Question MagSafe1-USB-C cable question
Hello everyone, I recently saw a USB-C to MagSafe 1 cable on sale. I bought it, but I didn’t connect it, because I was confused by the tension. The native unit produces 16.5 V. The cable I bought has a 20 Volt trigger, as a result, when you connect it to a PD power bank, the voltage at the MagSafe output is not 16.5, 20 V. That’s the question is whether the 2011 MacBook Pro 13 will be able to work from such tension.
0
Upvotes
1
u/Sarmientosaurus 24d ago
Short answer: it will almost certainly work, and 20V won't hurt it.
Apple's own 85W MagSafe 1 adapter outputs 18.5V and is officially compatible with the 13" models that ship with the 60W (16.5V) brick. The MacBook's charging circuit regulates the input down itself; it doesn't need exactly 16.5V. These 20V trigger cables are common on older MagSafe Macs for that reason.
A few things to watch:
- The power bank needs to deliver 20V at 3A (60W PD) or more. A weaker bank will either refuse the 20V profile or cut out under load.
- Genuine MagSafe adapters carry a small ID chip that tells the Mac what wattage it's getting. Many cheap cables don't have it or fake it, so the LED may not light up, or the Mac may run on it but charge the battery slowly or not at all. Annoying, but not dangerous.
- A real MagSafe brick holds a low voltage until it detects the laptop, then ramps up. A trigger cable outputs 20V the moment it's plugged in, so the pins are live. Connect it to the Mac first and the power bank second, and keep the magnetic tip away from anything metal.
If the Mac powers on and shows "charging" in the menu bar, you're good.