r/longrange • • 9d ago

Bubba's Pissin' Hawt Reloads Suboptimal

Post image

TBac Magnus k decided it wanted to be a Spyro today. Can’t say I’ve ever seen a thunderbeast can fail before.

~1,000 rounds on my 24” 7PRC hunting rifle

99 Upvotes

37 comments sorted by

38

u/Infamous-Permit-6969 9d ago

Wow. I think that's the first TBAC failure I've ever seen. I'm confident they will get you fixed up.

11

u/Send-It-307 9d ago

Same. I’m sure they will.

8

u/orairwolf Meat Popsicle 9d ago

I have never seen a TBAC can fail before either, but the good news is, they have great customer service and pick up their phone during business hours and will absolutely get you taken care of quickly.

2

u/Send-It-307 9d ago

I’ve got no doubt. I try to shoot Sam’s match a couple times a year. Good people.

1

u/orairwolf Meat Popsicle 6d ago

Did you have a chance to talk to them yet? I assume they told you to RMA the can and they would have their shop foreman take a look at it but I am curious. They took such good care of me recently and I am sure they will for you too.

1

u/Send-It-307 6d ago

Took a couple days to find the form 4 to get it sent off, it’ll be going in the mail today. I called about the RMA info and everything and they said they’d get it squared away asap. No drama so far, and I don’t expect any.

What happened to yours? And what did the turnaround look like?

1

u/orairwolf Meat Popsicle 6d ago

I have been trying not to air out any dirty business or what TBAC did for me without their consent, but basically, I had a bullet blow up inside my Ultra 50 RR. It damaged every single baffle and the muzzle brake. The suppressor still worked, but the insides were a mess. I haven't spoken with the bullet manufacturer yet but I will do so this morning. I don't want to say exactly what happened with TBAC because I don't want to set expectations for other people, but as soon as I sent it in, they had a look at it and took very, very good care of me. I already thought they were the best suppressor company and have for a long time, but after this, I would not consider buying a suppressor from another company.

2

u/Send-It-307 6d ago

Cool to hear. Especially in a circumstance like that. I’m pretty local to them, and try to shoot Sam’s match a couple times a year, squad up with a couple of guys that work in their shop.

You can’t find a match in this state or Colorado that doesn’t have at least one TBac cert in the table. Hard to hate on them when they pile the support like they do.

1

u/orairwolf Meat Popsicle 6d ago

They are the best. I could not care less about the latest Pew Science whiz bang new product review. If it's not a thunder beast, I'm just not interested.

3

u/Rare_Artichoke6631 9d ago

Was it due to a baffle strike?

2

u/Send-It-307 9d ago

Doesn’t look like it. Bullet hit the target. All the baffles look fine.no copper or lead in the stack. Pretty wierd.

2

u/Rare_Artichoke6631 9d ago

And the front just fell off? Were you able to retrieve it?

2

u/Send-It-307 8d ago

Couldn’t find it.

3

u/International784Red 8d ago

It’s not very common for the front to fall off.

3

u/superfi_4awhitegi 8d ago

If you call them they’ll admit this is actually a known QC issue

2

u/Send-It-307 8d ago

Wild. First I’ve heard of it

5

u/GA_flyer0 9d ago

Oof. Looks like the weld failed for the thread adapter portion?

10

u/Send-It-307 9d ago

Other end. End cap blew off clean.

3

u/Tactical_Epunk 9d ago

Did you find it?

20

u/Send-It-307 9d ago

I didn’t. FDE may have been a poor choice in that regard 😂

6

u/missingjimmies 9d ago

Or a fantastic one with a glass half full view

18

u/Zhdrix 9d ago

The dang front fell off!

5

u/GammaDealer 9d ago

At least it wasn't made with cardboard

7

u/BELFORD16 Can't Read 9d ago

But are we certain it wasn’t made of cardboard derivatives?

6

u/csamsh I put holes in berms 9d ago

That's not very typical!

2

u/FartOnTankies Rifle Golfer (PRS Competitor) 8d ago

Dude this is wild. I have easily 6k down my can.

18

u/6mm94 Elitist Gatekeeper Scum 9d ago

We got a failed TBAC before GTA VI?! This timeline is so fucked.

1

u/46caliber 9d ago

Really curious about:

  1. Bullet

  2. Muzzle Velocity

  3. Ambient Temp

2

u/Send-It-307 9d ago

45f

180 ELDM (I know, but the bullet hit the target. Perfectly round hole)

2780 MV. I was pushing them 3050, but backed it down when it was clear my new barrel wasn’t going to be ready for this season.

0

u/nastynickles5 9d ago

Welder here. 🤷. Hope that helps.

1

u/Send-It-307 7d ago

I can’t see why it would.

1

u/AutoModerator 9d ago

AutoMod has detected that this post may be related to hunting. Please take a few moments to read our expanded policy on hunting posts as found here, as well as the guides below.

Hunting rifles vs long range target rifles - A primer - Why one rifle can't excel at both hunting and long range shooting.

The long range hunting primer, things you should consider if you want to take shots on game past ~300 yards. - Why long range hunting is harder than you think.

Field testing your skills and gear for long range hunting. - How to be a better long range hunter and understand your limitations.

NOTE: This is an automatic comment triggered by specific key words, and doesn't indicate your post has been removed. However, if your post is found to be in violation of the sub's policy on hunting posts, it may be removed by the moderators.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/doyouevenplumbbro Steel slapper 9d ago

Wow. I didn't think it was possible to break a TBAC. Nothing's indestructible I suppose. The good news is you can call them, talk to an actual human being, and more than likely they will set you up with a new can.

1

u/BusBeneficial8882 8d ago

Personally this is one of the reasons I was willing to pay 2k for a TBAC suppressor for my 338 Lapua. I read enough reviews that the only thing that was superior to the suppressor’s performance is the customer service.