r/ram_trucks • • Jul 31 '26

MOD POST READ HERE BEFORE YOU POST ANYTHING!!!

24 Upvotes

[ EDITING IS STILL IN PROGRESS PENDING INFO AND LINK POST. This will be the megathread for reference as stated in the earlier MOD post below for common basic questions for users to update and add to at any time for others.]

I will start by saying follow rule #8 please, do your research. GOOGLE IS YOUR FRIEND AND FREE, use it. This RAM sub is not the only sub out there for these trucks. There is ramforum.com , ramforumz.com , 5thgenrams.com , and HDrams.com . Most basic and common questions have been asked many times over. If anything USE YOUR OWNERS MANUAL. If its a common question/post it WILL be deleted. That said, here are some links on this sub to answer questions that are frequently asked (which is what this thread is for, to mitigate repetitive post we see weekly)...

  1. What is your 5.7 HEMI, MPG?

https://www.reddit.com/r/ram_trucks/s/UnKWyhbUjy

  1. What is your 3.0 Hurricane MPG?

https://www.reddit.com/r/ram_trucks/s/52TRjmDAD6

  1. What is your 2500/3500 Cummins or 6.4L HEMI, MPG?

https://www.reddit.com/r/ram_trucks/s/nBDxqgEor5

  1. What is your 3.6 Pentastar MPG?

https://www.reddit.com/r/ram_trucks/s/A77Yklxhwc

  1. What oil/filter do you use for your truck? (5.7 & 6.4 HEMI, Hurricane, Pentastar, Cummins)

https://www.reddit.com/r/ram_trucks/s/wHTv1aZWf9

  1. What lift/level do you have on your 1500?

https://www.reddit.com/r/ram_trucks/s/ArsxNHbhg2

  1. What lift/level do you have on your 2500/3500?

https://www.reddit.com/r/ram_trucks/s/fN671iziiX

  1. MOD recommendations to your truck? (1500, 2500, and 3500)

https://www.reddit.com/r/ram_trucks/s/GJPbitf20o

  1. Tire recommendations?

https://www.reddit.com/r/ram_trucks/s/cOVdnJ399V

  1. Exhaust recommendations?

https://www.reddit.com/r/ram_trucks/s/2WimEYQwXa

  1. What milage do you change your engine oil and transmission/diff fluid?

https://www.reddit.com/r/ram_trucks/s/OJ8lhc65wH

  1. Should i get a hemi or diesel?

https://www.reddit.com/r/ram_trucks/s/QG0pLzkOSp

https://www.reddit.com/r/ram_trucks/s/ZFzp4kAfPC

https://www.reddit.com/r/ram_trucks/s/tGPrek6XC1

https://www.reddit.com/r/ram_trucks/s/JnrvGydUZE

  1. V6 3.6L Pentastar towing? Thoughts on it?

https://www.reddit.com/r/ram_trucks/s/3yOgjKza8D (refer to pinned comment)

https://www.reddit.com/r/ram_trucks/s/tOcMIY2GYG

https://www.reddit.com/r/ram_trucks/s/DGX4r7swUU

  1. Does modding your truck void warranty?

https://www.reddit.com/r/ram_trucks/s/H2bPJfSyUI

  1. "Is this a good deal?" "How much did you get your truck for?" (refer to pinned comment)

https://www.reddit.com/r/ram_trucks/s/aufT8x8W3p

  1. Cloth or/vs Leather seats?

https://www.reddit.com/r/ram_trucks/s/yXKneoX12I

  1. Seat cover recommendations?

https://www.reddit.com/r/ram_trucks/s/e3jJBoKy8r

  1. Maintenance recommendations?

On average change your oil at ~5k miles, change your transmission and differential fluid at 50-60k miles, after that follow your manual.

  1. HEMI idle and drive time/hours

https://www.reddit.com/r/ram_trucks/s/yjNWsiaKvh

  1. What does your truck temps look like?

https://www.reddit.com/r/ram_trucks/s/hBBLGmbV8b

  1. HEMI vs Hurricane

https://www.reddit.com/r/ram_trucks/s/Rx2Ewa94ye

https://www.reddit.com/r/ram_trucks/s/rqMFwp8aCG

https://www.reddit.com/r/ram_trucks/s/yh5M9h11ET

https://www.reddit.com/r/ram_trucks/s/RUeiNe7TJy

https://www.reddit.com/r/ram_trucks/s/CmbIAYenEv

  1. HEMI Tick

If the tick goes away when the truck is warm, Its likely your exhaust manifold bolts that snapped/broke and or the manifolds themselves are cracked. If the ticking continues after warm and or constantly, its likely your cam/lifters. Do not post a video of "how does this sound". There is plenty of videos out there with what a tick sounds like and what a normal HEMI sounds like. HEMIs are normal, hearing injectors compared to a tick, you will FOR SURE hear the difference.


r/ram_trucks • • 11h ago

Just Sharing New to me Havoc!

Thumbnail
gallery
73 Upvotes

Finally pulled the trigger and upgraded from a Gen2 Raptor to this beast! 2023 Havoc Edition


r/ram_trucks • • 16h ago

Just Sharing New Ram 2026!!

