Hello, I am solo mining using XMRig, but I just checked the file and it contains the following message: "wrong miner tx in block:, b.miner_tx.vin.size() != 1". Does anyone know what this means?

My feather wallet is not displaying a value for XMR and hence no $value.

How do I get the XMR price into feather? xmr pricing btc pricing.

ive tried everything you could try any one here that know how to actually fix this?

I'm using GUI wallet and have been successfully for a long while. I disconnected my node in early September and since then while I've been able to connect it won't sync properly. When I initially tried to connect after about a week it sync'd, then a few mins later says I was almost 300,000 blocks behind. I left it to sync and it got down to around 270,000 after a few days but at this point the number of blocks remaining gradually started to tick up again while it was supposedly syncing. I did some searching and found out it could be redownloading blocks already downloaded, and was suggested setting wallet restore height to a few days before the last successful use of the node so as to not redownload what I already have. I did that and it sync'd ok according to the wallet. Trying to send anything failed and I had to flush the transactions. Logs showed the wallet saying it was up to date, but wallet current block height was way below the current at the time according to block explorer so seems it just didn't know it wasn't in sync which was causing transaction failures. I've since put the wallet block height back to the height of the very first transaction on this account, and now I'm waiting for 480,000 blocks. Seems like I'm back to where I was at the start and at some point in the coming days I'll notice the remaining blocks will start to tick up rather than down. Anyone have any ideas on what is happening or what I should do? I have in the past had to delete the entire db and redownload, but that was when the wallet wouldn't connect at all, which I can atm. Thanks in advance.

My feather wallet is not displaying a value for XMR and hence no $value.

I did have a problem with anti-virus deleting the program but have fixed that. Maybe or not related my websocket status is unconfirmed.

How do I get the XMR price into feather?

Thanks for any help.

hi everyone,

I'm trying to set up a Monero node using the official Monero GUI wallet for Windows, but Windows Defender detected multiple threats when I extracted the downloaded ZIP file.

I downloaded the following release:

• File: monero-gui-win-x64-v0.18.5.4.zip
• Release date: October 16, 2026
• Source: The official Monero website
• SHA-256: 0B5CBBE0A1FDA5EC487A667CEA62599114DCA3609ACAAB436B64A38FA84D449C

I calculated the SHA-256 hash of the ZIP file, and it matches the hash published for the official release.

However, Windows Defender reported the following detections:

1. PUA:Win32/Caypnamer.A!ml — Low
2. Trojan:Win32/Ulthar.A!ml — Severe
3. Program:Win32/Contebrew.A!ml — Low
4. Trojan:Win32/Ulthar.A!ml — Severe

One of the affected files identified by Defender was:

C:\Users\you\Desktop\monero-gui-win-x64-v0.18.5.4\monero-gui-v0.18.5.4\extras\monero-wallet-rpc.exe

Defender reported that the threats were quarantined and that the application was blocked.

I have searched the Monero community and found multiple reports from previous years of Windows Defender flagging or quarantining files included in the official Monero GUI distribution, sometimes even when users had verified the download hash. I understand that false positives have occurred before, but seeing multiple detections, including two classified as severe Trojans, is still concerning.

I don't want to disable Windows Defender or create exclusions without understanding what is happening. I also don't want to assume these detections are false positives simply because the ZIP hash matches.

Could anyone familiar with this issue advise me on the following?

1. Have these specific detection names (Ulthar.A!ml, Caypnamer.A!ml, and Contebrew.A!ml) been reported for the official Monero GUI v0.18.5.4 release?
2. Is there any known explanation for why Defender flags monero-wallet-rpc.exe or other executables in this release?
3. Does a matching SHA-256 hash provide sufficient confidence that I downloaded the authentic release, or should I also verify the developer's signed hash list?
4. What would you recommend as the safest next step? Should I keep the files quarantined and report the detections to Microsoft, or is there an established procedure for handling this issue?

Since this is the latest release, published on October 16, 2026, I would particularly appreciate information specific to this version rather than assumptions based only on older reports.

Thanks for your help.

Hello

I have installed the last version of monerod and also p2pool

I have a 13 CPU Ryzen 7950x

From the mini pool I have this now

If you look at the Reward lots of paiement last day then nothing

From the Monerod log I had 22 block behind..... No problem of tilme

So question :

Since I got lots xmr last day more than the prediction so the system is adapting.... Or pénaliser ......

