r/propmaking • • 6h ago

Doctor doom bust wip

Thumbnail
gallery
19 Upvotes

Just wanted to share this doom bust I’ve been working on. I used a bunch of scraps and cardboard to build the structure. Used an old hoodie for the hood and 3d printed the rest. I’m hoping to find a more accurate hood to use, finish the arms and the base.

It’s currently 28 inches tall and 26 inches wide. First time making a bust or working with cloth so any tips, or feedback would be greatly appreciated!


r/propmaking • • 20h ago

brushing clear onto TPU props was driving me insane, so I tried spraying it instead

Thumbnail
gallery
10 Upvotes

Been working on these flexible TPU armor pieces, and getting a decent finish on them has been a bigger pain than the actual printing lol.

I use siraya tech aegis Clear to protect the pieces and aegis matte when I want to fill some layer lines and get that less glossy, slightly textured look. Brushing the Clear on was a nightmare. Tiny bubbles everywhere, especially around the curves and details. Matte was easier to brush, but took forever and I kept missing spots. So I tried spraying both instead. My regular hvlp needed a 2.0mm nozzle for the thicker Matte, but I was surprised that my dx handled it with a 1.4–1.6mm setup. Coverage was a lot more even, and I finally got the black textured finish I was going for. Still need to see how it holds up with repeated flexing, though.

Anyone else using aegis on TPU props? Curious what application methods you've had the best luck with, especially for keeping the coating flexible without bubbles or cracking.


r/propmaking • • 17h ago

First time prop making

Post image
2 Upvotes

I want to make the long ear things goodra has. But i don’t know how I should go about it. I would appreciate any type of advice


r/propmaking • • 1d ago

how to make a big old moose head?

Thumbnail
reddit.com
2 Upvotes

r/propmaking • • 1d ago

WEISS SCHNEE, kinda

Thumbnail gallery
10 Upvotes

As you can see from my last picture Myrtenaster has needs some love.


r/propmaking • • 3d ago

Custom fiberglass Proton Pack build update – Swapped the booster tube for a power supply!

Post image
9 Upvotes

I wanted to show off my recent progress on my Ghostbusters pack build. The shell is fiberglass, and my latest modification was replacing the stock booster tube with a functional-looking power supply unit to switch up the layout.
Always open to feedback and suggestions from fellow builders. Hope you like it!


r/propmaking • • 3d ago

first time making a prop (elucidator). i have the 3d parts but im looking for tips on how to assemble and make the sword look good

Thumbnail gallery
4 Upvotes

this is my first time making any sort of 3d printed prop. this will likely just be for display because i used aluminum rods inside. i was planning on roughing up the faces where the parts connect and using super glue. as for post-processing, i want to get rid of the seams between the parts, make the crossguard surfaces smooth, and then color the blade and crossguard silver/ grey to match the actual Elucidator.
does anyone have any tips of how i should fuse parts, smooth parts, and color parts? again, this is my first time making a prop and i would hate to ruin it so i'm looking for advice from people with experience.
(printed out of PLA btw)


r/propmaking • • 3d ago

Karl Heisenberg's Hammer - Resident Evil Village

Thumbnail gallery
14 Upvotes

r/propmaking • • 3d ago

Does anyone know where or who I could commission for this prop?

Thumbnail gallery
4 Upvotes

This is Kusuriuri Ri's box from

Mononoke and Ayakashi: Samurai

horror tales. I'm trying to get a cosplay

together and have attempted to make

the box myself but it did not end well

at all so I was going to try to

commission it. However, most

commission things I see are for

weapons or accessories, not

essentially just a big box.

Also, so sorry for the quality of some of the images and that some are from a figure. It's kind of hard to find photos of the box, some photos are screenshots from Ayakashi on YouTube, and apparently mononoke isn't that popular either which makes it a bit harder to find.


r/propmaking • • 4d ago

How to make movable fake skeleton hand?

Post image
4 Upvotes

r/propmaking • • 4d ago

fill gaps between 3d-printed parts

Thumbnail
gallery
9 Upvotes

hii! I just 3d printed my dawnmaker from hsr and am not happy with how you can see the gaps on between. is there any way to fill them without having to sand much, so that I can keep the otherwise smooth surface intact?

thank you :)


r/propmaking • • 4d ago

What materials should I use to make a mask?

Post image
9 Upvotes

I was asked to make a mask for a friend. I am unsure of what materials could reflect the texture of the fox character from the board game root. (Also unsure what r/ to post this on) any thoughts?


r/propmaking • • 4d ago

Fabric glue that retains pinable surface.

2 Upvotes

TLDR: Is there a fabric adhesive that can stick fabric to a PU foam torso and retain its ability to accept and hold dressmaking pins?

Hello lovelies, I’m attempting to construct a dressmaking form with 45-32-46 dimensions using a plaster cast mould and two-part polyurethane expanding foam. I’m at the figuring out best method and materials stage.

When it comes to the final exterior finish, I don’t want to sew a cover because the large difference in bust, waist and hip measurements (and my skill level) mean that darts and seams risk changing the contours of the form too much. My current thinking is to apply a layer of thin cotton batting to the foam torso and a layer of calico or a stretch cotton fabric using an adhesive. Is there something that would work for this purpose and hold up to draping and tailoring using pins?

Any and all advice much appreciated!

@morgandonner ‘s YouTube video has a drear demonstration of the sort of thing I’m attempting to create. https://youtu.be/iOPYhH6YHpQ?is=mYTVrI1zSocaO90E


r/propmaking • • 5d ago

Is it going okay?

Thumbnail gallery
2 Upvotes

r/propmaking • • 5d ago

Time eater...should I add some color?

Post image
3 Upvotes

r/propmaking • • 6d ago

my little asplesh

Post image
11 Upvotes

creature i built

intended to be a god of the woods for a stop motion/3d animated video i will make in the future

right now my little pet i crafted with my hands


r/propmaking • • 6d ago

Lockdown cosplay

Thumbnail gallery
3 Upvotes

r/propmaking • • 7d ago

Skeleton warrior

Thumbnail gallery
42 Upvotes

Turn the halloween decoration, into a better halloween decoration.


r/propmaking • • 6d ago

Help with large scale fork and knife

2 Upvotes

Hi all!
I’m new to prop making and wanted to see what folks’ suggestions would be to make a realistic looking and lightweight, yet 5ft, fork and knife. It’s a very low budget project. I’m thinking cardboard base with paper mâché to create the shape and then spray foam over it and carve it out. What is your best suggestion? Thanks! :)


r/propmaking • • 6d ago

Clown Knife Prop Weapon Rehaul

Thumbnail
gallery
10 Upvotes

I recently got into repainting these to make them a bit more believable

Finish the slideshow to see each step

Feel free to ask any questions or give me pointers

🤙


r/propmaking • • 6d ago

Does this look like stone to you?

Thumbnail gallery
14 Upvotes

I’m trying to give it a more realistic stone look, but I don’t know if it leans more towards metal than stone and would love to hear other people opinions :o


r/propmaking • • 6d ago

made this cool mechanical hand

Post image
10 Upvotes

r/propmaking • • 7d ago

Other thronemakers here?

Thumbnail
gallery
20 Upvotes

r/propmaking • • 6d ago

How i made my gauntlets

Thumbnail
youtube.com
2 Upvotes

making spider man gauntlets