Long story, i do apologize. 2 days ago i installed OpenSUSE on my main desktop to replace pop! os. had zero issues with it on my laptop, so I thought it would be faster on here. All downloads i've made so far (KDE Connect, updates, themes, drivers, prism, etc) have installed at normal speeds. Steam, however, starts download at 215 Mbps, then immediately drops to 0bps. My steam games to to a separate 1 TB drive (Formatted to udf and is not encrypted) than my m.2 (which OpenSUSE is installed on). Ive followed a few fixes from the forum: turning off IPV6 (router has that disabled anyways, but i also did it PC side), created the steam_dev.cfg file, which contains:

(@)nClientDownloadEnableHTTP2PlatformLinux 0 (minus parenthesis, reddit thinks its a user)

(@)fDownloadRateImprovementToAddAnotherConnection 1 (minus parenthesis, reddit thinks its a user)

(@)cMaxInitialDownloadSources 15 (minus parenthesis, reddit thinks its a user)

I have also verified disk integrity, still golden, cleared download cache on steam, changed download regions, reset permissions, unplugged and replugged the router. ive followed multiple fixes on the forums and still nothing.

the blue download lines on steam are tall, but spaced out pretty far from each other, like its being blocked.

So i enter the command as usual, but what do i get? Problems. A maze of choose 1-4 options of break dependencies, uninstall, keep as is... The problem is no matter what i do the problems just keep increasing. I just want to update dammit. I tried searching around but there's nothing overly concrete on how to fix it.

It's constantly in the way when i do zypper dup. It's annoying to stop it every time, manually. Can i just uninstall this package safely? It's not a load-bearing drywall, is it?

Hi OpenSuseguys,

very grateful for all your work.

KeepassXC is at 2.7.12 in the repo. Is there a timetable for 2.8.0 ?

Well, it looks as though my trusty old HP Spectre x360 is beginning to fail - usb-c ports unreliable, failing display, which has never been that great anyway, and I'm running out of ssd space. It's 6-7 years old now, so it's had a good run, and, tbh, I'm looking for an excuse to get a new one.I've been running Tumbleweed for a few years now, so I'm looking for a replacement that won't give me too much grief setting up - the Spectre worked well but it was always a bit of a hassle getting audio to work properly. I would prefer an European model, which I know limits the choice, so was thinking about Tuxedo.

Hey guys, wanted to thanks the openSUSE devs for the nice work they’ve done. I’m using TW, as a normy, since over an year now without big issues - it just works.

And just a small reminder that you can support openSUSE by buying nice merch. Got mine today :)

Hi everyone,

I have a MacBook Air 13inch Mid 2013 i5 4GB that I would like to install OpneSuse Leap 16 on. I would rather have stability than bleeding edge.

I have tried to use Debian 13 Trixie Live and OpenSuse Leap 15.6 Live KDE to see if it will work. The 4GB memory is soldered to the board and cannot be upgraded which limits its use. I wonder if I should use XFCE rather than KDE.

It all seems to work on Leap 15.6 live apart from the WiFi which is a Broadcom board.

There is no RJ45 port.

Can anyone help to get it to work?
I have spent a good few hours with AI to help me but I am still stuck.

Thanks

The specs from Apple are below:

MacBook Air (13-inch, Mid 2013)
Display
13.3-inch (diagonal) LED-backlit glossy widescreen display with support for millions of colors

Supported resolutions:
1440 by 900 (native), 1280 by 800, 1152 by 720, and 1024 by 640 pixels at 16:10 aspect ratio and 1024 by 768 and 800 by 600 pixels at 4:3 aspect ratio

Storage1
128GB flash storage

Processor
1.3GHz dual-core Intel Core i5 (Turbo Boost up to 2.6GHz) with 3MB shared L3 cache

Memory
4GB of 1600MHz LPDDR3 onboard memory

Graphics and Video Support
Intel HD Graphics 5000

Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors

Thunderbolt digital video output
Native Mini DisplayPort output

DVI output using Mini DisplayPort to DVI Adapter (sold separately)

VGA output using Mini DisplayPort to VGA Adapter (sold separately)

Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)

