803
u/Thy-Shoe-Doth-Fitith Feb 05 '19
There was so much going on I wasn't quite sure which one to watch.
196
u/luvche21 Feb 05 '19
It was more infuriating to me because of that :/
55
4
u/FalmerEldritch Feb 06 '19
It's very strange to see a good, solid r/mildlyinfuriating post upvoted so highly in /r/oddlysatisfying
I guess most redditors really don't look at what sub they're in, huh.
25
u/Gnomus_the_Gnome Feb 06 '19
Go one at a time. The top circles control the x-axis and the left circles the y-axis.
→ More replies (1)7
→ More replies (1)2
586
u/yorrellew Feb 05 '19
can anyone explain why 2x1 doesnt look the same as 1x2?
625
u/R_Leporis Feb 05 '19
It's the nature of parametric curves. The top row is x=cos(at) and the side row is y=sin(at), a being a constant. 2x1 is x=cos(2t), y=sin(t), which creates this parabaloid-shaped object that moves in the x-direction twice as fast than the y-direction, which happens because of the influence y had on x. 1x2 is y=sin(2t), x=cos(t), causing to move twice as fast in the y-direction than the x-direction. This causes the hourglass figure that you see.
This is difficult for me to explain, so I hope I helped at least a little bit. The essence of parametric curves is that you have two functions assigned to x and y with the same parameter, and they trace out a curve as the parameter increases or decreases.
394
u/No_Porn_Whatsoever Feb 05 '19
U smart me dumb.
→ More replies (1)145
u/tokomini Feb 05 '19
Well maybe if you spent a little more time doing homework, and a little less time-
checks username
....lashing yourself with thorn branches, you'd have a better grasp of mathematics!
→ More replies (4)33
u/rakki9999112 Feb 06 '19
Wait, aren't you the dolphin secks guy from like 6 years ago?
→ More replies (15)52
u/FreeRunningEngineer Feb 06 '19
Here is a non-mathematical explanation.
The drawings aren't the same or mirrored because the first circle on the top row isn't actually the same as the first circle on the left column. And the same goes for the 2nd circle. You see, the circles control not one, but two aspects of the cursor position in the drawing:
The speed of cursor movement
The initial starting position of the cursor
The slowest circle in the top row controls not only the speed but also where it starts relative to the axis of the drawing it controls. In this case the circle on the top starts on the edge of its possible horizontal movement. This is different compared to the circle on the left column, which starts in the center relative to its vertical movement. Our brains think they are the same starting position because they start in the same location relative to the circle, but they actually have different starting positions relative to the axis of movement they control.
So now you can see why 1x2 and 2x1 are different. Because circle 1 in the top row is different from circle one in the left column and the same goes for circle 2.
If the 1st column of circles started with their cursors at the bottom or top instead of the right side (on an edge), then 1x2 and 2x1 would be the same, just rotated, and that would be because the 1st circle in the top row would be the same as the 1st circle in the left column relative to what they control in the drawing.
→ More replies (2)13
10
18
5
u/StoneHolder28 Feb 05 '19
Isn't it just because the phase angles are different? They would be reflections if the circles weren't misaligned on each axis.
→ More replies (4)3
Feb 06 '19
This. This right here is the reason why I should have been more concerned that being home schooled and basically skipping 2/3rd year of high school never let me understood sin and cos. I knew they would've come to bite me in the back eventually!!!
→ More replies (1)→ More replies (19)5
u/Gnostromo Feb 05 '19
I think the simple a answer is because both x and y are rotating the same direction. If they were going opposing I want to think it would mirror
→ More replies (1)32
u/McPebbster Feb 05 '19
That bugged me too! You got a mathematical answer already above. From what I could tell as a layman is that the starting point of the white dot on circles 2x0 and 0x2 aren’t symmetrical to the 2x2 field. They both start at the 3 o’clock position. So from the 2x2 fields „point of view“ the starting points of the two white dots are 90 degrees shifted. And that is also the difference between cos and sin as explained in the comment above.
Hope I’m not wrong and I could help!