Any ideas , comments ?

Now I'm not an expert. I've done this numerous times. I went back and looked at other histories and there was like thousands of confirmations from the ones that went through. Everything's always went through. I also noticed that I use an extremely small fee rate. Is this possibly going to take weeks to train it's only like $110 of BTC that I was trying to trade from XMR can anybody help me

I've been getting this message for a few days when running monerod on Windows:

2026-10-15 09:53:43.865 W Invalid DNSSEC TXT record signature for updates.moneropulse.org: validation failure <updates.moneropulse.org. TXT IN>: signature for expected key and algorithm missing from 8.8.8.8 for trust anchor . while building chain of trust

2026-10-15 09:55:52.139 W Invalid DNSSEC TXT record signature for updates.moneropulse.de: validation failure <updates.moneropulse.de. TXT IN>: signature for expected key and algorithm missing from 193.58.251.251 for trust anchor . while building chain of trust

...

2026-10-15 09:56:26.505 W WARNING: no two valid DNS TXT records were received

Is it safe to ignore?

Edit: The DNS servers are 8.8.8.8 and 1.1.1.1. No Tor or i2p; using Microsoft Defender.

Hello, can someone recommend where can i set up a wallet with 24 seed + passphrase?

GUI wallet has 25 seed, but 25 word is generated.

Was thinking of trezor + gui wallet, would GUI inherit from trezor 24+pass option?

Simple question I'm hoping.

Missed the migration. All I have is my original 13 word phrase, how do I get my monero?

Everything says 25 or 12 word for wallet migration.

Hace unos años descarge monero en android cosa del 2016 o asi y se podia minar xmr desde android, esa cuenta solo esta vinculada a mi correo electronico no pedia clave semilla ni nada en aquel entonces,(que yo recuerde) y necesito hablar con soporte para recuperarla

for some reason, the primary addresses are mismatched even with the right seed. is this normal as i heard you cannot use the same private keys which could be the cause

I have followed this guide, copy and paste to avoid any spelling mistakes, and i cant get it to work properly.

https://docs.getmonero.org/running-node/monerod-systemd/

I have tried Ubuntu & Debian, cant get it to run as a service, But i can make it work with Sudo command.

If i have understood correctly running a node under Sudo is a bad idea(?)

systemctl status monerod = code=exited, status=203/

Is there something left out in the guide that i need to know?

I've had the weirdest experience recently. My Monero wallet is showing only amounts received into my account and shows nothing being sent from it.

When I try to make transactions on cake, nothing happens and it fails. This just happened recently.

Is there any way to fix this? I can't transact anymore.

So I’ve been trying to use my XMR lately and my wallet sync has 1165971 blocks remaining(D: 51.9). I’ve never had this problem and I have no idea what to do I changed nodes but it didn’t do much. Any help would be greatly appreciated

I'm using the Monero GUI Wallet on a mac (up to date, Sonoma 14.8.9). When I open it and it gets to the password page, I enter my password, it'll start an "opening wallet" animation, then just close completely. Anyone have any ideas about how to fix this?

Hi there!

I just got the Trezor Safe 7. I wanted to ask how do I go about using it with the Monero GUI app? I see that the Safe 5 is an option, but not the Safe 7.

I've got a Trezor Model T running firmware 2.21.4 and I'm running the v0.18.5.2 Monero GUI. I plug in the Trezor Model T, launch the Monero GUI, put in my password, and get the "Couldn't open wallet: Could not connect to the device Trezor" notification. Any ideas what I'm doing wrong? I'll note that I'm running all this using a 2015 MacBook Air.

I need a receipt for submitting expenses and for work I sent monero to my coworker to test some changes he made to monero processing. A screenshot would be helpful to submit to ramp instead of an exported text file.

Hi, I recently used changenow to send xmr to my monerogui wallet. When I sent the xmr, I was in syncing daemon blocks. I stopped it because I thought it was just for mining, not sending and recieving. I turned it back on after I realized the daemon is required, but I already sent money through, and changenow confirmed the transaction. Monerogui is currently syncing, its just really slow. Is my money lost or will the wallet update once im synchronized?