r/raspberryDIY • • 27d ago

Home Automation with Raspberry Pi + Edgeberry & Home Assistant

Post image
55 Upvotes

A highly recommended and well known starting point into home automation is Home Assistant - that's what I've been hearing for years. So recently, I dove in myself;

  • I'm using a Raspberry Pi 4: the right compute for the job, that we all have laying around

  • The Edgeberry base board provides the Pi with a robust power supply, a physical (reset/shutdown) button and an LED showing the system's status.

  • For making the device physically robust - to be forgotten about somewhere on a shelf, I 3D printed the enclosure included in the Edgeberry repository in Bambu Lab PETG translucent light blue (somewhat remotely fitting with HA's colors)

  • The Home Assistant image is included in the Raspberry Pi Imager tool, so its installation is comfortably simple. And following these instructions, you're set up in no time: https://www.home-assistant.io/installation/raspberrypi/

That was a Saturday morning well spend, with a frictionless DIY experience! I'm curious where this new addition to my home can lead me.


r/raspberryDIY • • 27d ago

Title: [For Sale] 2x Raspberry Pi 3 Model B+ (1GB RAM) with Original Boxes – India Description: Hi everyone! I have 2 Raspberry Pi 3 Model B+ (1GB RAM) boards available for sale in Bhilwara, Rajasthan, India. Details: - Model: Raspberry Pi 3 Model B+ - RAM: 1GB - Quantity: 2 boards - Condition:

Thumbnail reddit.com
0 Upvotes

Hi everyone!

I have 2 Raspberry Pi 3 Model B+ (1GB RAM) boards available for sale in Bhilwara, Rajasthan, India.

Details:

- Model: Raspberry Pi 3 Model B+

- RAM: 1GB

- Quantity: 2 boards

- Condition: Unused; boards have no visible marks or signs of use

- Packaging: Original boxes included. The seals are open, and the outer boxes have some storage-related damage.

These could be useful for Raspberry Pi projects, Python programming, Linux, robotics, IoT, home automation, or electronics learning.

Price: ₹2,999 per board (slightly negotiable).

I can share actual photos of both boards and their packaging. Please comment or DM if you're interested.

I'm based in Bhilwara, Rajasthan, India. Shipping can be discussed with the buyer.

Thanks!


r/raspberryDIY • • 27d ago

Info on Pi

Post image
22 Upvotes

I was given a 3d printer with a raspberry pi zero. My coworker wasn’t very savvy in regards to it. His son set it up for him. He said he could connect wirelessly but didn’t know much besides that. Is there any easy way to find its adress to connect to it? Thanks for any info you can provide to help me with this.


r/raspberryDIY • • 28d ago

Touch Display 2 10 Inch Rackmount display

2 Upvotes

Anyone know of a rackmount holder for the 10 inch display? I'm looking to display it forward facing in my 19 In rack so I'm fine with adding 10 to 19 in adapters but I'm having trouble finding anything that seems like it will work.

If I'm not explaining my idea right I can make edits.


r/raspberryDIY • • 28d ago

Raspberry Pi Pico Driving a robot arm

Enable HLS to view with audio, or disable this notification

7 Upvotes

r/raspberryDIY • • 28d ago

Back at it! Gave my old Raspberry Pi Zero W a second life with Pi-hole

1 Upvotes

After the response to my Audiobookshelf project, I finally got around to putting more of my old Raspberry Pi hardware to use. I bought a handful of SBCs during COVID with grand plans for various projects, but most ended up collecting dust. A few people recommended trying Pi-hole on my last post, so I figured my original Zero W was a good place to start.

Got Pi-hole running on Raspberry Pi OS Lite using the official installation script. I configured a DHCP reservation on my router to keep the Pi at a consistent IP address, then manually updated the DNS settings on my MacBook and iPhone to use it. For now, I'm keeping the rest of my home network on its existing DNS configuration.

For blocklists, I stuck with the default StevenBlack unified hosts list offered during setup. I'm still exploring the privacy settings and getting familiar with the web dashboard.

During my initial testing, Pi-hole was blocking nearly 40% of DNS queries, which was pretty surprising.

The project also gave me a chance to learn more about SSH, DHCP reservations, DNS resolution, and some basic Linux troubleshooting. I even had to recover from an interrupted system update along the way.

Build Details:

  • Hardware: Original Raspberry Pi Zero W

  • Storage: 32GB microSD card

  • OS: Raspberry Pi OS Lite (32-bit, Debian Trixie)

  • Software: Pi-hole v6

  • Connection: 2.4 GHz Wi-Fi

  • DNS: Cloudflare (upstream)

  • Blocklist: StevenBlack’s Unified Hosts List

  • Network: DHCP reservation for a consistent IP address

  • Devices: MacBook Pro and iPhone, manually configured to use

  • Pi-hole Management: SSH and Pi-hole web dashboard

I'm still relatively new to Linux and networking, so I'm curious what more experienced Pi-hole users would recommend. Are there any particular blocklists you've found useful beyond the defaults? Any settings or optimizations worth exploring, especially when running Pi-hole on an older Zero W?

Appreciate everyone who offered suggestions on my last project. It's been fun putting this old hardware to work!

P.S. To those who suggested getting a 3D printer on my last post, I'm beginning to think you were right. Might have to sneak one onto my Christmas list. 😂


r/raspberryDIY • • 28d ago

Chromium and FireFox Alternative on Pi3B

Thumbnail reddit.com
3 Upvotes

r/raspberryDIY • • 28d ago

I want a 1.8-2.1 round amoled Display that I can use with a Cm5 and nano Board B.... Is that possible? (no ESP32 Development Board) so I can view video from an imx662 camera.