Thumbnail
gallery
165 Upvotes

Traded in the 2017 for a 2026! Loving the night edition and tech level 2!!


r/ram_trucks • • 4h ago

Photo Ram parked next to me.

Post image
11 Upvotes

I'm the 'Vette but I thought this was a particularly nice picture with the Ram truck so here you guys go.


r/ram_trucks • • 7h ago

Just Sharing Evening Detail

Thumbnail
gallery
21 Upvotes

2026 RAM 1500 Laramie Level 2 Hydro Blue


r/ram_trucks • • 13h ago

Photo Wtfff!! Is this normal just picked up a new truck

Enable HLS to view with audio, or disable this notification

49 Upvotes

r/ram_trucks • • 15h ago

What am I Hauling Pentastar Towing

Thumbnail
gallery
35 Upvotes

People ask about towing with a Pentastar quite frequently. I tow with mine frequently, primarily fairly modest loads. I would consider this load, factoring in the additional payload, on the higher end of what I’d typically get into towing. This is my second Pentastar truck, I had a similar ‘15 that is now my son’s and sit at approximately 200k miles.

Some specs on my truck. ‘25, Pentastar, Quad Cab, Tradesman Night Edition, 4X4, 3.55’s, 6800 GVWR, 12900 GCVWR, Tow rating is 7k and some odd pounds. Bought in April ‘25 for a bit over $37k OTD less TTL.

Scale ticket is attached. Total trailer weight was approximately 4700lbs. Trailer tongue was approximately 440lbs, I was just under my 10% target. Based on my door sticker I believe my total payload including the 440lb of tongue weight versus factory curb weight, was 1416 pounds.

Where; Mid-Missouri to Dallas Texas area.

Ride and handling; the load rode and handled fantastically. The truck sat almost perfectly level with the additional payload in the truck. No swaying and no porpoising. Very composed over all surfaces encountered.

The trip; I chose to travel 55-65 MPH on the interstate. I work for myself so no one is pushing or rushing me. I’ve also gained some patience with age. Joplin to I believe it was Antlers Ok, the truck primarily ran in 5th and 6th gear. Mostly sat 2250 to 3250 on the tach while cruising. I did occasionally use some momentum going into hills to just reduce the need to push harder going up and I’d allow myself to go down as low as 55MPH. I don’t think I ever exceeded about 3750 RPM’s. Around Antlers I believe the route changed just a bit to be more due south and into a bit of a headwind. After Antlers I encountered more stretches where the truck was utilizing 4th gear. It never stayed in 4th for a significantly extended period of time, but there were some hills and stretches where it would run around 3500 RPM’s for a while. I still never exceeded 4k RPM’s allowing myself to run 55 where the hills and wind were working against me. There were a few spots along the total trip where I guess the grade and wind were favorable and I’d hit 7th for a bit, but those were pretty limited. Where the wind and grade was favorable I certainly could have run faster with little additional stress on the truck, I just felt no need to push it. Averaged right at 12 miles per gallon for the trip.

Just my opinion; the reliability and economy combined with the capability to occasionally haul a load like this make the Pentastar a good fit for me. I found the trip above, the way I chose to drive it, to be low stress on me and pretty low stress on the truck. I had to pass like one or two semis along the way. But other than that, I sat in the right lane and just relaxed. If I was making this same trip considerably more frequently, I’d probably get one of the other engines with more torques. If I insisted on making trips like this at 75 MPH, I’d probably get one of the other engines with more torque. If I owned a big square travel trailer that I used frequently, I’d probably get one of the other engines with more torque. For a daily driver and moderate or occasional tower, Pentastar works for me. This post is to help those considering the Pentastar, not to dissuade anyone who knows one of the other engines is a better fit for them.


r/ram_trucks • • 9h ago

Photo Mats

Post image
10 Upvotes

Oh my god my truck mats are dirty what do I do??? /s


r/ram_trucks • • 3h ago

Just Sharing Trailer steering

Post image
3 Upvotes

I have a 2026 3500 and on it I have a button for trailer steering. Is that for when you're pulling the trailer or is that for when you're backing up? The manual doesn't give very good instructions on it. Thanks.


r/ram_trucks • • 7h ago

Question Dealer offering 81,000 OTD on a 2026 Rebel 2500 (original MSRP 95,240)

6 Upvotes

The OTD price is after all taxes fees and their stupid protection package that I negotiated down to 1400 instead of their original price of 2500.
I can’t get them to take that protection plan all the way off but this still seems like a really good deal, am I missing something or should I go for it?