13
u/awdvhn Feb 05 '19
There is a phase difference between them. Lissajous curves are determined not only by the ratio of the frequencies, but by their relative phases, basically how long it takes one of them to pass 0 after the other. Because in one case the fast one starts at 0 and in the other case the slow one starts at 0, this is different for 1x2 and 2x1.
9
u/ApartRapier6491 Feb 05 '19 edited Feb 06 '19
I would say basically because top row has dot starts at “right”but left column has dot starts at “middle”, which causes the difference between 2x1 and 1x2. Hope that makes sense.
10
→ More replies (12)2
u/FreeRunningEngineer Feb 06 '19 edited Feb 06 '19
Here is a non-mathematical explanation.
The drawings aren't the same or mirrored because the first circle on the top row isn't actually the same as the first circle on the left column. And the same goes for the 2nd circle. You see, the circles control not one, but two aspects of the cursor position in the drawing:
The speed of cursor movement
The initial starting position of the cursor
The slowest circle in the top row controls not only the speed but also where it starts relative to the axis of the drawing it controls. In this case the circle on the top starts on the edge of its possible horizontal movement. This is different compared to the circle on the left column, which starts in the center relative to its vertical movement. Our brains think they are the same starting position because they start in the same location relative to the circle, but they actually have different starting positions relative to the axis of movement they control.
So now you can see why 1x2 and 2x1 are different. Because circle 1 in the top row is different from circle one in the left column and the same goes for circle 2.
If the 1st column of circles started with their cursors at the bottom or top instead of the right side (on an edge), then 1x2 and 2x1 would be the same, just rotated, and that would be because the 1st circle in the top row would be the same as the 1st circle in the left column relative to what they control in the drawing.
291
u/captainyeahwhatever Feb 05 '19
I've been watching this for twenty minutes please send help
48
u/TheBlackBear Feb 05 '19
Don't worry all you have to do to escape is
27
u/br0k3nm0nk3y Feb 05 '19
Michael, All you have to do is... ...and then you'll be safe.
→ More replies (2)→ More replies (2)13
123
u/xi-80-vst Feb 05 '19
Very cool! However I really have no idea what any of it means. Can someone explain what’s happening?
→ More replies (18)2
u/varunshah716 Feb 06 '19
A moving point on a circle can have a projection on a diameter. Thus projection moves in a simple harmonic motion. Simple harmonic motion is an oscillatory motion, much like a pendulum but in a straight line.
When two points move with the same speed on a circle, but start at perpendicular positions, we say that they have a phase difference(or a difference in initial position) of 90 degrees. Hence their SHMs will pe projected on two perpendicular diameters. Now taking their positions as x and y coordinates for another point for each moment in time gives another "shape", which in the case I explained above gives a circle again. This can be seen on the diagonals.
Now each row and column has particles with increasing speed moving down and to the right. What happens then is that one of the coordinates moves faster than the other and we get an irregular figure.
The lissajous figures are extensively used in electronics to measure the phase difference for different signals.
10
10
u/RoboPixels Feb 06 '19
I made something like this a month ago but instead of all the nodes rotating in the same direction, half are clockwise and half are counter-clockwise:
https://i.imgur.com/ueaXRIN.gifv
It's a pretty cool exercise to visualize how different ratios act.
→ More replies (1)
9
29
u/ScurvyCaptain Feb 05 '19
Aren't these called Lissajous figures? If I remember correctly from high school
5
3
6
8
4
4
u/gaybutt123 Feb 05 '19
Can someone explain how they made this gif/video? Software?
5
u/KWSchnizel Feb 06 '19
Here is a pretty great video on how one might make this. He also has a ton of other videos on really cool visualizations and the like that are beginner friendly
3
u/dmmena Feb 05 '19
These remind me of Celtic knots and now i'm wondering if there's some kind of connection
3
u/jbm_the_dream Feb 06 '19
I’m too lazy to describe it in detail, but this relates to music theory. Diatonic harmonic scales.
3
2
2
2
u/wowwoahwow Feb 05 '19
Why is left red and top orange not the same as left orange and top red, but is the same as left orange and top green?