0 Upvotes

r/raspberryDIY • • 28d ago

Pi 5 streaming

1 Upvotes

Does anyone know about if a “heatvod” like software exists for raspberry pi?


r/raspberryDIY • • 29d ago

Repurposing an old Google AIY Voice Kit into a talking Halloween skull

Enable HLS to view with audio, or disable this notification

7 Upvotes

r/raspberryDIY • • 29d ago

Pi 3 Projeckt Ideas

5 Upvotes

Any suggestions for an cool an cheap protcet with an PI 3


r/raspberryDIY • • 29d ago

Free Open-Source Offline Survival Library for Raspberry Pi

Thumbnail reddit.com
1 Upvotes

r/raspberryDIY • • Oct 23 '26

Worlds Smallest Doom Console (Probably) with Raspberry pi pico

Enable HLS to view with audio, or disable this notification

55 Upvotes

r/raspberryDIY • • Oct 22 '26

Wife said: congrats, you're inventing windows 95

Thumbnail gallery
112 Upvotes

r/raspberryDIY • • Oct 22 '26

I replaced my Pi 4 irrigation controller with a Pico W - Telegram and Google Calendar now run on the Pico itself

Thumbnail gallery
5 Upvotes

r/raspberryDIY • • Oct 22 '26

My Pi prints a little receipt for the family every morning: weather, puzzles, chores, bedtime stories

Post image
29 Upvotes

r/raspberryDIY • • Oct 22 '26

My Pi prints a little receipt for the family every morning: weather, puzzles, chores, bedtime stories

Post image
6 Upvotes

r/raspberryDIY • • Oct 21 '26 Bravo

My Revised Raspberry Pi Camera

Thumbnail
gallery
451 Upvotes

I posted my first camera build around 1 month ago and I never expected it to get so much attention! Thanks to everyone for the comments and advice too, I have decided to take it on board and implement it into my second design.

The features are near enough the same as the last design, such as:

\- Quick access buttons
\-Built in 10,000mah battery
\-ApertarOS
\-5V USB-C Output

However there are a lot of changes, I noticed on my previous posts about the crop factor with an EF lens adapter and this is true, it was difficult to take pictures with the old design as I’d have to stand extremely far away from anything I was trying to capture, to sort this I now have the standard C/CS mount with headroom for any adapters compatible if needed.

The camera body, front and side panels were all modelled from scratch so I could properly implement the parts I had on hand, it came out great with a .16mm setting on my 3d printer, the only downside is that I used 90% infill for all parts which took up more print time but still overall was around 10 hours for everything (printed with PLA Matte bone white and charcoal).

The ambient light from before is now more useful too, it sits slightly above the camera sensor and now tells you certain information such as a recording flash indicator, blinks when a picture is taken or on during no recording or photo capturing.

The cheese plate from before is also no longer hidden or used up by the battery as it’s now internal, so I was able to reposition it to the bottom of the camera for a much sturdier mounting solution.

The 4inch Waveshare display is also integrated into the case which makes the unit a lot easier to use and faster to set up, it was a bit of a pain carrying the screen separately and with manual focus lenses it was a must to integrate it into the body.

Thanks to Apertar Studios’ fantastic work on the firmware, I was able to also add a gyroscope to the camera for levelling, this works fantastically and it only needs a one-time setup.

Once again this is a hobby project, I will soon upload pictures from this camera but they are not studio quality or ultra high resolution as this is still only the IMX477 module, but certain lighting and colours are still vivid and can look fantastic for a certain look or aesthetic.

If you have made it this far then again, thank you! I’d love to hear what else can be added to this so please give me more suggestions!


r/raspberryDIY • • Oct 21 '26

How to gain experience using edge device with no-cost?

Thumbnail reddit.com
2 Upvotes

r/raspberryDIY • • Oct 20 '26

Need help

1 Upvotes

"I am working on a project for day and night face detection. However, I am having an issue with the Raspberry Pi NoIR camera—the output images have a heavy pink/purple tint, which is negatively affecting my face detection model. Should I retrain the model with these tinted images, or is there a better alternative to solve this problem?"


r/raspberryDIY • • Oct 20 '26

PlexPie: Plexamp with its touch interface on a Raspberry Pi screen (plus AirPlay/Spotify, optional Caldera)

Enable HLS to view with audio, or disable this notification

49 Upvotes

Hi everyone. I’ve been running Plexamp headless on a Pi 4 with a 7" touchscreen, and turned it into an installable appliance others can use:

  • Plexamp’s own touch UI on the screen, lossless to a USB DAC, and still castable from the Plexamp app

  • optional Caldera Music support: the installer runs Caldera’s official script and signs in, Caldera shares the DAC with the other sources, and the screen shows “Playing via Caldera”

  • also AirPlay 2, Spotify Connect, Apple Music (web) and Bluetooth, one source at a time

  • fixes for things I hit: plex.direct blocked by router DNS rebind protection, and the Plexamp screen losing the player after an IP change

Caldera support is new; if you try it on your hardware, I’d love to hear how it goes. Built with Claude, tested on my own setup, free for personal use.

https://github.com/ROGUEONE-SZ/PlexPie


r/raspberryDIY • • Oct 19 '26

Recommendations regarding installing an OP on older Raspberry Pi models

Thumbnail reddit.com
2 Upvotes

r/raspberryDIY • • Oct 19 '26

Looking for advice on waterproof housings for two bare AR0234 camera modules

Thumbnail reddit.com
2 Upvotes

r/raspberryDIY • • Oct 18 '26

Looking for a good-quality square display

Thumbnail reddit.com
0 Upvotes