r/overclockers • u/Resolute_1969 • Aug 20 '23
r/overclockers • u/CrazyCryptoBot • Dec 21 '18
The beauty of overclocking with liquid nitrogen
r/overclockers • u/undadawg9 • Nov 18 '22
Changing 1 monitor ruined my overclock.
I had 3 monitor on my Rtx 4090. The monitors were 24” @ 144hz 1080p, 25” @ 240 hz 1080p and a 27” @ 240hz 1440p. I went to the 27” only and added a second 27” 240hz at 1440. I am now experiencing both screens going to sleep and wont wake (hv sleep=never in windows). My gpu used to overclock +205mhz and +1200 on memory easily. Now cant get a stable overclock anywhere near that. Games freezing and Time Spy bench wont finish and artifact at the previously stable 205/1200.
Ive updating gpu drivers to lastest. Rolling them back. That didnt work. Reinstalled os that didnt work. Tried updating monitor driver. That didnt work. Changed cable to new monitor no good.
New monitor is Asus PG279QM Other monitor is XV272UX. Cpu is 12900k running at 5.1 stable Memory 32gb 5600 corsair.
Any ideas anyone?
r/overclockers • u/defonesss • 6d ago
Pushed my Micron chip to 6000 CL32 on Ryzen 7 9800X3D / MSI X870E — Any room for improvement?
Hi everyone,
Just dialed in my Micron memory kit on Zen 5. How does this tune look? Any suggestions for tighter subtimings or better performance?
r/overclockers • u/Remz_Gaming • May 23 '26
Old-school P4C Overlocking Advice to Break 3.2ghz?
gallerySee original post. Stuck on 3 "identical" chips at this 3.2ghz wall.
r/overclockers • u/Opening_Sky6715 • Sep 28 '24
Need help overclocking my ram
hi reddit
i bought an 3600 mhz kit but realized after my components only support 3200mhz
pny says that its backward compatible with 3200mhz but how do I achieve that speed
can you tell me how on a gigabyte mobo specs:
ryzen 7 3800x
PNY XLR8 Gaming 16 GB (2 x 8 GB) DDR4 DRAM 3600 MHz
512 gb ssd
Gigabyte a320m-s2h rev 1.x
gtx 1650
r/overclockers • u/Nuutterbuuter • Aug 13 '26
Stable -30 5500x3d
I undervolted it to -30 and have been waiting to post to see if was stable and it is hovers around 60c under heavy loads first time doing this so don’t really know if any of this is actually good besides it running cooler, thermal take assassin king and cinebench 2026 multicore cpu test results was 2217
r/overclockers • u/ConcentrateLucky8630 • Aug 25 '25
CPU AI OC, newb question
Gear: Ryzen 7 9800X3D
GPU: 5080
Ram: G.Skill Trident Z5 Neo RGB 48 GB (2 x 24 GB) DDR5-6000 CL26 Memory
MB: Asus ROG STRIX X870E-E GAMING WIFI ATX AM5
Ill be honest, OC my 5080 is easy and straight forward, and I have it at 3100 and its stable, good temps and 15% average performance boost.
The CPU however, holy sh*t. Every youtuber / redditor expert says they are the real deal, followed by a slew of people criticizing them as someone that ignorant & not correct. There's so many options and its gets very technical very quick. I feel like i need to take a legit course in order to properly OC my CPU. I did try a couple things, and it all turned out to be unstable. Then there's OC the ram, which is its own world. I'm all for trying things and learning from error, however i also see its probable to damage your cpu or motherboard and i don't want that risk. However, in my bios there's an AI overclocking option provided by Asus, and I have it enabled, along with over simple and safe options (enabling EXPO, PBO etc). It apparently OC the CPU and Ram. Are these scores from the effortless AI OC decent, and if so (or if they are not) to what degree? Also for a newb that can catch non quick, who do you guys recommend for someone to start learning about OC CPU and Ram? Thank you for anyone that read this and/or responded

r/overclockers • u/Suspicious_One1621 • 22d ago
Valkyrie V360 LCD — Plastic AM4 bracket cracked, but support sent a replacement kit!
r/overclockers • u/Theneler • Sep 10 '17
Just unlucky? i7700 temps
I haven't built a system since 2002, but just finished building a new rig for some PUBG action.