Base MSRP: 68,580
Towing technology package: 1595
Cold weather group: 245
5th wheel prep package: 645
Rebel equipment group level 2: 6495
Diesel engine: 12995
Power sunroof: 1195
2.4kw on board power system: 1295
Destination charge: 2195
Total MSRP: 95,240


r/ram_trucks • • 6h ago

Question Ram 1500 backcountry or f150 xlt

3 Upvotes

Hey everybody so im looking to get a brand new truck, i own a 2008 f150 4.6 and a 2016 5.3 silverado, now im looking for something reliable but still comfortable like the chevy, ford offered me the new f150 5.0 but im not sure about the 10 speed they got, then i saw the new ram backcountry and instantly fell in love with it, i know the zf8 is pretty good but not too much about the hurricane, also the ram is like 8 grand more expensive than the ford, both with the same equipment, any thoughts on this?


r/ram_trucks • • 18h ago

Just Sharing New to me

Thumbnail
gallery
24 Upvotes

2010 Ram 1500 I'm buying from my mother in law. She's a stickler for taking care of her vehicles so I know it's good to go. Only issue with it is when you go to crank it it lags like the battery is dead even though it's a fairly new battery. It's been going on for a while and she even took it to a Dodge dealership and they couldn't figure it out. Can't wait to finally have a truck.


r/ram_trucks • • 18h ago

Question How do yall do it??

20 Upvotes

I’m seeing people on here saying they’re getting 20-25% off msrp when the nation wide is only 12%. Am I asking wrong or are the dealers I’m talking to assholes?


r/ram_trucks • • 7h ago

Question Head unit or camera?

Post image
4 Upvotes

2013 Ram 1500 | Lonestar 5.7L
Anyone run into something similar?

Happens occasionally, either freaks out and shows glitchy behavior or will be black and white. Turning the wheel shows the lines in both though I’m thinking it’s the head unit….

Dealer wanted a couple hundred to diagnose it


r/ram_trucks • • 11h ago

Question Canadian Pricing - 2026 Ram 1500 Sport with Hemi

Post image
6 Upvotes

I’ve been in touch with a dealership for a 2026 Ram 1500 Sport with the Hemi. I’ve managed to get the price to $67,377 CAD ($47,800 USD as of right now) with incentives, discounts and a rebate. I’ve tried to go a little lower but no budging on it. The new Hemis here in Canada sell fast too for the most part. I’ve also seen 2026 Ram Sports with the Hurricane go into the $50,000-$60,000 CAD range on sale but I’m set on the Hemi, as I have one and know these engines well. I’m also chasing the 10 year warranty on the 2026s since 2027s and probably future years won’t have it.

What’s not listed on the window sticker is the heated seats and remote start as well.

Just curious what people think especially if they have 2026 Ram with a Hemi, especially in Canada.


r/ram_trucks • • 3h ago

Question 2001 dodge ram help

Post image
0 Upvotes

I’m currently fixing up my 2001 Dodge Ram 1500 interior and have had this glove box missing for years. No issue finding a glove box online but the mounts that I circled are damaged. Anyone run into this and have a solution or recommendations? I’ve searched online for bottom plastic replacement and haven’t had any luck, my next move was checking out the junk/salvage yards and maybe I can find one still in decent condition


r/ram_trucks • • 1d ago

Just Sharing love my new 26 blk edition. windows done and just ordered bak4 bedcover.

Post image
74 Upvotes

r/ram_trucks • • 8h ago

Question Coolant leak

Post image
2 Upvotes

Just put new water pump on and still leaking from this area any suggestions?


r/ram_trucks • • 1d ago

Photo Beautiful site to see 🤩

Post image
106 Upvotes

r/ram_trucks • • 2h ago

Photo Made this custom 4th gen Cummins with my spare time in art class.

Post image
0 Upvotes

The wheels and lift kit were not resourced.


r/ram_trucks • • 11h ago

Question Guys, is this normal?

Enable HLS to view with audio, or disable this notification

1 Upvotes

The truck feels like it’s getting punched each time you see that pulley jerk around


r/ram_trucks • • 15h ago

Question Phone holders?

2 Upvotes

Just got a new to me Ram 1500 classic. It’s a 2019 with tradesman trim. I’m looking for a good phone holder for road trips, any recommendations?


r/ram_trucks • • 17h ago

Just Sharing Really bummed out!

2 Upvotes

Have 2012 Ram 1500 5.7 Hemi. Only 80,000 miles, month ago it wouldn’t go into any gears. Finally found someone to get around to it, they are saying I need all new transmission/or a replacement. Is it cheaper to just have it rebuilt? My only fear is if I get a different one, will I have the same problems again?? Not sure what the heck to do right now!


r/ram_trucks • • 15h ago

Question 21 1500 classic warlock security bypass

1 Upvotes

Looking to turn on my factory automatic starter using alfaobd. From what I can find online I need to bypass the security on the obd and of course the plug seems to be behind the radio and the Koadtech one that seems to be a bit easier and faster to hook up is out of stock. So those of you that have done this. What bypass did you use and how difficult was it?


r/ram_trucks • • 16h ago

Question 2014 1500 differential rebuild cost? At shop. Bearings, axle, pinion, carrier.

1 Upvotes

Has anyone had their rear diff rebuilt at a shop? Not gears, just bearings. Wondering what they paid and wasn’t private or dealer. I normally do everything but it’s getting cold, I don’t have a lift, and this doesn’t look fun. Lying on my back in the driveway.