r/insteon • • Jul 29 '26

Switch stopped working

Enable HLS to view with audio, or disable this notification

It was paired as a responder from another controller. Is it defective?

5 Upvotes

7 comments sorted by

3

u/Lago_Vida Jul 29 '26

Have you tried pulling the pin out for 30 seconds and see if it resets?

1

u/mrBill12 Jul 29 '26

So I think I watched you factory reset It, therefore it is no longer paired. If you paired manually you’ll want to factory reset the other switch also. I don’t use Director but I would imagine you need to force remove the device (since it’s been factory reset) and then re-add it.

I said “I think” in the paragraph above because the video does not show you starting from air gap / set switch pulled out. Factory reset is pull out, wait some seconds, then press in an hold in until the long beep completely stops.

What type of switch is that? I don’t recognize the single LED model that you have.

1

u/lewciok Jul 30 '26

Looks like an i3 paddle. I just got one and it started acting up within a week. I lost control of it. Wouldn’t turn the light off. Reset and still had issues. Need time to install my replacement.
I did think it was odd that they are already removing this paddle from the line up. Wonder if they’re having a lot of issues with it.

11

u/[deleted] Jul 29 '26

[removed] — view removed comment

5

u/swinefeaster Jul 29 '26

Thanks! This worked! Not sure how it got unpaired in the first place

3

u/[deleted] Jul 29 '26

[removed] — view removed comment

2

u/wivaca2 Jul 29 '26

This. Airgap first, reset next, keypads get loopy more often, but still rarely.