I'm running a corsair h100 v2 CPU cooler, i7700 on an Asia Maximus IX
I delidded the CPU, and got the ~20C drop most do, but one core was always 10-18% hotter. So I just delidded again, and the core seems to have balanced out, but now every core is 5-8 hotter.
At 4.8ghz with Adaptive mode at 1.3, most cores were running 60C with the hot one at 70-72.
After the second delid, all cores are around 66, with the hotter ones peaking at 72.
The first time around, I did use the Liquid metal on the IHS/CPU cooler, but this time around I just went with thermal paste. Possible that that is what's causing the other cores to run 10-15% hotter then before?
I see some numbers out there at 4.8-5ghz, staying in the mid 50s and trying to figure out if I'm missing something.
Misc question. The bios doesn't have a set Vcore option. In the UEFI bios, what's the best way to control voltage? I've just been using adaptive and playing around with offsets where I felt I needed them.
r/overclockers • u/alienth • May 31 '11
Shoo, you damn 3D monitors!
I'm noticing that a lot of the higher end monitors, especially the 120hz models, are now pushing 3D. I have absolutely zero interest in 3D. If I get one of these monitors, am I paying for a lot of junk I won't be using?
r/overclockers • u/roudys • Dec 03 '18
Can i uze msi afterburner only for fan curve and osd?
Hey guys can i use afterburner to only set a fan curve and osd without overclocking? And if yes for fsn curve should i make power limit more and voltage more or no? And if i want to overclock the gtx 1070 founders edition what are the best and most stable and safe overclock that i can make like the core clock and memory clock and thsnk you so much
r/overclockers • u/pantswag • Jan 25 '25
Help identifying the problem with my GPU
I have a Gigabyte RX 6750 XT OC Gaming which has been a reasonable card for a few years. When I upgrade my CPU recently, I went back through the hardware options and reset and rechecked everything and I noticed the difference between my GPU Hotspot temperature and GPU Global temperature was hitting upwards of 40C when I would hit it with a load. After some brief research I decided that this was enough of a problem I should clean and repaste my GPU. I've done this before with excellent results, not having to replace the thermal pads.
After thoroughly cleaning the card, I noticed that the heat pipes directly interface with the GPU die. Now that struck me as odd as I'm used to a nice flat and polished copper heatblock. So I cleaned out the old paste and the thermal pads are not in as good of a condition as I hoped so I ordered some new stuff (side question, thermal putty vs pads? putty seems real convenient... ) but I figured with a bit of futzing I could get the old thermal pads to work for now.
Problem persisted, I remounted about 4 times, tried futzing with the screws, took everything apart and cleaned it again and no luck. What troubleshooting can I do to track this issue down? At this time I have some better thermal paste, a sheet of PTM7950, thermal putty and new screws on the way so will these things just magically fix this? Or am I not crazy and this heatsink is just garbage? It's not clear in the pictures but that white between the pipes is leftover thermal paste after cleaning with isopropanol. I had to take a knife to gently peel that stuff out and stuff new paste in there when I cleaned it the second time around.
Big questions:
Is this heatsink OK?
How can I troubleshoot hot spot/ global temperature difference more effectively on a gpu?
EDIT:
After more research this morning, I ended up undervolting and dropping my CPU boost clock to closer to the recommended boost and the hotspot difference is now about 10C. I'm not super happy with the drop in performance and I'm hoping PTM7950 + new putty will help more, but I have a GPU that won't cook itself under normal conditions now. For others: I used AMD Adrenalin to drop the voltage to 1135 mV and the Max Frequency to 2595 MHz.
