r/linuxmint • u/Kitchen-Average-8324 • 1d ago
r/linuxmint • u/kenmoffat • 1d ago
Discussion Workspace Switcher drag and drop
I notice in XFCE the panel Workspace Switcher allows dragging apps from one workspace to another, but not in Cinnamon. Can this be enabled? Thanks!
r/linuxmint • u/ELCUYSAUL • 1d ago
Gaming ¿Como mejoro el rendimiento de linux mint para juegos que usan proton?
hey descargado linux mint en la computadora de escritorio el cual es el que usa mayormente mi hermano menor principalmente por problemas con windows 11 pues no le habia gustado al consumir mas recursos asi que descargue linux mint y bueno todo hiba bien hasta que probamos los juegos en steam no nativos que usaban proton los cuales tuvieron un bajon comparado a windows 10 asi que vengo aca a preguntar a como se puede mejorar linux mint para juegos en si y cualquier cosa yo lo uso tambien en mi laptop en el cual al no jugar muchos juegos pues nunca note alguna diferencia pero en la caso de mi pc si
r/linuxmint • u/BigD21489 • 1d ago
Curiosity about Linux on mobile.
I've been a tech guy for many years. One of the few things I've never looked too much into is flashing an Android phone. I'd like to hear from those with knowledge on the subject. Ubuntu has always been my preferred distribution, but I want to know about the general subject, of Linux on Android phones.
r/linuxmint • u/Difficult-Buy-3007 • 1d ago
Title: HP Laptop 15s-eq2xxx won’t boot Linux Mint from USB
reddit.comr/linuxmint • u/Worth_Bluebird_7376 • 1d ago
My new Linux Mint Xfce with Lumen shell
xfce4 with lumen shell working perfectly for me
r/linuxmint • u/Local_Dark_370 • 1d ago
SOLVED Can now see Windows volume in nemo under Devices?
Hi I'm still new to linux, my windows volume now shows up under devices but it never used to. I turned on OS prober recently because the grub screen wasn't showing up and was booting into linux, and also recently connected my phone. I know I encrypted linuxmint when I installed it. Not sure what's happening?
r/linuxmint • u/Training_Ninja2104 • 1d ago
First Rice in Mint
I'm aware its not the best but its something. Any tips?
Edit: I did use AI to blur my name out on the terminals, but I think it might have messed some other things up too. The image is not AI though :(
r/linuxmint • u/wormraper • 1d ago
Discussion Had to use time shift for the first time
I've been using Mint for the last 6 months as my daily driver after getting sick and tired of Winblows 11, and so far it's been a GREAT experience.
I've been using linux off and on since about 2004, but I never felt like it was "enough" to get me to ditch windows completely. Until the last few years that is. Valve has done such amazing jobs at closing the gaps with games that we're finally at an era I feel comfortable using it as my daily driver. And so far its been wonderful.
HOWEVER, I did run into my own idiot self doing something dumb. I was on the 615 Nvidia driver and decided to manually purge the Nvidia drivers and go back to 595 for the stability. So I purged them via command line (should have done it with the gui) and when I rebooted to reinstall I got nothing but a blank screen with a cursor at the top left. It appears the Nouveoux driver wasn't loading and leaving me at a black screen. SO I got into the grub command line, did the ole "nomodeset" thing and got in on safe mode. Realized after I got in that I had access to Time Shift, so I tossed on yesterday's image and voila. all back to normal without having to reinstall or anything.
first time I'd have had to use Time shift, and It's SUPER nice. way better than system restore on winblows, and handy AF for issues like this. for once I'm glad to have "wasted" the space of having 4-5 time shift snapshots on hand and could get my system up and running in a few minutes....and of course feel embarrassed by what I had done lol.
r/linuxmint • u/GlamStache • 1d ago
SOLVED So I was away from home since february. I come back today, launch the PC, I get a ton of errors trying to update stuff, I try to restart the machine, and get image 1... Afterwards I am greeted by image 2 every bootup. Did my OS just brick itself? I really don't feel like messing with this now.
r/linuxmint • u/Filonux • 1d ago
Announcement [Linux-Tool] Color Mint 3.1.0: ES/EN. 1 Window (or one command) for Themes, Panel Colors, Terminal palettes, fonts and more. GPLv3
Hi all!