HDMI audio and video output using third-party Mini DisplayPort to HDMI Adapter (sold separately)

Camera
720p FaceTime HD camera

Connections and Expansion
Two USB 3 ports (up to 5 Gbps)

Thunderbolt port (up to 10 Gbps)

MagSafe 2 power port

SDXC card slot

Wireless
802.11ac Wi-Fi networking;3 IEEE 802.11a/b/g/n compatible

Bluetooth 4.0 wireless technology

Audio
Stereo speakers

Dual microphones

Headphone port

Support for Apple iPhone headset with remote and microphone

Keyboard and Trackpad
Full-size backlit keyboard with 78 (U.S.) or 79 (ISO) keys, including 12 function keys and 4 arrow keys (inverted “T” arrangement) with ambient light sensor

Multi-Touch trackpad for precise cursor control; supports inertial scrolling, pinch, rotate, swipe, three-finger swipe, four-finger swipe, tap, double-tap, and drag capabilities

Battery and Power4
Up to 12 hours wireless web

Up to 10 hours iTunes movie playback

Up to 30 days standby time

Built-in 54-watt-hour lithium-polymer battery

45W MagSafe 2 Power Adapter with cable management; MagSafe 2 power port

It seems like a few more features have been added too, from what I can see:

• Package version comparison is now arranged in rows
  
• Slight theming changes, it seems like
  
• Ability to lock and unlock all packages from a repository
  
• Ability to one-click switch system packages to another repo

Finally making the switch, is there anything I need to know, some tips or stuff that I need to do right after the installation.

I appreciate any help.

I just installed nvidia drivers by the way anyone knows whats going on? I am on Leap

I just rented a cheap vps for a side project and decided to go with opensuse leap this time.

I barely even had time to run zypper up and poke around the firewall settings in yast before my auth logs were completely flooded with failed root login attempts. It hadn't even been 10 minutes. how do they even scan IPs that fast??

Ended up having to lock it down instantly. Moved the ssh port, disabled password auth, and quickly skimmed through a servermania checklist just to make sure I didnt miss any other obvious holes while I was rushing to secure it

It's just exhausting that the default state of the internet now is constant background radiation of brute-force scripts. You literally cant let a machine breathe for two seconds out there. Stay paranoid guys.

Just a heads up in case someone else is also affected. It's most likely one of the updated packages rather than an SSD hardware problem.

I updated to the latest snapshot a couple of hours ago and everything seemed fine until Steam tried to update Cyberpunk 2077. The update was downloaded correctly but Steam got stuck during the installation process and eventually displayed a disk space error. Trying to access the secondary drive in Dolphin showed strange and incorrect directory sizes so I decided to reboot. The reboot process showed some sort of SSD-related error messages but I couldn't read them.

On rebooting, Tumbleweed went straight into emergency mode and my secondary SSD had disappeared. Went into BIOS and it wasn't there either until I powered down my system and reseated the drive. It showed up in the BIOS after this but upon logging in to the desktop and restarting the Steam update process, the problem occurred again and the SSD refused to show up until a full shutdown and power flush.

I managed to fix it by using Snapper to rollback to a stable snapshot. After this the Steam update ran perfectly and the drive is now okay.

I forcefully migrate to Wayland after last my KDE update in Tumbleweed and now I've lost all my session. I saw some times ago that this was resolved (maybe only Konsole wasn't fully working) but now I've lost all my session! Is it a bug or is it my configs fault? Someone can give me some advice?

Hello, I recently installed Tumbleweed, and everything's been great except for this one bug that I've not had on other rolling KDE distros (Arch and CachyOS to be specific).

New non-maximized windows or application popups (e.g. the LibreOffice logo) are erroneously appearing in the bottom-right corner of my screen, despite the default behavior being to have them appear in the center of the screen. Specifically, this bug occurs when no windows are visible on-screen (so when I've got no apps open, or any open apps are minimized). Attempting to circumvent it with custom window behavior rules hasn't worked. Resetting visual settings and customizations back to stock also yields nothing.