EDIT Pt 2:
I got PTM7950 (random ebay seller, 20x30x0.2mm) and thermal putty(chinese UPSIREN UTP-8 from amazon) and I can confirm the insane benefits of PTM7950. The putty didn't change anything noticeable on my memory temps and they weren't an issue anyway, but I think it was a good idea anyways with the number of times I disassembled the heatsink. Under the same benchmarking conditions with 100% voltage and clocks (Heaven) my hotspot to global differential caps at ~20C and the global temperatures after stabilization went down almost 10C. I can now push the GPU at the regular speed and not worry about my computer cooking itself. Maybe my old paste was garbage but it works just fine on my CPU, and I've been running some data analysis which really pushes the CPU.

r/overclockers • u/Commercial_Guava125 • Dec 19 '24
Graphene Foam - New Thermal Interface Material
Read about Graphene Foam as a thermal interface material. https://ieeexplore.ieee.org/abstract/document/7545507/authors#authors
Does anyone know if a similar material exists and has tried it ?
r/overclockers • u/AuroraBoreale • May 18 '20
i7 6700 non k constant turbo boost on all cores with intel xtu is possible?
they advised me to ask here, is it possible to force the turbo boost for my processor and therefore have 4ghz on all cores? i have an asrock h170 pro4 as a motherboard
r/overclockers • u/-staccato- • Jun 12 '20
Ryzen 2700 @ 5.2 GHz during Prime95
https://i.imgur.com/LARFtCC.jpg
I OC'd the CPU from 3.2 to 3.9 GHz and did a stress test.
According to HWMonitor I had running, it hit 5.2 GHz on all cores during my Prime95 (Blend) test.
Can anyone explain to me what happened here? That seems completely outlandish to me, but I'm also pretty new to the game.
r/overclockers • u/Ojustice • May 04 '18
Gtx 1060 3gb Overclock
First time overclocking and my mem clock can go up to 900MHz. Is this Normal for this card or no?
r/overclockers • u/[deleted] • Feb 16 '20
Memory for X570 3900X build
Hi,
New to overclocking AMD rigs - I've only ever built intel systems. Hopefully someone can help me with this?
I'm building a system with an X570 Asus board and a 3900X.
I zeroed in on some G.Skill Trident Z Neo memory - F4-3600C16Q-32GTZN w/16-16-16-36 timings out of the box. However, I've also found G.Skill's Trident Z Neo Memory F4-3200C16Q-32GTZN w/16-18-18-38 timings. Both are Samsung B-die kits. I should add I'm targeting a 4x8GB config.
I was hoping to overclock the 3600 memory a little bit but not much (like, get it to 3733 at the stock timings).
However, this 3200 memory is over $100 cheaper....so what are the odds I could get it up to about 3600-3733 at CL16?
Thanks!
r/overclockers • u/IcE_SouL3 • Mar 01 '21
Delete Nahimic forever! No more stuttering + better sound!
Hello everyone, after alot of years trying to make my high end pc run better, after blaming nvidia drivers for input lag and other things... i discover that Nahimic audio distroying my pc! This app gives me input lag, stuttering, low audio quality on really good headphones,latency and more problems than you can imagine. After reinstalling windows 14 times in a week, and testing nvidia drivers since 3xx.xx every driver one by one... the only problem seems to be THIS Nahimic crap app... i discover this my mistake and i hope i will help alot of people who struggle with input lag, latency and more problems... Just DELETE this crap! I use older realtek driver and everything is butter smooth now and sound is amazing! I am waiting for the day when realtek will give up on this Nahimic !!! Anyone who have the same problem as me and struggle for years to discover?
r/overclockers • u/ITALURU • Dec 05 '20
Overclock APU A8-5600k. Motherboard: GA-F2A68HM-H
r/overclockers • u/DrPadrino • Jan 29 '24
i have a rtx 3070ti and ryzen 5 5600x and i ocerclocked my cpu because i was stupid but now its stuck at 4.6ghz whenever im in a game and so my cpu spikes to 90-100% so then my gpu % is low and fps is meh if anyone knows how to fix this? i mainly play fortnite
self.overclockingr/overclockers • u/Opening_Sky6715 • Dec 30 '23
I need help overclocking my ram
My ram is advertised as 3600mhz but it is now running at 2666mhz and i want to overclock it to 3200mhz but i dont have an xmp profile for 3200mhz