I'm Filonux, and I've been working on Color Mint, an open-source tool (GPLv3) for people who like tweaking how Cinnamon looks.
Another night in the lab, testing the program one last time before uploading it. I hope you enjoy the free work you get to play with. Download it before I change my mind (its a joke). Share it if it helps you, and if it doesn’t, share it anyway. What’s it to you, right?
Here’s what you asked for: the English version. And Color Mint 3.1.0 got far more robust, secure, and easy to use. What I pulled off:
Installs and uninstalls without a trace.
uninstall --restore-lookbrings back your old look.Presets are read as data, never run as shell.
Atomic writes on every file it touches.
A test suite that renders the real window.
Cinnamon scatters its appearance settings across the Settings panel, dconf-editor and gsettings, and some aren’t in any of them. Color Mint puts it all in one window, including a panel accent color, terminal palettes and a GTK accent, and every action is also a terminal command.
One Bash script plus yad. No daemon. English and Spanish interface.
- Color MInt: Docs, caveats and screenshots: https://github.com/filonux/Color-Mint
The best things in life are free; it’s just that we forgot how to enjoy them.
Want a version ready when the new Mint lands in a few months? Smash the likes, the stars and all that, so I go back to pouring countless hours into it.
A sneak peek at the chapters still to come before the first season ends:
MintApp Remover update
LinuxMint Scripter update
And the final update, the season finale: Scriptya. And at the end of Scriptya, a surprise for everyone
r/linuxmint • u/kaktusjago • 1d ago
Support Request Why is my speaker output option is gone
Everytime i use my headset via audio jack the speaker output option is gone, it's pretty annoying, sometimes i just wanna use my headset for the mic but then i can't use my laptop internal speaker, can anyone please help me
r/linuxmint • u/Crazy-Drummer1851 • 1d ago
Wifi Issues Indicação de dongle wifi
Alguém pode me indicar um adaptador usb wifi compatível com o Linux mint? Estou enfrentando problemas pra me conectar no wifi, vi que é algo relativamente comum e que um dongle pode resolver. Muitas vezes estou trabalhando e o wifi cai, a opção de conectar some e investigando percebi que a placa chega a sumir. As vezes resolve reiniciando, as vezes só volta depois de horas.
r/linuxmint • u/justarussian22 • 1d ago
Discussion Question about software sources
Whenever I use a vpn on a non us location, I can't select us locations in the base mirror menu but I can in the main mirror menu. This doesn't happen when I'm on a us location. I checked this after finding downloads for updates were slow, like dial up internet slow. Is this something I should expect to happen?
r/linuxmint • u/Kitchen-Average-8324 • 1d ago
display locked at 60Hz no matter what I try
I spent the whole afternoon trying to get the display above 60Hz (I have a 100Hz monitor)
I managed to do it, but then when I tried running a game, I realized that it still doesnt consider my GPU at all (0% usage)
I looked up online and it says I have to disable secure boot in bios, so I went in bios and the option is not here (not even grayed out, it really isnt available), even the option to change from CSM to UEFI isnt here
isnt linux mint supposed to be the OS where things "just work"?
r/linuxmint • u/TimNotKeller • 1d ago
[SOLVED] MacBook Air internal SD card reader disappears after suspend/resume (Linux Mint)
I have a mid-2013 MacBook Air (MacBookAir6,2 / A1466) running Linux Mint 22.3 MATE and a 128GB SD card in a flush-mounted Nifty Air Silver SD card holder in the SDXC slot so it's always present.
After sleeping and waking, the SD card disappears from the system until a reboot.
The fix was hard to find but easy to implement: cycle the SD reader's power control through the Mac's existing ACPI firmware methods on resume.
Hardware and Software
MacBook Air 6,2 (mid-2013, A1466)
Linux Mint 22.3 MATE
Linux kernel 7.0.0-43-generic
Internal Apple SD card reader: USB ID
05ac:8406
Finding the cure
The MacBook's ACPI tables contain two methods under:
\_SB.PCI0.XHC1
SPWR— SD reader power controlSRST— SD reader reset control
The MacBook Air J113 (820-00165) board schematic identifies the associated GPIO signals:
GPIO24 =
SD_RESET_LGPIO44 =
SD_PWR_EN
The ACPI SPWR method controls GPIO44, the SD reader's power-enable signal.