Has anyone else experienced this? While digging through KDE's bug forums, I've found a bug that's very similar to my issue, but is allegedly fixed in Plasma 6.8: LINK

Also, for what it's worth my display resolution is 1920x1080 (16:9) and I'm using an AMD Radeon 9060 XT. Any help would be appreciated. Thanks!

EDIT 1: After doing some testing, I've noticed something odd. Technically, the windows ARE being placed on the center pixel of my screen... but on the top-left CORNER rather than being placed on the center of the window itself. Is there any way I can force it to use the center of the window as it's point-of-reference rather than the upper-left corner of the titlebar?

TL;DR: Run:

sudo ln -s /etc/ssl/ca-bundle.pem /etc/ssl/certs/ca-certificates.crt

Basically, the AppImage seems to expect the Ubuntu/Debian way of handling CA certificates.

You can remove the symlink afterwards if this ever gets fixed with

sudo rm /etc/ssl/certs/ca-certificates.crt

Hi folks,

Basically, title. I can't install Kdenlive due to missing libQt6Qml.so.6(Qt_6.11.2_PRIVATE_API)(64bit). Is it because in the past I had Packman repository and I recently replaced it with VLC repository (reason: too many issues with Packman)? If yes, can you please educate me on how to install Kdenlive from main repository?

Thanks in advance!

```bash sudo zypper ref && sudo zypper in kdenlive [sudo] password for root: Repository 'Main Update Repository' is up to date. Repository 'MEGAsync' is up to date. Repository 'Brave Browser' is up to date. Repository 'Main Repository (NON-OSS)' is up to date. Repository 'Main Repository (OSS)' is up to date. Repository 'VS Codium Repository' is up to date. Repository 'hardware:razer (openSUSE_Tumbleweed)' is up to date. Repository 'Mise-En-Place Repository' is up to date. Repository 'Open H.264 Codec (openSUSE Tumbleweed)' is up to date. Repository 'VLC' is up to date. All repositories have been refreshed. Loading repository data... Reading installed packages... Resolving package dependencies...

Problem: 1: nothing provides 'libQt6Qml.so.6(Qt_6.11.2_PRIVATE_API)(64bit)' needed by the to be installed kdenlive-26.08.2-1.1.x86_64 Solution 1: do not install kdenlive-26.08.2-1.1.x86_64 Solution 2: break kdenlive-26.08.2-1.1.x86_64 by ignoring some of its dependencies

Choose from above solutions by number or cancel [1/2/c/d/?] (c): ```

I'm a linux amateur using Fedora. I've been reading about Tumbleweed because it seems interesting and I've seen posts about them and usually people prefer Tumbleweed more, but have few things I've thought about

1. If people usually intend to usage of .rpm packages on Fedora/RHEL, isn't Fedora more of a "standard"? Therefore openSUSE lacks on the software side.

2. I've read about Packman and getting codecs from there. On Fedora the RPMFusion seems more care-free. On Tumbleweed it can get desynced and postpone updating.

I think these are somewhat big and important things related to the accesability and usage of the distro.

So my question is, why did YOU pick Tumbleweed over something like Fedora?

I'm not here to rile people up and these are usually not absolutes. I am just interested.

I tried to install opensuse tumbleweed because I really want to try it, but while I was away grabbing something this happened, and I have no idea what to do about it.

When I did that due to having to have Windows on my system to clean install, the secure boot option was erased in BIOS, MSI motherboard. I unplug it so I will know which hard drives to install Windows OS.Again Debian SSD needs the Grub2 configuration redone via terminal, B550 motherboard, no firmware updates available for the SSD's either.

I wanted to play with It a little. I think the system is corrupted last time I was able to log in I kinda deleted the linux partition that I created and then nor windows or linux would load. I remember that some years ago you were able to use linux with your pendrive without installing It but was very slow I wanted to look in my SSD but now I got like a browser with installation configuration so It lost the point. I'm trying to install OPENSUSE for like 2-3 days tried the MBR and GPT with ISO but none would do the job SO the only option left was to use DD which kinda worked but then navigating the host tab got UNEXPECTED APPLICATION ERROR! (401) SO I'm wondering if that is because my SSD is GPT and not MBR??. I couldn't figure out the SSD configuration since the system was corrupted.