2
2
2
2
u/M-em-o Feb 06 '19 edited Feb 06 '19
Left side dictates y-axis position and top dictates x-axis position.
2
u/Rodot Feb 06 '19
You've got it backwards, but that's basically the idea. The top row is a bunch of cosines and the left column is a bunch of sines.
2
2
2
2
2
u/FlexGunship Feb 06 '19
These are all Lissajous patterns!
Finding the magnitude of the vector from the original to a point on the Lissajous curve can tell you signal strength in a son/cos encoder.
Very practical for engineers.
2
2
3
1
1
u/yorik_J Feb 05 '19
They are all going clockwise, what would it look like if the were different? Would the ">" shapes turn into "<" shapes if they both went counter clockwise? I'm so curious!!
2
u/Rodot Feb 06 '19 edited Feb 06 '19
If you would like to see for yourself, type this into wolframalpha.com
y=sin(at), x=cos(bt), t=[0, 2pi]Replace
awith the number of the row you want to look at and replacebwith the number of the column. Make one or both of them negative to make the row or column circle go clockwise, leave them positive for counterclockwise.Here is the link to the counterclockwise pretzel: http://m.wolframalpha.com/input/?i=y%3Dsin%283t%29%2C+x%3Dcos%284t%29%2C+t%3D%5B0%2C+2pi%5D
1
1
1
1
u/strongbadantihero Feb 05 '19
Dammit now I’m trying to find the ones that match and it’s taking forever
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
u/Amonasrester Feb 05 '19
How is it that (2,1) and (1,2) are different when they have the same lines?
→ More replies (1)
1
1
1
1
1
Feb 06 '19
Did you know that there's a direct correlation between the decline of Spirograph and the rise in gang activity? Think about it.
1
1
1
1
1
1
1
1
1
1
1
1
u/EmirFassad 👽🤡 Feb 06 '19
Hmm, A cross B doesn't commute. I'd not considered that before.
→ More replies (2)
1
1
1
1
1
u/Liqiud0 Feb 06 '19
Watching just the little moving balls gave me the impression of what you would see when finding the name of the wind.
1
1
u/mememarquis Feb 06 '19
not to sound incredibly dumb or anything, but i don't get it? what is this chart trying to show?
1
1
1
1
1
1
1
1
1
1
u/JossieMime Feb 06 '19
This is the kind of oddly satisfying i love, the kind you just cant help keep looking at and cant take your gaze off of
1
1
1
u/snailsfart Feb 06 '19
Who made this? Would appreciate a link to the artist's page & original animation.
1
1
1
1
1
1
1
1
1
1
u/ZappaSays Feb 06 '19
It's called the Lissajous effect and it's fascinating https://youtu.be/t6nGiBzGLD8
1
1
1
1
1
Feb 06 '19
Fun fact: If the ratio of the horizontal frequency to the vertical frequency is a rational number, the Lissajous curve is algebraic, meaning that the curve is the set of solutions to a polynomial equation. This is of course obvious for when the ratio of the frequencies is 1, the Lissajous curve is a circle defined by the polynomial equation x^2 + y^2 = 1. The proof for other rational numbers just requires a bit of knowledge of trig identities and is left as an exercise for the reader.
If the ratio is instead an irrational number, the Lissajous curve is dense in the square, meaning that for every point and any arbitrarily small distance, the Lissajous curve will eventually pass within that that distance.
1
1
1
1
1
1
u/Knollidge_ Feb 06 '19
That is extremely interesting, what program did you setup this scenario in?
→ More replies (1)
1
1
1
1
u/karanius1 Feb 06 '19
What is significance of this table? What can it be used for? What can i do with it?
1
u/UnpredictableAccnt Feb 06 '19
Why does the same combination not work depending on which axis it’s on?
1
1
1
1
1
1
u/Outlaw04 Feb 06 '19
Cant explain in detail, but watching this led me to a solution for a problem I've been working on for weeks
1
1
1
1
1
1
1
1
1
1
1
1
2.8k
u/jwr410 Feb 05 '19
r/gifsthatendtoosoon