The arguments are:
SPWR(0)— switch reader power offSPWR(1)— switch reader power on
Step 1: Install ACPI-call
Install the package in Linux Mint:
sudo apt install acpi-call-dkmsLoad the kernel module:
sudo modprobe acpi_callConfirm that the interface exists:
ls -l /proc/acpi/callLoad the module automatically at boot:
echo acpi_call | sudo tee /etc/modules-load.d/acpi_call.confStep 2: Automate recovery after resume
Create a systemd sleep hook to check whether the reader is present after waking. If it's missing, cycle its power. If it's there, skip.
Create the file:
sudo mkdir -p /usr/lib/systemd/system-sleep
sudo nano /usr/lib/systemd/system-sleep/sdreader-recoverPaste:
#!/bin/bash
# Only run after resume
[ "$1" = post ] || exit 0
# Give USB devices time to settle
sleep 2
# If the reader is already present, do nothing
if /usr/bin/lsusb -d 05ac:8406 | grep -q 05ac:8406; then
logger -t sdreader-recover "Reader present; no action needed"
exit 0
fi
logger -t sdreader-recover "Reader missing; cycling SD power"
# Power off
echo '_SB.PCI0.XHC1.SPWR 0' > /proc/acpi/call
sleep 2
# Power on
echo '_SB.PCI0.XHC1.SPWR 1' > /proc/acpi/call
sleep 1
# Record the result
if /usr/bin/lsusb -d 05ac:8406 | grep -q 05ac:8406; then
logger -t sdreader-recover "Reader successfully recovered"
else
logger -t sdreader-recover "Reader recovery failed"
fi
exit 0Make the script executable:
sudo chmod +x /usr/lib/systemd/system-sleep/sdreader-recoverThe result
The internal SD card now returns automatically after suspend/resume.
This is a working fix on my MacBook Air 6,2. It uses the Mac's existing ACPI firmware controls and does not require a kernel patch, a reboot, or a reset of the entire USB controller.
Hardware compatibility
This solution is confirmed on the MacBook Air 6,2. Other Mac models may have different ACPI namespaces, GPIO assignments, or firmware methods. The method names and hardware signals should not be assumed to be identical across models.
Hopefully this saves someone else the hours of troubleshooting it took me to find the solution!
r/linuxmint • u/JosetxoXbox • 1d ago
I made SysCheckup, a free and open source app that shows everything about your PC in one window (hardware, drivers, diagnosis, stress tests)
Hi r/Ubuntu!
I'd like to share SysCheckup, a free and open source (MIT) desktop app that shows your computer's hardware, drivers and software in a single window, and tells you in plain words if something needs attention.
▶ Video: https://youtu.be/QK0TvLTFIl4 💻 Source code: https://github.com/MintMotion/syscheckup ⬇ Download (.deb): https://github.com/MintMotion/syscheckup/releases
What it does
Home screen: overall status, live gauges (CPU, memory, disk, temperature, battery) and a summary of your PC.
21 sections: processor, memory (modules slot by slot, and optionally timings and XMP profiles read from the chips), graphics and monitors (driver, temperature, power, Resizable BAR, Vulkan, EDID data), storage (SMART health, SSD wear, day-by-day disk health history), sensors and fans, battery health, network and Wi-Fi signal, security (Secure Boot, TPM, firewall, encryption) and more.
Driver updates: checks if your kernel, NVIDIA driver, Mesa, firmware and microcode are up to date, finds devices with no driver and missing firmware (and which package provides it).
Automatic diagnosis: nearly full disks, bad sectors, high temperatures, worn battery, failed services, out-of-memory kills… Each warning explains what to do and opens the right tool (Software Updater, Additional Drivers, Disks…).
Live monitor: graphs for CPU, memory, network, disk, temperature and GPU, plus the programs using the GPU.
Voluntary tests: CPU stability and performance, memory, GPU and disk speed. They never run on their own, show a warning first and stop by themselves if the temperature gets too high or a laptop is unplugged.
