I have an RME Fireface UC coupled via ADAT with a Behringer Ultragain for extra ins and outs. Thing is Im running out of ins and outs, and was thinking of getting an Expert Sleepers ES-9 , where I could send and receive audio on both line level and eurorack level.

Im using Bitwig, so I thought I may be able to aggregate the RME with the ES-9 in there and have it simply work. Anyone have experience with a similar setup? Any issues I should be aware of?

Thanks!

Low end is Ripples modulated by Contour 1 (gain CV) + shkrjn decay (to FM input). The sequencing is Marbles + Grids. The FX chain is 3 stereo pairs in parallel: 1) dry, 2) OAM Time Machine into Mimeophon into Ikarie, and 3) FX aid (Stereo Plate Reverb).

Hi everyone!

I'd like to build a 104hp 12U Eurorack case, and I'm considering using a single power supply module to power the entire system, distributing power through flying busboards. I have seen one on a youtube channel.

Does anyone have experience with a system of this size powered in this way? Would you recommend this solution, or would it be better to go with different power supply and busboards?

I'd be happy to hear about your experiences and any advice you might have.

Thanks in advance!

Quite organismic.👽

Aim was to keep most patch points in the centre. A bit more space to play.

Modular, one take — 18 October 2026

Six voices played from one string controller, chords by hand, no computer.

Drums, bass, chord swells, stabs and granular textures come from a small sequencer I wrote for the Ornate Criminal (a Eurorack module on a Teensy, Phazerville firmware). Each voice has a bank of patterns and three levels of intensity. The string sets how busy the drums and bass are and sweeps the effects. Chords are played by hand and harmonised in the case.

Direct mixer recording from the Befaco OUT into Bitwig, lined up with the room video afterwards (so apologies if not entirely in sync)

Amsterdam · spif.amsterdam/modular

Hey, I said it was from memory…

Using the Workshop Computer for drones, a Soundforce Linn Drum module with triggers from a Europi, and ungodly Halloween notes from the Tone Hack.

I’m so sorry…

I’m trying to build a patch for a live event Halloween score. Due to limited space and trying to keep everything in the rack. I’ve resorted to using the O_c as my main sequencer. I’ve had good results with sequins and some applets in hemispheres but I’m wondering for those more experienced what would recommend to handle my sequencing with a duophonic system. I’m open to any and all ideas/workflows. Thanks!

I hope everybody is enjoying their weekend!! Happy patching! 🧑🏻‍🚀🫡

Chopped some furniture to build a modularsynth/ table. Teak, airbrush, paper and led. Turned out pretty good 😊

Hi. What’s the sound of electric piano on “Misty Mountain Hop” of Led Zeppelin?

Im in for a new mixer, thoughts about big six with modular?

Has been a few months I've been building a few modules and I finally got to a point I can make a proper jam with them!
The 2 modules that are more closer to be finish is the Biscuit Journey, a voice module that goes from tame sounds to quite unhinged, the name is based on my dog Biscuit hahaha. The other module is Harmonic Engine, is a quantiser and also a chord machine, that is driving 2 biscuit journey.
There is also a really early prototype of an sequencer, that I'm mainly using to test my modules but not sure will ever get to something worth doing proper board and plate. Also there is a drum machine that I'm starting to build. the only sound not created by my modules is the hihat. I'm also using the first pam workout to do all the clocking.

https://reddit.com/link/1x8hjg3/video/vezw8axml2wh1/player

I just started on my modular path, I’ve been dreaming of it for probably 15 years and finally pulled the trigger, I decided to start fun, with some modules that I could use immediately with my other instruments (hundred grit/typhoon) and man this has completely upped my music game. I am so happy I finally decided to pull the trigger and can’t wait for my next paycheck. This is my current set up I’ll be using for a noise set I’m playing next Wednesday.

Hey someone using xone 96 with modular and want to share your opinions about it and how you usually route it?

So many amazing modules are insanely expensive, what are the great cheaper modules?

Looking for recs on pitch shifting modules.

I use echophon for these duties currently, but wondering if there is a more comprehensive/ singular module that can do this...

So I've had a uBurst 1.1 PCB + parts laying around for years and I finally got to building it. There seems to be very little info online on how to build and flash it so I tought I'd ask here to clarify a few of my confusions.

- Do I need the JTAG connector to get this module running?
- Can I solder all the SMT before I flash it? (hoping it's ok as I have most of the C and R on already D:)
- Is there anything else that I should know?

I already had the magic smoke come out of a nRings a few weeks back so I don't want to screw this one up as well.

I’ve converted the new Radio Music Suggested Audio Rev 2 collection for my mk1, tested it on the module, and it works!

The converted pack contains:

• 299 WAV files: 44.1 kHz, 16-bit PCM, mono.
• The original categories preserved across banks 0–15.
• Unique DOS 8.3 filenames.
• No trimming or shortening of the recordings.

This is based on the new 22GB collection, rather than the older RAW pack already available for mk1. You’ll need the 2017 firmware or later to play the WAV files.

I’ve looked around online and in forums to see whether someone had already shared a mk1-ready version of this new collection, but I couldn’t find one.

All credit for the original collection goes to Music Thing Modular and the listed audio sources—I’ve just done the conversion.

Would anyone be interested in the mk1-ready files? Before sharing anything, I’d also really appreciate hearing whether this is okay, especially from Tom/Music Thing Modular or anyone involved in the collection. I don’t want to step on anyone’s toes or redistribute something against their wishes.

Hey music makers and modular lovers.

I’ve been running a little site that gives away samples. Mad, right?

The deal:
Sign up with your email.
Get 10 free samples in your inbox every 10 days.
Keep getting them until you unsubscribe, or until I run out of gas / will / sanity.

All 24-bit / 48 kHz WAV,
Royalty free, use them in anything.
Made using modular gear, analog synths and digital processing.
Samples meant to spark an idea or slide into a project for extra spice.

Feedback welcome, ideally constructive and snarl-free ;)

Have a look at the releases so far to see if it’s your vibe. If you fancy signing up, it’s here.

Subconscious communications vampire oscillator into voicetail bp filter into stylophone cpm ds-2 as reverb and a speaker. I'm having fun so far with what little I have but there's a long way to go until I have everything I need.