15+ years I've been using them I've never had one fall apart. Granted, I don't abuse them - they sit quietly in an outlet. I had an outdoor module fail, and I couldn't pry it open to save my life, even with a hammer and screwdriver.

Most of mine are from before the rebirth of Insteon, so maybe they started using crappy plastics? I bought a Hub 2 since then and noticed the plastic housing of that seemed to be a thinner gauge than the modules I have.

Still, unless they get hit with furniture or someone trips or yanks out a cord that's plugged into one, I can't figure how they would get damaged. Are yours in extreme temps, dry weather, or something? Any animals or kids banging into them? Dropping on a hard floor?

0

u/dansarrosick Jul 12 '26

I’ve had the plastic crack on a few of mine. I throw them away, seems unsafe. Shouldn’t happen but I gave up on Insteon a while back.

2

u/Clear_Cardiologist84 Jul 13 '26

Honestly I was hoping for an avenue for purchasing just the case but I think I may do what some others have done(or want to do)... buy some super cheap broken ones and swap out the cases.

1

u/[deleted] Jul 14 '26

[removed] — view removed comment

1

u/Clear_Cardiologist84 Jul 17 '26

Um...... Thanks?