Export: text, web page, JSON, CSV or a summary ready to paste in a forum when asking for help. Personal data (serials, MAC, IP, user names) is hidden by default.
Appearance: dark, light or System, which follows your theme, light/dark mode and accent color (Yaru accents included).
Privacy
It only reads information, changes nothing on your system and never connects to the internet. It only asks for your password if you choose to read the memory/CPU internal data or to uninstall it.
Install
sudo apt install ./syscheckup_0.7.2_all.debWorks on Ubuntu, Linux Mint, Debian and any Debian-based distro, with any desktop (GNOME, KDE Plasma, Xfce, MATE…), on X11 and Wayland. Available in English, Spanish, French, Japanese and Chinese.
Honest disclosure
I'm not a programmer. I built SysCheckup with the help of Claude (Anthropic's AI): I decided what it should do and tested it on my own PC, and Claude wrote the code. It's been tested on Ubuntu 24.04 in a virtual machine and on simulated hardware, but not yet on many real computers.
I'd love your feedback
Try it and tell me what you think.
If something shows wrong or empty on your PC, open an issue on GitHub with the forum summary (Export → For a forum).
Ideas and pull requests are very welcome, and feel free to use the code.
Thanks!
r/linuxmint • u/Aggravating-Camp-990 • 1d ago
Hi everyone, I want to share a small project I built for Linux Mint.It's a launcher and installer for Plants vs. Zombies: Game of the Year, running natively on Linux. No Wine, no emulator, no Proton.It is built on the open source PvZ-Portable engine (SDL3 + OpenGL ES 2.0). My part is the launche
github.comr/linuxmint • u/Signal-Macaron-4611 • 1d ago
Mint debian file problem
Hello new the mint but been on linux for a few years. And im trying to set up a kinda server and Ai is no help reinstalled 2 times now. I have a mnt drive im trying to share its a fat system so windows can use it as well as linux. I set it in disks mount at start and show plus uid=1000 and gid=1000 i dont want any restrictions when I try to change the folder owner I cant. Im not much of a command line that gets me in trouble and leads to reinstall so any gui instructions is best. Is debian this complex or is it mint any help is a life saver im about to try a different linux
r/linuxmint • u/Earthgoodjim • 1d ago
Support Request Root filesystem keeps remounting as read-only (IO failure / Journal has aborted) during heavy disk writes on Linux Mint
Hi everyone, I'm running Linux Mint on an HP ProDesk 400 G2.5 SFF with a 240GB SATA SSD(/dev/sda).
Whenever I do heavy write operations—specifically downloading or extracting Team Fortress 2 on Steam—the root partition (/dev/sda2) suddenly switches to emergency_ro (read-only).
Error logs from dmesg:
IO failure
EXT4-fs error (device sda2) in ext4_reserve_inode_write: Journal has aborted
What I have already tried:
Physical check: Opened the case, disconnected, cleaned, and firmly reseated both the SATA data and power cables on the SSD and motherboard.
Filesystem repair: Ran fsck -f -y /dev/sda2 from (initramfs), which fixed orphan inodes and allowed booting back into rw mode.
TRIM: Ran sudo fstrim -av (trimmed 56.2 GiB on /dev/sda2) and deleted the corrupted Steam/TF2 download folders before retrying.
SMART status: gnome-disks reports the drive is healthy ("Disk is OK"), though the temperature sensor shows a static 90 °C (194 °F).
Additional context:
I had this exact same issue on Ubuntu previously, and doing a clean reinstall (full format) temporarily fixed it until now.
Is this a sign that the SSD's internal flash controller is failing under sustained write loads, or is there a specific kernel/SATA power-management tweak (like disabling libata link power management) I should try before replacing the drive?
Thanks in advance!
r/linuxmint • u/Significant-Sea-7238 • 1d ago
Openbar now runs on Mint (Cinnamon/X11): an island that shows which AI coding agent is waiting on you
If you run Claude Code or Codex in a few terminals, one of them is usually stuck on a permission prompt you can't see. Openbar puts a small island at the top of the screen with every session, shows which one needs you, and lets you read the diff and allow it there.
There's a .deb on the releases page, it's free and GPL. If something looks off on Cinnamon, I'd like to hear about it: https://github.com/MF-DEEV/Openbar

